Manufacturing Rev.
Volume 8, 2021
Special Issue - The emerging materials and processing technologies
Article Number 10
Number of page(s) 11
Published online 09 April 2021
  1. A.J.J. Koch, P. Hokkeling, M.G.v.d. Steeg, K.J. de Vos, New material for permanent magnets on a base of Mn and Al, J. Appl. Phys. 31 (1960) S75–S77 [Google Scholar]
  2. J. Cui, M. Kramer, L. Zhou, F. Liu, A. Gabay, G. Hadjipanayis, B. Balasubramanian, D. Sellmyer, Current progress and future challenges inrare-earth-free permanent magnets, Acta Mater. 158 (2018) 118–137 [Google Scholar]
  3. K. Patel, J. Zhang, S. Ren, Rare-earth-free high energy product manganesebased magnetic materials, Nanoscale 10 (2018) 11701–11718 [Google Scholar]
  4. K.P. Skokov, O. Gutfleisch, Heavy rare earth free, free rare earth and rare earth free magnets − Vision and reality, Scr. Mater. 154 (2018) 289–294 [Google Scholar]
  5. A.E. Berkowitz, J.D. Livingston, J.L. Walter, Properties of Mn-Al-C magnets prepared by spark erosion and other rapid solidification techniques, J. Appl. Phys. 55 (1984) 2106–2108 [Google Scholar]
  6. A. Chaturvedi, R. Yaqub, I. Baker, Microstructure and magnetic properties of bulk nanocrystalline MnAl, Metals 4 (2014) 20–27 [Google Scholar]
  7. H. Jian, K.P. Skokov, O. Gutfleisch, Microstructure and magnetic properties of Mn-Al-C alloy powders prepared by ball milling, J. Alloys Compd. 622 (2015) 524–528 [Google Scholar]
  8. F. Bittner, J. Freudenberger, L. Schultz, T.G. Woodcock, The impact ofdislocations on coercivity in L10-MnAl, J. Alloys Compd. 704 (2017) 528–536 [Google Scholar]
  9. J. Thielsch, F. Bittner, T.G. Woodcock, Magnetization reversal processes in hot-extruded τ-MnAl-C, J. Magn. Magn. Mater. 426 (2017) 25–31 [Google Scholar]
  10. S. Bance, F. Bittner, T.G. Woodcock, L. Schultz, T. Schrefl, Role of twin and anti-phase defects in MnAl permanent magnets, Acta Mater. 131 (2017) 48–56 [Google Scholar]
  11. F. Bittner, L. Schultz, T.G. Woodcock, The role of the interface distribution in the decomposition of metastable L10-Mn54Al46 , J. Alloys Compd. 727 (2017) 1095–1099 [Google Scholar]
  12. R. Madugundo, G.C. Hadjipanayis, Anisotropic Mn-Al-(C) hot-deformed bulk magnets, J. Appl. Phys. 119 (2016) 013904 [Google Scholar]
  13. A.M.G. Unalan, Development of rare-earth free permanent magnets, Ph.D. thesis, Graduate School of Natural and Applied Sciences of Middle East Technical University (2017). [Google Scholar]
  14. V. Popov, A. Koptyug, I. Radulov, F. Maccari, G. Muller, Prospects of additive manufacturing of rare-earth and non-rare-earth permanent magnets, Procedia Manuf. 21 (2018) 100–108 [Google Scholar]
  15. I.A. Radulov, V.V. Popov, A. Koptyug, F. Maccari, A. Kovalevsky, S. Essel, J. Gassmann, K.P. Skokov, M. Bamberger, Production of net-shape Mn-Al permanent magnets by electron beam melting, Addit. Manuf. 30 (2019) 100787 [Google Scholar]
  16. E.M. Palmero, J. Rial, J. de Vicente, J. Camarero, B. Skårman, H. Vidarsson, P.O. Larsson, A. Bollero, Development of permanent magnet MnAlCpolymer composites and flexible filament for bonding and 3D-printing technologies, Sci. Technol. Adv. Mater. 19 (2018) 465–473 [Google Scholar]
  17. Z.W. Liu, C. Chen, Z.G. Zheng, B.H. Tan, R.V. Ramanujan, Phasetransitions and hard magnetic properties for rapidly solidified MnAl alloysdoped with C, B, and rare earth elements, J. Mater. Sci. 47 (2011) 2333–2338 [Google Scholar]
  18. J.M.D. Coey, Permanent magnets: plugging the gap, Scr. Mater. 67 (2012) 524–529 [Google Scholar]
  19. R. Madugundo, O. Koylu-Alkan, G.C. Hadjipanayis, Bulk Mn-Al-C permanent magnets prepared by various techniques, AIP Adv. 6 (2016) 056009 [Google Scholar]
  20. R.W. McCallum, L. Lewis, R. Skomski, M.J. Kramer, I.E. Anderson, Practical aspects of modern and future permanent mgnets, Ann. Rev. Mater. Res. 44 (2014) 451–477 [Google Scholar]
  21. F. Bittner, L. Schultz, T.G. Woodcock, Twin-like defects in L10 ordered τ-MnAl-C studied by EBSD, Acta Mater. 101 (2015) 48–54 [Google Scholar]
  22. S. Zhao, Y. Wu, Z. Jiao, Y. Jia, Y. Xu, J. Wang, T. Zhang, C. Jiang, Evolution of intrinsic magnetic properties in L10 Mn-Al alloys doped with substitutional atoms and correlated mechanism: experimental and theoretical studies, Phys. Rev. Appl. 11 (2019) 64008 [Google Scholar]
  23. V. Øygarden, J. Rial, A. Bollero, S. Deledda, Phase-pure τ-MnAlC produced by mechanical alloying and a one-step annealing route, J. Alloys Compd. 779 (2019) 776–783 [Google Scholar]
  24. D. Palanisamy, D. Raabe, B. Gault, Elemental segregation to twin boundaries in a MnAl ferromagnetic Heusler alloy, Scr. Mater. 155 (2018) 144–148 [Google Scholar]
  25. J.M.K. Wiezorek, A.K. Kulovitz, C. Yanar, W.A. Soffa, Grain boundary mediated displacive-diffusional formation of τ-phase MnAl, Metall. Mater. Trans. A 42 (2011) 594–604 [Google Scholar]
  26. P.-Z. Si, H.-D. Qian, C.-J. Choi, J. Park, S. Han, H.-L. Ge, K.P. Shinde, In situ observation of phase transformation in MnAl(C) magnetic materials, Materials 10 (2017) 1016 [Google Scholar]
  27. H. Zijlstra, H.B. Haanstra, Evidence by lorentz microscopy for magnetically active stacking faults in MnAl alloy, J. Appl. Phys. 37 (1966) 2853–2856 [Google Scholar]
  28. C. Yanar, J.M.K. Wiezorek, W.A. Soffa, V. Radmilovic, Massive transformation and the formation of the ferromagnetic L10 phase in manganesealuminum-based alloys, Metall. Mater. Trans. A 33 (2002) 2413–2423 [Google Scholar]
  29. J. Landuyt, G. Tendeloo, J.J. Broek, H. Donkersloot, H. Zijlstra, Defect structure and magnetic properties of MnAl permanent magnet materials, IEEE Trans. Magn. 14 (1978) 679–681 [Google Scholar]
  30. P.Z. Si, J.T. Lim, J. Park, H.H. Lee, H. Ge, H. Lee, S. Han, H.S. Kim, C.J. Choi, High coercivity in MnAl disc prepared by severe plastic deformation, Phys. Status Solidi (b) 257 (2019) 1900356 [Google Scholar]
  31. Y. Jia, Y. Wu, S. Zhao, S. Zuo, K.P. Skokov, O. Gutfleisch, C. Jiang, H. Xu, L10 rare-earth-free permanent magnets: the effects of twinning versus dislocations in Mn-Al magnets, Phys. Rev. Mater. 4 (2020) 94402 [Google Scholar]
  32. P. Zhao, L. Feng, K. Nielsch, T.G. Woodcock, Microstructural defects in hot deformed and as-transformed τ-MnAl-C, J. Alloys Compd. 852 (2021) 156998 [Google Scholar]
  33. X.H. Tan, H. Xu, Q. Bai, W.J. Zhao, Y.D. Dong, Magnetic properties of Fe-Co-Nd-Y-B magnet prepared by suction casting, J. Non Cryst. Solids 353 (2007) 410–412 [Google Scholar]
  34. Z. Yuyong, P. Jing, J. Xiaoli, L. Xincai, D. Youren, X. Xiaoyan, Microstructure evolution and magnetic properties of the Nd9Fe81−xTi4C2Nb4Bx (x = 11, 13, 15) bulk magnets prepared by copper mold suction casting, J. Rare Earths 33 (2015) 1081–1086 [Google Scholar]
  35. F. Maccari, L. Schafer, I. Radulov, L.V.B. Diop, S. Ener, E. Bruder, K. Skokov, O. Gutfleisch, Rapid solidification of Nd1+xFe11Ti compounds: phase formation and magnetic properties, Acta Mater. 180 (2019) 15–23 [Google Scholar]
  36. T. Ohtani, N. Kato, S. Kojima, K. Kojima, Y. Sakamoto, I. Konno, M. Tsukahara, T. Kubo, Magnetic properties of Mn-Al-C permanent magnet alloys, IEEE Trans. Magn. 13 (1977) 1328–1330 [Google Scholar]
  37. L. Feng, J. Freudenberger, T. Mix, K. Nielsch, T.G. Woodcock, Rareearth-free MnAl-C-Ni permanent magnets produced by extrusion of powder milled from bulk, Acta Mater. 199 (2020) 155–168 [Google Scholar]
  38. N. Singh, V. Mudgil, K. Anand, A.K. Srivastava, R.K. Kotnala, A. Dhar, Influence of processing on structure property correlations in τ-MnAl rareearth free permanent magnet material, J. Alloys Compd. 633 (2015) 401–407 [Google Scholar]
  39. J.Y. Law, J. Rial, M. Villanueva, N. Lopez, J. Camarero, L.G. Marshall, J.S. Blazquez, J.M. Borrego, V. Franco, A. Conde, L.H. Lewis, A. Bollero, Study of phases evolution in high-coercive MnAl powders obtained through short milling time of gas-atomized particles, J. Alloys Compd. 712 (2017) 373–378 [Google Scholar]
  40. Y. Jia, Y. Wu, S. Zhao, J. Wang, C. Jiang, Relation between solidification microstructure and coercivity in MnAl permanent-magnet alloys, Intermetallics 96 (2018) 41–48 [Google Scholar]
  41. M.V. Gorshenkov, D.Y. Karpenkov, R.V. Sundeev, V.V. Cheverikin, I.V. Shchetinin, Magnetic properties of Mn-Al alloy after HPT deformation, Mater. Lett. 272 (2020) 127864 [Google Scholar]
  42. A. Zhilyaev, T. Langdon, Using high-pressure torsion for metal processing: fundamentals and applications, Prog. Mater. Sci. 53 (2008) 893–979 [CrossRef] [Google Scholar]
  43. A.G. Popov, V.S. Gaviko, V.V. Popov, O.A. Golovnia, A.V. Protasov, E.G. Gerasimov, A.V. Ogurtsov, M.K. Sharin, R. Gopalan, Structure andmagnetic properties of heat-resistant Sm(Co0.796−xFe0.177CuxZr0.027)6.63 permanent magnets with high coercivity, JOM 71 (2018) 559–566 [Google Scholar]
  44. P. Saravanan, V.T.P. Vinod, M. Černík, A. Selvapriya, D. Chakravarty, S.V. Kamat, Processing of Mn-Al nanostructured magnets by spark plasma sintering and subsequent rapid thermal annealing, J. Magn. Magn. Mater. 374 (2015) 427–432 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.