Manufacturing Review

Open Access

Fused filament fabrication: comparison of methods for determining the interfacial strength of single welded tracks 32

Anselm Heuer, Jonas Huether, Wilfried V. Liebig and Peter Elsner

Published online: 21 December 2021

DOI: https://doi.org/10.1051/mfreview/2021031

• Abstract
• Full HTML
• PDF (3.376 MB)
• ePUB (4.738 MB)
• References

Open Access

Review

Reinforcements, production techniques and property analysis of AA7075 matrix composites − a critical review 31

Sowrabh B.S., Gurumurthy B.M., Shivaprakash Y.M. and Sathya Shankara Sharma

Published online: 13 December 2021

DOI: https://doi.org/10.1051/mfreview/2021029

• Abstract
• Full HTML
• PDF (5.082 MB)
• ePUB (3.842 MB)
• References

Open Access

Modelling and Simulation of Machining Attributes in dry Turning of Aircraft Materials Nimonic C263 using CBN 30

Srinivasan Senthil Kumar, Moranahalli Ponnusamy Sudeshkumar, Chakaravarthy Ezilarasan, Sivaprakasam Palani and Jayaseelan Veerasundaram

Published online: 06 December 2021

DOI: https://doi.org/10.1051/mfreview/2021030

• Abstract
• Full HTML
• PDF (3.974 MB)
• ePUB (4.097 MB)
• References

Open Access

Review

Welding of magnesium and its alloys: an overview of methods and process parameters and their effects on mechanical behaviour and structural integrity of the welds 29

Desmond Edem Primus Klenam, Gabriel Seun Ogunwande, Taiwo Omotosho, Blessing Ozah, Nthabiseng Beauty Maledi, Silas Ithete Hango, Adefunke Abosede Fabuyide, Lesego Mohlala, Josias Willem van der Merwe and Michael Oluwatosin Bodunrin

Published online: 23 November 2021

DOI: https://doi.org/10.1051/mfreview/2021028

• Abstract
• Full HTML
• PDF (1.739 MB)
• ePUB (2.566 MB)
• References

Open Access

Business model and methods of evaluation in sustainable manufacturing 28

Haishang Wu

Published online: 17 November 2021

DOI: https://doi.org/10.1051/mfreview/2021026

• Abstract
• Full HTML
• PDF (1.517 MB)
• ePUB (1.889 MB)
• References

Open Access

Comparative investigation of the influence of kaolin and dolomite on the properties of polyurethane foam 27

Joseph Ajibade Omotoyinbo, Isiaka Oluwole Oladele, Jamiu Mosebolatan Jabar, Joseph Olatunde Borode, Kenneth Kanayo Alaneme, Akeem Damilola Akinwekomi, Samuel Ranti Oke, Taiwo Fisayo Omotosho and Lawrence Ojo Saliu

Published online: 01 November 2021

DOI: https://doi.org/10.1051/mfreview/2021025

• Abstract
• Full HTML
• PDF (2.198 MB)
• ePUB (2.049 MB)
• References

Open Access

A combination method for multi-criteria decision making problem in turning process 26

Do Duc Trung

Published online: 12 October 2021

DOI: https://doi.org/10.1051/mfreview/2021024

• Abstract
• Full HTML
• PDF (476.0 KB)
• ePUB (1.302 MB)
• References

Open Access

Spark plasma sintering of CNT-NiAl nanocomposites – Process parameter, densification mechanism, and grain analysis 25

Olusoji Oluremi Ayodele, Mary Ajimegoh Awotunde, Bukola Joseph Babalola and Peter Apata Olubambi

Published online: 23 August 2021

DOI: https://doi.org/10.1051/mfreview/2021023

• Abstract
• Full HTML
• PDF (2.785 MB)
• ePUB (3.110 MB)
• References

Open Access

Finite element simulation and regression modeling of machining attributes on turning AISI 304 stainless steel 24

A. Mathivanan, M.P. Sudeshkumar, R. Ramadoss, Chakaravarthy Ezilarasan, Ganesamoorthy Raju and V. Jayaseelan

Published online: 17 August 2021

DOI: https://doi.org/10.1051/mfreview/2021022

• Abstract
• Full HTML
• PDF (5.245 MB)
• ePUB (8.851 MB)
• References

Open Access

Research on the electric field intensity distribution of high-voltage cable terminal improved by non-linear material 23

Guowei Li, Yong Wang and Xuexia Xu

Published online: 19 July 2021

DOI: https://doi.org/10.1051/mfreview/2021018

• Abstract
• Full HTML
• PDF (686.6 KB)
• ePUB (1.279 MB)
• References

Open Access

Studies on corrosion behaviour of sintered aluminium based composites in chloride environment 22

Samuel Olukayode Akinwamide, Miltia Lesufi, Ojo Jeremiah Akinribide, Bukola Joseph Babalola and Peter Apata Olubambi

Published online: 19 July 2021

DOI: https://doi.org/10.1051/mfreview/2021021

• Abstract
• Full HTML
• PDF (2.123 MB)
• ePUB (2.693 MB)
• References

Open Access

The effect of rotational speed on quality of sound vertical centrifugal castings tin 21

Mahantesh S. Tattimani, Maheswar C.Y., Babu Reddy, Shrikant Badi, Ambadas and Anandkumar S. Malipatil

Published online: 12 July 2021

DOI: https://doi.org/10.1051/mfreview/2021020

• Abstract
• Full HTML
• PDF (4.433 MB)
• ePUB (4.148 MB)
• References

Open Access

Investigation into color designs of product packaging through visual evaluations using machine learning methods 20

Yang Gao

Published online: 08 July 2021

DOI: https://doi.org/10.1051/mfreview/2021019

• Abstract
• Full HTML
• PDF (562.5 KB)
• ePUB (1.122 MB)
• References

Open Access

Residual stress effects on fatigue crack propagation in Butt–Welded joints for 304 stainless steel sheets 19

Eman El Shrief, Abla El-Megharbel, Aly El Domiaty and Hassan Abd El-Hafez

Published online: 06 July 2021

DOI: https://doi.org/10.1051/mfreview/2021017

• Abstract
• Full HTML
• PDF (1.997 MB)
• ePUB (2.456 MB)
• References

Open Access

A holistic End-of-Life (EoL) Index for the quantitative impact assessment of CFRP waste recycling techniques 18

Dionysios N. Markatos, Christos V. Katsiropoulos, Konstantinos I. Tserpes and Spiros G. Pantelakis

Published online: 28 June 2021

DOI: https://doi.org/10.1051/mfreview/2021016

• Abstract
• Full HTML
• PDF (1.016 MB)
• ePUB (1.488 MB)
• References

Open Access

Experimental investigation and optimization of wall deflection and material removal rate in milling thin-wall parts 17

Gururaj Bolar and Shrikrishna Nandkishor Joshi

Published online: 24 June 2021

DOI: https://doi.org/10.1051/mfreview/2021015

• Abstract
• Full HTML
• PDF (5.388 MB)
• ePUB (5.768 MB)
• References

Open Access

Multi-response optimization in wire electrical discharge machining (WEDM) of D₂ steel using utility approach 16

Ipsita Nayak and Jaydev Rana

Published online: 04 June 2021

DOI: https://doi.org/10.1051/mfreview/2021014

• Abstract
• Full HTML
• PDF (586.7 KB)
• ePUB (1.410 MB)
• References

Open Access

Empowering ISA95 compliant traditional and smart manufacturing systems with the blockchain technology 15

Erkan Yalcinkaya, Antonio Maffei, Hakan Akillioglu and Mauro Onori

Published online: 18 May 2021

DOI: https://doi.org/10.1051/mfreview/2021013

• Abstract
• Full HTML
• PDF (1017 KB)
• ePUB (1.570 MB)
• References

Open Access

Review

A review of the techniques used to characterize laser sintering of polymeric powders for use and re-use in additive manufacturing 14

Fredrick Mulinge Mwania, Maina Maringa and Jacobus G. van der Walt

Published online: 29 April 2021

DOI: https://doi.org/10.1051/mfreview/2021012

• Abstract
• Full HTML
• PDF (3.330 MB)
• ePUB (4.262 MB)
• References

Open Access

MQL Machining with nano fluid: a review 13

Pralhad B. Patole, Vivek V. Kulkarni and Sudhir G. Bhatwadekar

Published online: 27 April 2021

DOI: https://doi.org/10.1051/mfreview/2021011

• Abstract
• Full HTML
• PDF (1.513 MB)
• ePUB (2.742 MB)
• References

Open Access

Comparison of conventional drilling and helical milling for hole making in Ti6Al4V titanium alloy under sustainable dry condition 12

Sneharika Akula, Sadvidya N. Nayak, Gururaj Bolar and Vishwanath Managuli

Published online: 20 April 2021

DOI: https://doi.org/10.1051/mfreview/2021010

• Abstract
• Full HTML
• PDF (8.686 MB)
• ePUB (5.748 MB)
• References

Open Access

Simulation of dynamic recrystallization of a magnesium alloy with a cellular automaton method coupled with adaptive activation energy and matrix deformation topology 11

Sibing Wang, Wenchen Xu, He Wu, Ranxu Yuan, Xueze Jin and Debin Shan

Published online: 14 April 2021

DOI: https://doi.org/10.1051/mfreview/2021009

• Abstract
• Full HTML
• PDF (3.225 MB)
• ePUB (3.939 MB)
• References

Open Access

Influence of aluminium content on the microstructure and densification of spark plasma sintered nickel aluminium bronze 9

Avwerosuoghene Moses Okoro, Senzeni Sipho Lephuthing, Samuel Ranti Oke and Peter Apata Olubambi

Published online: 30 March 2021

DOI: https://doi.org/10.1051/mfreview/2021006

• Abstract
• Full HTML
• PDF (2.893 MB)
• ePUB (1.891 MB)
• References

Open Access

Planning of efficient trajectories in robotized assembly of aerostructures exploiting kinematic redundancy 8

Federica Storiale, Enrico Ferrentino and Pasquale Chiacchio

Published online: 26 March 2021

DOI: https://doi.org/10.1051/mfreview/2021007

• Abstract
• Full HTML
• PDF (1.674 MB)
• ePUB (2.833 MB)
• References

Open Access

Optimisation of micro W-bending process parameters using I-optimal design-based response surface methodology 7

Xiaoyu Liu, Xiao Han, Shiping Zhao, Yi Qin, Wan-Adlan Wan-Nawang and Tianen Yang

Published online: 02 March 2021

DOI: https://doi.org/10.1051/mfreview/2021005

• Abstract
• Full HTML
• PDF (1.265 MB)
• ePUB (2.517 MB)
• References

Open Access

Hot compression behaviour and microstructural evolution in aluminium based composites: an assessment of the role of reinforcements and deformation parameters 6

Saheed Adeoye Babalola, Kenneth Kanayo Alaneme, Samuel Ranti Oke, Lesley Heath Chown, Nthabiseng Beauty Maledi and Michael Oluwatosin Bodunrin

Published online: 24 February 2021

DOI: https://doi.org/10.1051/mfreview/2021004

• Abstract
• Full HTML
• PDF (12.20 MB)
• ePUB (12.25 MB)
• References

Open Access

Validation and optimization of cutting parameters for Ti-6Al-4V turning operation using DEFORM 3D simulations and Taguchi method 5

Japheth Oirere Obiko, Fredrick Madaraka Mwema and Michael Oluwatosin Bodunrin

Published online: 17 February 2021

DOI: https://doi.org/10.1051/mfreview/2021001

• Abstract
• Full HTML
• PDF (3.847 MB)
• ePUB (2.533 MB)
• References

Open Access

Review

Micro milling process modeling: a review 3

Ali Mamedov

Published online: 10 February 2021

DOI: https://doi.org/10.1051/mfreview/2021003

• Abstract
• Full HTML
• PDF (5.151 MB)
• ePUB (5.565 MB)
• References

Open Access

Experimental analysis of process parameters in drilling nimonic C263 alloy under nano fluid mixed MQL environment 2

Chakaravarthy Ezilarasan, Meenaskshi Sundaram Nagaraj, A. John Presin Kumar, A. Velayudham and Rishab Betala

Published online: 08 January 2021

DOI: https://doi.org/10.1051/mfreview/2020039

• Abstract
• Full HTML
• PDF (12.68 MB)
• ePUB (9.502 MB)
• References

Open Access

Review

A review on differential scanning calorimetry as a tool for thermal assessment of nanostructured coatings 1

Anca Elena Slobozeanu, Simona Elena Bejan, Ioan Albert Tudor, Ana-Maria Mocioiu, Adrian Mihail Motoc, Maria Dolores Romero-Sanchez, Mihai Botan, Cristea George Catalin, Cursaru Laura Madalina, Radu Robert Piticescu and Cristian Predescu

Published online: 08 January 2021

DOI: https://doi.org/10.1051/mfreview/2020038

• Abstract
• Full HTML
• PDF (2.236 MB)
• ePUB (3.001 MB)
• References