Open Access
Manufacturing Rev.
Volume 8, 2021
Article Number 30
Number of page(s) 11
Published online 06 December 2021
  1. J.M. Rodríguez, J.M. Carbonell, P. Jonsén, Numerical methods for the modelling of chip formation, Arch. Computat. Methods Eng. 27 (2020) 387–412 [CrossRef] [Google Scholar]
  2. G. Singh, B. Kalita, K.I. Vishnu Narayanan, U.K. Arora, M.M. Mahapatra, R. Jayaganthan, Finite element analysis and experimental evaluation of residual stress of Zr-4 alloys processed through swaging, Metals 10 (2020) 1281 [CrossRef] [Google Scholar]
  3. M. Swasthik Pradhana, S. Singha, C. Prakasha, G. Krolczykb, A. Pramanikc, C. Iulian Pruncu, Investigation of machining characteristics of hard-to-machine Ti-6Al-4V-ELI alloy for biomedical applications, J. Mater. Res. Technol. 8 (2019) 4849–4862 [CrossRef] [Google Scholar]
  4. B. Satyanarayana, M. Dileep Reddy, P. Ruthvik Nitin, Optimization of controllable turning parameters for high speed dry machining of super alloy: FEA and experimentation, Mater. Today: Proc. 4 (2017) 2203–2212 [CrossRef] [Google Scholar]
  5. U. Maheshwera Reddy Paturi, S. Methuku, S.S. Siripragada, Y. Sangishetty, R. Kumar Gunda, Finite element simulations of machinability parameters in turning of Inconel 718, Mater. Today: Proc. 38 (2021) 2658–2663 [CrossRef] [Google Scholar]
  6. M. Sandeep Kumar, R. Reddy, V. Vasu, A 3-D simulation and experimental study of cutting forces in turning Inconel-718, Mater. Today: Proc. 4 (2017) 9942–9945 [CrossRef] [Google Scholar]
  7. X. Ren, Z. Liu, A simulation model for predicting surface integrity coupled thermal-mechanical effect in turning of Inconel 718 super alloy, Int. J. Adv. Manuf. Technol. 100 (2019) 1825–1837 [CrossRef] [Google Scholar]
  8. V. Bushlya, F. Lenrick, A. Bjerke, H. Aboulfadl, M. Thuvander, J.-E. Stahla, R.M. Saoubi, Tool wear mechanisms of PcBN in machining Inconel 718: analysis across multiple length scale, CIRP Ann. Manufactur. Technol. 70 (2021) 73–78 [CrossRef] [Google Scholar]
  9. W. Fan, W. Ji, L. Wang, L. Zheng, Y. Wang, A review on cutting tool technology in machining of Ni-based super alloys, Int. J. Adv. Manuf. Technol. 110 (2020) 2863–2879 [CrossRef] [Google Scholar]
  10. L. Li, M. Wu, X. Liu, Y. Cheng, Y. Yu, Experimental study of the wear behavior of PCBN inserts during cutting of GH4169 super alloys under high-pressure cooling, Int. J. Adv. Manuf. Technol. 95 (2018) 1941–1951 [CrossRef] [Google Scholar]
  11. C. Ezilarasan, V.S. Senthil Kumar, A. Velayudham, Theoretical predictions and experimental validations on machining the Nimonic C-263 super alloy, Simul. Model. Practice Theory 40 (2014) 192–207 [CrossRef] [Google Scholar]
  12. A. Yildiz Abdullahkurt, S. Yagmur, Finite element simulation of drilling operation and theoretical analysis of drill stresses with the deform-3D, Simul. Model. Practice Theory 104 (2020) 1–17 [Google Scholar]
  13. J. Oirere Obiko, F. Madaraka Mwema, M. Oluwatosin Bodunrin, Validation and optimization of cutting parameters for Ti-6Al-4V turning operation using DEFORM 3D simulations and Taguchi method, Manufacturing Rev. 8, (2021) 1–13 [CrossRef] [EDP Sciences] [Google Scholar]
  14. Y. Liu, J. Li, Z.M. Zhang, X.H. Huand, W.J. Zhang, Experimental comparison of five friction models on thesame test-bed of the micro stick-slip motion system, Mech. Sci. 6 (2015) 15–28 [CrossRef] [Google Scholar]
  15. A. Kumar Parida, Simulation and experimental investigation of drilling of Ti-6Al-4V alloy, Int. J. Lightweight Mater. Manufact. 1 (2018) 197–205 [Google Scholar]
  16. R.K. Bhushan, Multi-response optimization of parameters during turning of AA7075/SiC composite for minimum surface roughness and maximum tool life, Silicon (2020). https:/ [Google Scholar]
  17. M. Erdi Korkmaz, N. Yasar, M. Gunay, Numerical and experimental investigation of cutting forces in turning of Nimonic 80A super alloy, Eng. Sci. Technol. 23 (2020) 664–673 [Google Scholar]
  18. C. Yao, Z. Zhou, J. Zhang, D. Wu, L. Tan, Experimental study on cutting force of, face-turning Inconel718 with ceramic tools and carbide tools, Adv. Mech. Eng. 9 (2017) 1–9 [Google Scholar]
  19. W. Zebala, G. Struzikiewiczand, K. Rumian, Cutting forces and tool wear investigation during turning of sintered nickel-cobalt alloy with CBN tools, Materials (2021) [Google Scholar]
  20. E. Kaya, B. Akyüz, Effects of cutting parameters on machinability characteristics of Ni-based superalloys: a review, Open Eng. 7 (2017) 330–342 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.