Open Access
Review
Issue
Manufacturing Rev.
Volume 8, 2021
Article Number 31
Number of page(s) 37
DOI https://doi.org/10.1051/mfreview/2021029
Published online 13 December 2021
  1. M. Singh, B.K. Prasad, D.P. Mondal, A.K. Jha, Dry sliding wear behaviour of an aluminium alloy-granite particle composite, Tribol. Int. 34 (2001) 557–567 [CrossRef] [Google Scholar]
  2. S. Das, Y.L. Saraswathi, D.P. Mondal, Erosive-corrosive wear of aluminium alloy composites: influence of slurry composition and speed, Wear 261 (2006) 180–190 [CrossRef] [Google Scholar]
  3. G.H. Wu, Z.Y. Dou, L.T. Jiang, J.H. Cao, Damping properties of aluminium matrix-flyash composites, Mater. Lett. 60 (2006) 2945–2948 [CrossRef] [Google Scholar]
  4. H. Rana, V. Badheka, Elucidation of the role of rotation speed and stirring direction on AA7075-B4C surface composites formulated by friction stir processing, Proc. Inst. Mech. Eng. L 233 (2019) 977–994 [Google Scholar]
  5. R. Deaquino-Lara, I. Estrada-Guel, G. Hinojosa-Ruiz, R. Flores-Campos, J.M. Herrera-Ramírez, R. Martínez-Sánchez, Synthesis of aluminium alloy 7075-graphite composites by milling processes and hot extrusion, J. Alloys Comp. 509 (2011) S284–S289 [CrossRef] [Google Scholar]
  6. R. Deaquino-Lara, N. Soltani, A. Bahrami, E. Gutiérrez-Castañeda, E. García-Sánchez, M.A. Hernandez-Rodríguez, Tribological characterization of Al7075–graphite composites fabricated by mechanical alloying and hot extrusion, Mater. Des. 67 (2015) 224–231 [CrossRef] [Google Scholar]
  7. S. Lal, S. Kumar, Z.A. Khan, A.N. Siddiquee, Wire electrical discharge machining of AA7075/SiC/Al2O3 hybrid composite fabricated by inert gas-assisted electromagnetic stir-casting process, J. Braz. Soc. Mech. Sci. Eng. 36 (2014) 335–346 [CrossRef] [Google Scholar]
  8. C. Wu, P. Fang, G. Luo, F. Chen, Q. Shen, L. Zhang, E.J. Lavernia, Effect of plasma activated sintering parameters on microstructure and mechanical properties of Al-7075/B4C composites, J. Alloys Comp. 615 (2014) 276–282 [CrossRef] [Google Scholar]
  9. Q. Shen, C. Wu, F. Luo, P. Fang, C. Li, Y. Wang, L. Zhang. Microstructure and mechanical properties of Al-7075/B4C composites fabricated by plasma activated sintering, J. Alloys Comp. 588 (2014) 265–270 [CrossRef] [Google Scholar]
  10. M. Bahrami, M.F. Nikoo, M.K.B. Givi, Microstructural and mechanical behaviors of nano-SiC-reinforced AA7075-O FSW joints prepared through two passes, Mater. Sci. Eng. A 626 (2015) 220–228 [CrossRef] [Google Scholar]
  11. M.M. Sharma, C.W. Ziemian, T.J. Eden, Fatigue behavior of SiC particulate reinforced spray-formed 7xxx series Al-alloys, Mater. Des. 32 (2011) 4304–4309 [CrossRef] [Google Scholar]
  12. S. Bera, S.G. Chowdhury, Y. Estrin, I. Manna, Mechanical properties of Al7075 alloy with nano-ceramic oxide dispersion synthesized by mechanical milling and consolidated by equal channel angular pressing, J. Alloys Comp. 548 (2013) 257–265 [CrossRef] [Google Scholar]
  13. C. Wu, K. Ma, J. Wu, P. Fang, G. Luo, F. Chen, Q. Shen, L. Zhang, J.M. Schoenung, E.J. Lavernia, Influence of particle size and spatial distribution of B4C reinforcement on the microstructure and mechanical behavior of precipitation strengthened Al alloy matrix composites, Mater. Sci. Eng. A 675 (2016) 421–430 [CrossRef] [Google Scholar]
  14. G.V. Kumar, C.S. Rao, N. Selvaraj, Mechanical and dry sliding wear behavior of Al7075 alloy-reinforced with SiC particles, J. Compos. Mater. 46 (2012) 1201–1209 [CrossRef] [Google Scholar]
  15. Y.C. Lin, Y.Q. Jiang, X.M. Chen, D.X. Wen, H.M. Zhou, Effect of creep-aging on precipitates of 7075 aluminium alloy, Mater. Sci. Eng. A 588 (2013) 347–356 [CrossRef] [Google Scholar]
  16. A.A. Sarhan, E. Zalnezhad, M. Hamdi, The influence of higher surface hardness on fretting fatigue life of hard anodized aerospace Al7075-T6 alloy, Mater. Sci. Eng. A 560 (2013) 377–387 [CrossRef] [Google Scholar]
  17. R.K. Bhushan, S. Kumar, S. Das, Fabrication and characterization of 7075 Al alloy reinforced with SiC particulates, Int. J. Adv. Manufactur. Technol. 65 (2013) 611–624 [CrossRef] [Google Scholar]
  18. Y. Bai, Y. Guo, J. Li, Z. Yang, J. Tian, Effect of Al2O3 nanoparticle reinforcement on the mechanical and high-temperature tribological behavior of Al-7075 alloy, Proc. Inst. Mech. Eng. J 231 (2017) 900–909 [CrossRef] [Google Scholar]
  19. X.L. Zou, Y.A. Hong, X.H. Chen, Evolution of second phases and mechanical properties of 7075 Al alloy processed by solution heat treatment, Trans. Nonferrous Metals Soc. China 27 (2017) 2146–2155 [CrossRef] [Google Scholar]
  20. J. Peng, X. Jin, Z. Xu, J. Zhang, Z. Cai, Z. Luo, M. Zhu, Study on the damage evolution of torsional fretting fatigue in a 7075 aluminium alloy, Wear 402 (2018) 160–168 [CrossRef] [Google Scholar]
  21. C. Kannan, R. Ramanujam, Effectiveness evaluation of molten salt processing and ultrasonic cavitation techniques during the production of aluminium based hybrid nanocomposites-an experimental investigation, J. Alloys Comp. 751 (2018) 183–193 [CrossRef] [Google Scholar]
  22. T.W. Lu, W.P. Chen, P. Wang, M.D. Mao, Y.X. Liu, Z.Q. Fu, Enhanced mechanical properties and thermo-physical properties of 7075Al hybrid composites reinforced by the mixture of Cr particles and SiCp , J. Alloys Comp. 735 (2018) 1137–1144 [CrossRef] [Google Scholar]
  23. R.M. Tekiyeh, M. Najafi, S. Shahraki, Machinability of AA7075-T6/carbon nanotube surface composite fabricated by friction stir processing, Proc. Inst. Mech. Eng. E 233 (2019) 839–848 [CrossRef] [Google Scholar]
  24. S. Sivasankaran, K.R. Ramkumar, F.A. Al-Mufadi, O.M. Irfan, Effect of TiB2/Gr hybrid reinforcements in Al 7075 matrix on sliding wear behavior analyzed by response surface methodology, Metals Mater. Int. (2019) 1–7 [Google Scholar]
  25. S. Liu, Y. Wang, T. Muthuramalingam, G. Anbuchezhiyan, Effect of B4C and MoS22 reinforcement on micro structure and wear properties of aluminium hybrid composite for automotive applications, Compos. Part B: Eng. 176 (2019) 107329 [CrossRef] [Google Scholar]
  26. M.K. Sahu, R.K. Sahu, Synthesis, microstructure and hardness of Al 7075/B4C/Fly-ash composite using stir casting method, Mater. Today: Proc. 27 (2020) 2401–2406 [CrossRef] [Google Scholar]
  27. K.R. Ramkumar, S. Sivasankaran, F.A. Al-Mufadi, S. Siddharth, R. Raghu, Investigations on microstructure, mechanical, and tribological behaviour of AA7075-x wt.% TiC composites for aerospace applications, Arch. Civil Mech. Eng. 19 (2019) 428–438 [CrossRef] [Google Scholar]
  28. T.R. Prabhu, M. Murugan, B.P. Chiranth, R.K. Mishra, N. Rajini, P. Marimuthu, P.D. Babu, G. Suganya, Effects of dual-phase reinforcement particles (Flyash+ Al2O3) on the wear and tensile properties of the AA7075 Al alloy based composites, J. Inst. Eng. (India): Ser. D 100 (2019) 29–35 [CrossRef] [Google Scholar]
  29. S. Suresh, G.H. Gowd, M.D. Kumar, Experimental investigation on mechanical properties of Al 7075/Al2O3/Mg NMMCs by stir casting method, Sādhanā. 44 (2019) 51 [Google Scholar]
  30. S. Suresh, G.H. Gowd, M.D. Kumar, Mechanical and wear behavior of Al 7075/Al2O3/SiC/mg metal matrix nanocomposite by liquid state process, Adv. Compos. Hybrid Mater. 2 (2019) 530–539 [CrossRef] [Google Scholar]
  31. S. Devaganesh, P.D. Kumar, N. Venkatesh, R. Balaji, Study on the mechanical and tribological performances of hybrid SiC-Al7075 metal matrix composites, J. Mater. Res. Technol. (2020) [Google Scholar]
  32. S. Suresh, D. Sudhakara, B. Vinod, Investigation on mechanical, wear, and machining characteristics of Al7075/MWCNTs using the liquid state method, Adv. Compos. Hybrid Mater. (2020) 243–254 [Google Scholar]
  33. R. Manikandan, T.V. Arjunan, Studies on micro structural characteristics, mechanical and tribological behaviours of boron carbide and cow dung ash reinforced aluminium (Al7075) hybrid metal matrix composite, Compos. Part B: Eng. 183 (2020) 107668 [CrossRef] [Google Scholar]
  34. F. Ficici, Evaluation of surface roughness in drilling particle-reinforced composites, Adv. Compos. Lett. 29 (2020) 2633366×20937711 [Google Scholar]
  35. D.R. Smart, J.P. Kumar, C. Periasamy, Microstructural, mechanical and wear characteristics of AA7075/TaC/Si3N4/Ti based hybrid metal matrix composite material, Mater. Today: Proc. (2020) [Google Scholar]
  36. K. Hemalatha, R. Ashwin, M. Santhanam, M.M. Riyaz, G.G. Sozhamannan, V.S. Venkatachalapthy. Experimental study on behaviour of SiC and Graphene on Al7075 hybrid metal matrix composite, Mater. Today: Proc. (2020) [Google Scholar]
  37. S. Rajakumar, C. Muralidharan, V. Balasubramanian, Optimization of the friction-stir-welding process and tool parameters to attain a maximum tensile strength of AA7075-T6 aluminium alloy, Proc. Inst. Mech. Eng. B 224 (2010) 1175–1191 [CrossRef] [Google Scholar]
  38. M.K. Manoj, V. Gadpale, Synthesis, characterization and dry sliding wear behaviour of Al 7075-MoS2i2 composites prepared by stir casting technique, Trans. Indian Inst. Metals 72 (2019) 3153–3169 [CrossRef] [Google Scholar]
  39. Loganathan P, Gnanavelbabu A, Rajkumar K, Influence of ZrB2/hBN particles on the wear behaviour of AA7075 composites fabricated through stir followed by squeeze cast technique, Proc. Inst. Mech. Eng. J (2020) 1350650120929501 [Google Scholar]
  40. K. Suganeswaran, R. Parameshwaran, T. Mohanraj, N. Radhika, Influence of secondary phase particles Al2O3/SiC on the microstructure and tribological characteristics of AA7075-based surface hybrid composites tailored using friction stir processing, Proc. Inst. Mech. Eng. C (2020) 0954406220932939 [Google Scholar]
  41. J.M. Mistry, P.P. Gohil, An overview of diversified reinforcement on aluminium metal matrix composites: tribological aspects, Proc. Inst. Mech. Eng. J. 231 (2017) 399–421 [CrossRef] [Google Scholar]
  42. N. Ramadoss, K. Pazhanivel, G. Anbuchezhiyan, Synthesis of B4C and BN reinforced Al7075 hybrid composites using stir casting method, J. Mater. Res. Technol. (2020) [Google Scholar]
  43. M. Yildirim, D. Özyürek, M. Gürü, The effects of precipitate size on the hardness and wear behaviors of aged 7075 aluminium alloys produced by powder metallurgy route, Arab. J. Sci. Eng. 41 (2016) 4273–4281 [CrossRef] [Google Scholar]
  44. J. Peng, X. Jin, Z. Xu, J. Zhang, Z. Cai, Z. Luo, M. Zhu, Study on the damage evolution of torsional fretting fatigue in a 7075 aluminium alloy, Wear 402 (2018) 160–168 [CrossRef] [Google Scholar]
  45. Y. Li, D. Retraint, H. Xue, T. Gao, Z. Sun, Fatigue properties and cracking mechanisms of 7075 aluminium alloy under axial and torsional loadings, Proc. Struct. Integr. 19 (2019) 637–644 [Google Scholar]
  46. N. Verma, S.C. Vettivel, Characterization and experimental analysis of boron carbide and rice husk ash reinforced AA7075 aluminium alloy hybrid composite, J. Alloys Comp. 741 (2018) 981–998 [CrossRef] [Google Scholar]
  47. A. Mazahery, M.O. Shabani, Nano-sized silicon carbide reinforced commercial casting aluminium alloy matrix: experimental and novel modelling evaluation, Powder Technol. 217 (2012) 558–565 [CrossRef] [Google Scholar]
  48. M. Singh, O.P. Modi, D. Rupa, A.K. Jha, High stress abrasive wear behaviour of aluminium alloy-granite particle composite, Wear 233–235 (1999) 455–461 [CrossRef] [Google Scholar]
  49. H. Lu, X. Wang, T. Zhang, Z. Cheng, Q. Fang, Design, fabrication, and properties of high damping metal matrix composites − a review, Materials 3 (2009) 958–977 [CrossRef] [Google Scholar]
  50. B. Karthikeyan, S. Ramanathan, V. Ramakrishnan, A calorimetric study of 7075 Al/SiCp composites, Mater. Des. 31 (2010) S92–S95 [CrossRef] [Google Scholar]
  51. B. Karthikeyan, S. Ramanathan, V. Ramakrishnan, Thermo physical property measurement of metal-matrix composites, Mater. Des. (2010) S82–S86 [CrossRef] [Google Scholar]
  52. A. Ahmed, A.J. Neely, K. Shankar, P. Nolan, S. Moricca, T. Eddowes, Synthesis, tensile testing, and microstructural characterization of nanometric SiC particulate-reinforced Al 7075 matrix composites, Metall. Mater. Trans. A 41 (2010) 1582–1591 [CrossRef] [Google Scholar]
  53. R.K. Bhushan, S. Kumar, S. Das, Effect of machining parameters on surface roughness and tool wear for 7075 Al alloy SiC composite, Int. J. Adv. Manufactur. Technol. 50 (2010) 459–469 [CrossRef] [Google Scholar]
  54. S.Z. Chavoshi, Tool flank wear prediction in CNC turning of 7075 Al alloy SiC composite, Product. Eng. 5 (2011) 37–47 [CrossRef] [Google Scholar]
  55. S. Kumar, V. Balasubramanian, Effect of reinforcement size and volume fraction on the abrasive wear behaviour of AA7075 Al/SiCp P/M composites—a statistical analysis, Tribol. Int. 43 (2010) 414–422 [CrossRef] [Google Scholar]
  56. M. Bahrami, M.K. Givi, K. Dehghani, N. Parvin, On the role of pin geometry in microstructure and mechanical properties of AA7075/SiC nano-composite fabricated by friction stir welding technique, Mater. Des. 53 (2014) 519–527 [CrossRef] [Google Scholar]
  57. M. Bahrami, N. Helmi, K. Dehghani, M.K. Givi, Exploring the effects of SiC reinforcement incorporation on mechanical properties of friction stir welded 7075 aluminium alloy: fatigue life, impact energy, tensile strength, Mater. Sci. Eng. A 595 (2014) 173–178 [CrossRef] [Google Scholar]
  58. J. Jiang, Y. Wang, Microstructure and mechanical properties of the semisolid slurries and rheoformed component of nano-sized SiC/7075 aluminium matrix composite prepared by ultrasonic-assisted semisolid stirring, Mater. Sci. Eng. A 639 (2015) 350–358 [CrossRef] [Google Scholar]
  59. H.D. Wu, H. Zhang, C.H. Shuang, D.F. Fu, Flow stress behavior and processing map of extruded 7075Al/SiC particle reinforced composite prepared by spray deposition during hot compression, Trans. Nonferrous Metals Soc. China 25 (2015) 692–698 [CrossRef] [Google Scholar]
  60. A. Nieto, H. Yang, L. Jiang, J.M. Schoenung, Reinforcement size effects on the abrasive wear of boron carbide reinforced aluminium composites, Wear 390 (2017) 228–235 [CrossRef] [Google Scholar]
  61. T.R. Prabhu, Processing and properties evaluation of functionally continuous graded 7075 Al alloy/SiC composites, Arch. Civil Mech. Eng. (2017) 20–31 [CrossRef] [Google Scholar]
  62. D. Bandhu, A. Thakur, R. Purohit, R.K. Verma, K. Abhishek, Characterization & evaluation of Al7075 MMCs reinforced with ceramic particulates and influence of age hardening on their tensile behavior, J. Mech. Sci. Technol. 32 (2018) 3123–3128 [CrossRef] [Google Scholar]
  63. S. Suresh, G.H. Gowd, M.D. Kumar, Wear behaviour of Al 7075/SiC/Mg metal matrix nano composite by liquid state process, Adv. Compos. Hybrid Mater. 1 (2018) 819–825 [CrossRef] [Google Scholar]
  64. S. Suresh, G.H. Gowd, M.D. Kumar, Tribological behavior of Al 7075/SiC metal matrix nano-composite by stir casting method, J. Inst. Eng. (India): Ser. D 100 (2019) 97–103 [CrossRef] [Google Scholar]
  65. N.M. Ramezani, B. Davoodi, M. Aberoumand, M.R. Hajideh, Assessment of tool wear and mechanical properties of Al 7075 nanocomposite in friction stir processing (FSP), J. Braz. Soc. Mech. Sci. Eng. 41 (2019) 182 [CrossRef] [Google Scholar]
  66. S. Suresh, D. Sudhakara, Investigations on wire electric discharge machining and mechanical behavior of Al 7075/nano-SiC composites, J. Inst. Eng. (India): Ser. D 100 (2019) 217–227 [CrossRef] [Google Scholar]
  67. K.K. Singh, S. Singh, A.K. Shrivastava, Comparison of wear and friction behavior of aluminium matrix alloy (Al 7075) and silicon carbide based aluminium metal matrix composite under dry condition at different sliding distance, Mater. Today: Proc. 4 (2017) 8960–8970 [CrossRef] [Google Scholar]
  68. R. AM, M. Kaleemulla, S. Doddamani, B. KN, Material characterization of SiC and Al2O3–reinforced hybrid aluminium metal matrix composites on wear behavior, Adv. Compos. Lett. 28 (2019) 0963693519856356 [Google Scholar]
  69. Y. Liu, W. Chen, C. Yang, D. Zhu, Y. Li, Effects of metallic Ti particles on the aging behavior and the influenced mechanical properties of squeeze-cast (SiCp+ Ti)/7075Al hybrid composites, Mater. Sci. Eng. A 620 (2015) 190–197 [CrossRef] [Google Scholar]
  70. U.R. Kanth, P.S. Rao, M.G. Krishna, Mechanical behaviour of flyash/SiC particles reinforced Al-Zn alloy-based metal matrix composites fabricated by stir casting method, J. Mater. Res. Technol. 8 (2019) 737–744 [CrossRef] [Google Scholar]
  71. M.C. Jo, J.H. Choi, J. Yoo, D. Lee, S. Shin, I. Jo, S.K. Lee, S. Lee, Novel dynamic compressive and ballistic properties in 7075-T6 Al-matrix hybrid composite reinforced with SiC and B4C particulates, Compos. Part B: Eng. 174 (2019) 107041 [CrossRef] [Google Scholar]
  72. V.B. Nathan, R. Soundararajan, C.B. Abraham, Evaluation of mechanical and metallurgical properties on aluminium hybrid metal matrix composites, Mater. Today: Proc. 18 (2019) 2520–2529 [CrossRef] [Google Scholar]
  73. S. Devaganesh, P.D. Kumar, N. Venkatesh, R. Balaji, Study on the mechanical and tribological performances of hybrid SiC-Al7075 metal matrix composites, J. Mater. Res. Technol. (2020) [Google Scholar]
  74. A. Bhowmik, D. Dey, A. Biswas, Comparative study of microstructure, physical and mechanical characterization of SiC/TiB2 reinforced aluminium matrix composite, Silicon (2020) 1–8 [Google Scholar]
  75. R. Flores-Campos, D.C. Mendoza-Ruiz, P. Amézaga-Madrid, I. Estrada-Guel, M. Miki-Yoshida, J.M. Herrera-Ramírez, R. Martínez-Sánchez, Microstructural and mechanical characterization in 7075 aluminium alloy reinforced by silver nanoparticles dispersion, J. Alloys Comp. 495 (2010) 394–398 [CrossRef] [Google Scholar]
  76. H.B. Zhang, B. Wang, Y.T. Zhang, Y. Li, J.L. He, Y.F. Zhang, Influence of aging treatment on the microstructure and mechanical properties of CNTs/7075 Al composites, J. Alloys Comp. 814 (2020) 152357 [Google Scholar]
  77. R. Deaquino-Lara, N. Soltani, A. Bahrami, E. Gutiérrez-Castañeda, E. García-Sánchez, M.A. Hernandez-Rodríguez, Tribological characterization of Al7075–graphite composites fabricated by mechanical alloying and hot extrusion, Mater. Des. 67 (2015) 224–231 [CrossRef] [Google Scholar]
  78. M.V. Gorshenkov, S.D. Kaloshkin, V.V. Tcherdyntsev, V.D. Danilov, V.N. Gulbin. Dry sliding friction of Al-based composites reinforced with various boron-containing particles, J. Alloys Comp. 536 (2012) S126–A129 [CrossRef] [Google Scholar]
  79. I.B. Deshmanya, G.K. Purohit, Development of models for predicting impact strength of Al7075/Al2O3 composites produced by stir-casting, J. Compos. Mater. 46 (2012) 3247–3253 [CrossRef] [Google Scholar]
  80. S. Sabbaghianrad, T.G. Langdon, Developing superplasticity in an aluminium matrix composite processed by high-pressure torsion, Mater. Sci. Eng. A 655 (2016) 36–43 [CrossRef] [Google Scholar]
  81. P.X. Zhang, H. Yan, W. Liu, X.L. Zou, B.B. Tang, Effect of T6 heat treatment on microstructure and hardness of nanosized Al2O3 reinforced 7075 aluminium matrix composites, Metals 9 (2019) 44 [CrossRef] [Google Scholar]
  82. R. Muraliraja, R. Arunachalam, I. Al-Fori, M. Al-Maharbi, S. Piya, Development of alumina reinforced aluminium metal matrix composite with enhanced compressive strength through squeeze casting process, Proc. Inst. Mech. Eng. L 233 (2019) 307–314 [Google Scholar]
  83. A. Baradeswaran, A.E. Perumal, Study on mechanical and wear properties of Al 7075/Al2O3/graphite hybrid composites, Compos. Part B: Eng. 56 (2014) 464–471 [CrossRef] [Google Scholar]
  84. S. Rakshath, B. Suresha, R.S. Kumar, I. Saravanan, Dry sliding and abrasive wear behaviour of Al-7075 reinforced with alumina and boron nitride particulates, Mater. Today: Proc. 22 (2020) 619–626 [CrossRef] [Google Scholar]
  85. A. Javdani, A.H. Daei-Sorkhabi, Microstructural and mechanical behavior of blended powder semisolid formed Al7075/B4C composites under different experimental conditions, Trans. Nonferrous Metals Soc. China 28 (2018) 1298–310 [CrossRef] [Google Scholar]
  86. C. Wu, R. Shi, G. Luo, J. Zhang, Q. Shen, Z. Gan, J. Liu, L. Zhang, Influence of particulate B4C with high weight fraction on microstructure and mechanical behavior of an Al-based metal matrix composite, J. Alloys Comp. 789 (2019) 825–833 [CrossRef] [Google Scholar]
  87. B. Subramaniam, B. Natarajan, B. Kaliyaperumal, S.J. Chelladurai, Investigation on mechanical properties of aluminium 7075-boron carbide-coconut shell flyash reinforced hybrid metal matrix composites, China Foundry 15 (2018) 449–456 [CrossRef] [Google Scholar]
  88. T.P. Reddy, S.J. Kishore, P.C. Theja, P.P. Rao, Development and wear behavior investigation on aluminum-7075/B4C/flyash metal matrix composites, Adv. Compos. Hybrid Mater. (2020) 1–1 [Google Scholar]
  89. V.V. Kumar, K. Raja, V.C. Sekar, T. Ramkumar, Thrust force evaluation and microstructure characterization of hybrid composites (Al7075/B4C/BN) processed by conventional casting technique, J. Braz. Soc. Mech. Sci. Eng. 41 (2019) 228 [CrossRef] [Google Scholar]
  90. S.E. Hernández-Martinez, J.J. Cruz-Rivera, C.G. Garay-Reyes, R. Martínez-Sánchez, I. Estrada-Guel, J.L. Hernández-Rivera, Comparative study of synthesis of AA7075-ZrO2 metal matrix composite by different mills, J. Alloys Comp. 643 (2015) S107–S113 [CrossRef] [Google Scholar]
  91. D. Verdera, P. Rey, F. García, R. Saldaña, manufacturing a surface composite material made of nanoceramic particles of TiC and aluminium alloy 7075 by means of friction stir processing, InFriction Stir Welding and Processing VIII (2015) 199–206 [CrossRef] [Google Scholar]
  92. S. Kumar, A. Kumar, C. Vanitha, Corrosion behaviour of Al 7075/TiC composites processed through friction stir processing, Mater. Today: Proc. 15 (2019) 21–29 [CrossRef] [Google Scholar]
  93. J.T. Wang, L. Xie, Z.G. Wang, H. Gu, K.Y. Luo, Y.L. Lu, M.T. He, M.Z. Ge, Influence of laser shock peening on the coefficient of thermal expansion of Al (7075)-based hybrid composites, J. Alloys Comp. 844 (2020) 156088 [CrossRef] [Google Scholar]
  94. K.S. Sasikumar, K.P. Arulshri, K. Ponappa, M. Uthayakumar, A study on kerf characteristics of hybrid aluminium 7075 metal matrix composites machined using abrasive water jet machining technology, Proc. Inst. Mech. Eng. B 232 (2018) 690–704 [CrossRef] [Google Scholar]
  95. A. Dhulipalla, B.U. Kumar, V. Akhil, J. Zhang, Z. Lu, H.Y. Park, T.G. Jung, J. Zhang, Synthesis and machining characteristics of novel TiC ceramic and MoS22 soft particulate reinforced aluminium alloy 7075 matrix composites, Manufactur. Lett. (2020) [Google Scholar]
  96. B. Yang, G. Gan, L. Yang, M. Sun, H. Zhang, Z.Z. Fang, Microstructural characterization and wear behavior of in situ TiC/7075 composites synthesized by displacement reactions and spray forming, Mater. Sci. Eng. A 528 (2011) 549–555 [Google Scholar]
  97. H. Wang, H. Zhang, Z. Cui, Z. Chen, D. Chen, H. Wang, Investigation on the high-temperature ductility and fracture mechanisms of an in-situ particle reinforced Al matrix composite 7075Al/TiB2 , Mater. Sci. Eng. A 764 (2019) 138263 [CrossRef] [Google Scholar]
  98. S. Pan, T. Saso, N. Yu, M Sokoluk, G. Yao, N. Umehara, X. Li, New study on tribological performance of AA7075-TiB2 nanocomposites, Tribol. Int. 152 (2020) 106565 [CrossRef] [Google Scholar]
  99. S. Zhao, H. Zhang, Z. Cui, D. Chen, Z. Chen, Particle dispersion and grain refinement of in-situ TiB2 particle reinforced 7075 Al composite processed by elliptical cross-section torsion extrusion, J. Alloys Comp. (2020) 155136 [CrossRef] [Google Scholar]
  100. M.I. Haq, A. Anand, Microhardness studies on stir cast AA7075-Si3N4 based composites, Mater. Today: Proc. 5 (2018) 19916–19922 [CrossRef] [Google Scholar]
  101. J.M. Mistry, P.P. Gohil, Experimental investigations on wear and friction behaviour of Si3N4p reinforced heat-treated aluminium matrix composites produced using electromagnetic stir casting process, Compos. Part B: Eng. 161 (2019) 190–204 [CrossRef] [Google Scholar]
  102. S.A. Kumar, J.H. Vignesh, S.P. Joshua, Investigating the effect of porosity on aluminium 7075 alloy reinforced with silicon nitride (Si3N4) metal matrix composites through stir casting process, Mater. Today: Proc. (2020) [Google Scholar]
  103. Y. Bai, M. Liu, J. Li, Y. Guo, Tribofilm formation on the VN/7075 composite surface under sulfur-containing boundary lubrication, Proc. Inst. Mech. Eng. J. (2020) 1350650120930165 [Google Scholar]
  104. H.B. Zhang, B. Wang, Y.T. Zhang, Y. Li, J. He, Y.F. Zhang, Influence of aging treatment on the microstructure and mechanical properties of CNTs/7075 Al composites, J. Alloys Comp. 814 (2020) 152357 [CrossRef] [Google Scholar]
  105. H. Lee, J.H. Choi, M.C. Jo, D. Lee, S. Shin, I. Jo, S.K. Lee, S. Lee, Effects of SiC particulate size on dynamic compressive properties in 7075-T6 Al-SiCp composites, Mater. Sci. Eng. A 738 (2018) 412–419 [CrossRef] [Google Scholar]
  106. R. Liu, C. Wu, J. Zhang, G. Luo, Q. Shen, L. Zhang, Microstructure and mechanical behaviors of the ultrafine grained AA7075/B4C composites synthesized via one-step consolidation, J. Alloys Comp. 748 (2018) 737–744 [CrossRef] [Google Scholar]
  107. U.R. Kanth, P.S. Rao, M.G. Krishna, Mechanical behaviour of flyash/SiC particles reinforced Al-Zn alloy-based metal matrix composites fabricated by stir casting method, J. Mater. Res. Technol. 8 (2019) 737–744 [CrossRef] [Google Scholar]
  108. N. Gangil, S. Maheshwari, A.N. Siddiquee, N.Z. Khan, X. Chen, S. Konovalov, Microstructural characterization and tribological behaviour of surface composites fabricated on AA7050-T7451 alloy via friction stir processing, Proc. Inst. Mech. Eng. J 19 (2020) 1350650120950867 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.