Open Access
Manufacturing Rev.
Volume 8, 2021
Article Number 22
Number of page(s) 7
Published online 19 July 2021
  1. S.O. Akinwamide, Study of microstructural and mechanical properties of stir cast Al (SiC-Mg-TiFe) composite, Fluid Dyn. Mater. Process. 15 (2019) 15–26 [CrossRef] [Google Scholar]
  2. B. Bobić, S. Mitrović, M. Babić, I. Bobić, Corrosion of metal-matrix composites with aluminium alloy substrate, Tribol. Ind. 32 (2010) 3–11 [Google Scholar]
  3. I.A. Kartsonakis, E.P. Koumoulos, C.A. Charitidis, Advancement in corrosion resistance of AA 2024-T3 through sol-gel coatings including nanocontainers, Manufactur. Rev. 4 (2017) 2 [CrossRef] [Google Scholar]
  4. S.O. Akinwamide, S.M. Lemika, B.A. Obadele, O.J. Akinribide, B.T. Abe, P.A. Olubambi, Characterization and mechanical response of novel Al-(Mg-TiFe-SiC) metal matrix composites developed by stir casting technique, J. Compos. Mater. (2019) 0021998319851198 [Google Scholar]
  5. K. Shirvanimoghaddam, H. Khayyam, H. Abdizadeh, M.K. Akbari, A. Pakseresht, F. Abdi, A. Abbasi, M. Naebe, Effect of B4C, TiB2 and ZrSiO4 ceramic particles on mechanical properties of aluminium matrix composites: experimental investigation and predictive modelling, Ceramics Int. 42 (2016) 6206–6220 [CrossRef] [Google Scholar]
  6. R. Rosliza, Improvement of corrosion resistance of aluminium alloy by natural products, InTech, 2012 [Google Scholar]
  7. S.E. Vannan, S.P. Vizhian, Microstructure and mechanical properties of as cast aluminium alloy 7075/basalt dispersed metal matrix composites, J. Miner. Mater. Character. Eng. 2 (2014) 182 [Google Scholar]
  8. B. Subramaniam, B. Natarajan, B. Kaliyaperumal, S.J.S. Chelladurai, Investigation on mechanical properties of aluminium 7075-boron carbide-coconut shell fly ash reinforced hybrid metal matrix composites, China Foundry 15 (2018) 449–456 [CrossRef] [Google Scholar]
  9. A.V. Muley, S. Aravindan, I. Singh, Nano and hybrid aluminum based metal matrix composites: an overview, Manufactur. Rev. 2 (2015) 15 [CrossRef] [EDP Sciences] [Google Scholar]
  10. C. Shearwood, Y.Q. Fu, L. Yu, K.A. Khor, Spark plasma sintering of TiNi nano-powder, Scr. Mater. 52 (2005) 455–460 [CrossRef] [Google Scholar]
  11. S.O. Akinwamide, N. Tshabalala, O.E. Falodun, S.R. Oke, O.J. Akinribide, B.T. Abe, P.A. Olubambi, Microstructural and corrosion resistance study of sintered Al-tin in sodium chloride solution, Mater. Today: Proc. 18 (2019) 2881–2886 [CrossRef] [Google Scholar]
  12. N. Saheb, Z. Iqbal, A. Khalil, A.S. Hakeem, N. Al Aqeeli, T. Laoui, A. Al-Qutub, R. Kirchner, Spark plasma sintering of metals and metal matrix nanocomposites: a review, J. Nanomater. 2012 (2012) 18 [CrossRef] [Google Scholar]
  13. H. Zakaria, Microstructural and corrosion behavior of Al/SiC metal matrix composites, Ain Shams Eng. J. 5 (2014) 831–838 [CrossRef] [Google Scholar]
  14. S.O. Akinwamide, S.M. Lemika, F. Adams, O.J. Akinribide, B.T. Abe, P.A. Olubambi, An investigation on the corrosion behavior of Al (Mg-TiFe-SiC) matrix composite in acidic and chloride media, Mater. Today: Proc. 18 (2019) 3827–3834 [CrossRef] [Google Scholar]
  15. A. Gokce, F. Findik, Mechanical and physical properties of sintered aluminum powders, J. Achiev. Mater. Manufactur. Eng. 30 (2008) 157–164 [Google Scholar]
  16. S.O. Akinwamide, M. Lesufi, O.J. Akinribide, P. Mpolo, P.A. Olubambi, Evaluation of microstructural and nanomechanical performance of spark plasma sintered TiFe-SiC reinforced aluminium matrix composites, J. Mater. Res. Technol. 9 (2020) 12137–12148 [CrossRef] [Google Scholar]
  17. O.R. Pérez, J. García-Hinojosa, F.R. Gómez, S. Mejia-Sintillo, V. Salinas-Bravo, R. Lopes-Sesenez, J. Gonzalez-Rodriguez, C.A. Garcia-Pérez, Corrosion behavior of A356/SiC alloy matrix composites in 3.5% NaCl solution, Int. J. Electrochem. Sci. 14 (2019) 7423–7436 [Google Scholar]
  18. R. Gundersen, K. Nisancioglu, Cathodic protection of aluminum in seawater, Corrosion 46 (1990) 279–285 [CrossRef] [Google Scholar]
  19. P. Natishan, W. O'grady, Chloride ion interactions with oxide-covered aluminum leading to pitting corrosion: a review, J. Electrochem. Soc. 161 (2014) C421 [CrossRef] [Google Scholar]
  20. P. Marcus, V. Maurice, H.-H. Strehblow, Localized corrosion (pitting): a model of passivity breakdown including the role of the oxide layer nanostructure, Corros. Sci. 50 (2008) 2698–2704 [CrossRef] [Google Scholar]
  21. G. Frankel, N. Sridhar, Understanding localized corrosion, Mater. Today 11 (2008) 38–44 [CrossRef] [Google Scholar]
  22. I. Gurrappa, V.B. Prasad, Corrosion characteristics of aluminium based metal matrix composites, Mater. Sci. Technol. 22 (2006) 115–122 [CrossRef] [Google Scholar]
  23. S. Payan, Y. Le Petitcorps, J.-M. Olive, H. Saadaoui, Experimental procedure to analyse the corrosion mechanisms at the carbon/aluminium interface in composite materials, Compos. A: Appl. Sci. Manufactur. 32 (2001) 585–589 [CrossRef] [Google Scholar]
  24. S.O. Akinwamide, O.J. Akinribide, P.A. Olubambi, Influence of ferrotitanium and silicon carbide addition on structural modification, nanohardness and corrosion behaviour of stir-cast aluminium matrix composites, Silicon (2020) 1–12 [Google Scholar]
  25. M.S.B. Selamat, Corrosion behavior of SiC p/6061 Al metal matrix composites in chloride solutions, Adv. Perform. Mater. 3 (1996) 183–204 [CrossRef] [Google Scholar]
  26. S.O. Akinwamide, O.J. Akinribide, P.A. Olubambi, Microstructural evolution, mechanical and nanoindentation studies of stir cast binary and ternary aluminium based composites, J. Alloys Comp. (2020) 156586 [Google Scholar]
  27. G.M. Pinto, J. Nayak, A.N. Shetty, Corrosion behaviour of 6061 Al-15vol. Pct. SiC composite and its base alloy in a mixture of 1: 1 Hydrochloric and sulphuric acid medium, Int. J. Electrochem. Sci. 4 (2009) 1452–1468 [Google Scholar]
  28. G.P. Kumar, R. Keshavamurthy, P. Kumari, C. Dubey, Corrosion behaviour of TiB2 reinforced aluminium based in situ metal matrix composites, Persp. Sci. 8 (2016) 172–175 [Google Scholar]
  29. M.M. Boopathi, K. Arulshri, N. Iyandurai, Evaluation of mechanical properties of aluminium alloy 2024 reinforced with silicon carbide and fly ash hybrid metal matrix composites, Am. J. Appl. Sci. 10 (2013) 219 [CrossRef] [Google Scholar]
  30. A. Pardo, M. Merino, S. Merino, F. Viejo, M. Carboneras, R. Arrabal, Influence of reinforcement proportion and matrix composition on pitting corrosion behaviour of cast aluminium matrix composites (A3xx. x/SiCp), Corros. Sci. 47 (2005) 1750–1764 [CrossRef] [Google Scholar]
  31. Z. Ahmad, P. Paulette, B.A. Aleem, Mechanism of localized corrosion of aluminum-silicon carbide composites in a chloride containing environment, J. Mater. Sci. 35 (2000) 2573–2579 [CrossRef] [Google Scholar]
  32. K. Ralston, N. Birbilis, Effect of grain size on corrosion: a review, Corrosion 66 (2010) 075005-075005–075013 [CrossRef] [Google Scholar]
  33. M. Orłowska, E. Ura-Bińczyk, L. Olejnik, M. Lewandowska, The effect of grain size and grain boundary misorientation on the corrosion resistance of commercially pure aluminium, Corros. Sci. 148 (2019) 57–70 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.