Open Access
Manufacturing Rev.
Volume 9, 2022
Article Number 10
Number of page(s) 14
Published online 22 April 2022
  1. C. Sponaugle, Pittsburgh Engineer, Quarterly publication of the Engineers' Society of Western Pennsylvania Winter (2005) pp. 7–9. [Google Scholar]
  2. M.S. Hasan, M.A. Mazid, R.E. Clegg, The basics of stellites in machining perspective, Int. J. Eng. Mater. Manufact. 1 (2016) 35–50 [Google Scholar]
  3. W. Betteridge, Cobalt and Its Alloys (Halted Press, Chichester, 1982) [Google Scholar]
  4. L. Fouilland, M. El Mansori, M. Gerland, Role of welding process energy on the microstructural variation in a cobalt-based superalloy hardfacing, Surface Coat. Technol. 201 (2007) 6445–6451 [CrossRef] [Google Scholar]
  5. Z. Barsoum, A. Lundback, Simplified FE welding simulation of fillet welds − 3D effects on the formation of residual stresses, Eng. Fail. Anal. 16 (2009) 2281–2289 [CrossRef] [Google Scholar]
  6. Z. Xueping, G. Erwei, C.R. Liu, Optimisation of process parameter of residual stresses for hard turned surfaces, J. Mater. Process. Technol. 209 (2009) 4286–4291 [CrossRef] [Google Scholar]
  7. R. Kaul, P. Ganesh, M.K. Tiwari, A.K. Singh, P. Tripathi, A. Gupta, A.K. Nath, Laser assisted deposition of graded overlay of Stellite 6 on austenitic stainless steel, Laser Eng. 12 (2002) 207–225 [CrossRef] [Google Scholar]
  8. C.T. Sims, Cobalt-Base Alloys, the Superalloys (John Wiley and Sons), 145 [Google Scholar]
  9. M.X. Yao, J.B.C. Wu, W. Xu, R. Liu, Metallographic study and wear resistance of a high-C wrought Co-based alloy Stellite 706K, Mater. Sci. Eng. A 407 (2005) 291–298 [CrossRef] [Google Scholar]
  10. Z. Ruml, F.A. Straka, New model for steam turbine blade materials erosion, Wear 186-187 (1995) 421–424; 14. C. Zhao, F. Tian, H.R. Peng, & Hou, J.Y. (2002). Non-transferred arc plasma cladding of stellite Ni60 alloy on steel. Surface and Coatings Technology, 155(1), 80-84. [CrossRef] [Google Scholar]
  11. M.S. Hasan, A.M. Mazid, R.E. Clegg, Optimisation of the machining of stellite 6 PTA hardfacing using surface roughness, Key Eng. Mater. 443 (2010) 227–231 [CrossRef] [Google Scholar]
  12. M.S. Hasan, A.M. Mazid, R.E. Clegg, Effect of cutting tool nose radius on surface roughness for Stellite 6 machining using coated carbide insert, in Proc. of the 6th Australian Congress on Applied Mechanics (ACAM 6 2010), Perth, Australia (2010) 603–612 [Google Scholar]
  13. M.S. Hasan, A.M. Mazid, R.E. Clegg, A. McLeod, Residual stress analysis on machined surface in turning Stellite 6, in Proc. of the 6th Australian Congress on Applied Mechanics (ACAM 6 2010), Perth, Australia (2010) pp. 714–722 [Google Scholar]
  14. M.S. Hasan, Optimisation of machining processes design for stellite 6, a wear resistant and difficult-tomachine material. Master of Engineering thesis, Central Queensland University, Rockhampton, Australia (2011) p. 136 [Google Scholar]
  15. C.P. Sullivan, M.J. Donachie, Jr, Cobalt -Base Superalloys, Cobalt Information Center, Brussels, Belgium (1979) [Google Scholar]
  16. L. Zixiang, C. Yinan, W. Jie, L. Changmeng, W. Jiachen, X. Tianqiu, Characterization of microstructure and mechanical properties of Stellite 6 part fabricated by wire arc additive manufacturing, MDPI-metals3 223–227 (2019) 2019 [Google Scholar]
  17. A. Marti, Cobalt-base alloys used in bone surgery. Injury 31 (2000) 18–21 [Google Scholar]
  18. Y.S. Wong, M. Rahman, H.S. Lim, H. Han, N. Ravi, Investigation of micro-EDM material removal characteristics using single RC-pulse discharges, J. Mater. Process. Technol. 140 (2003) 303–307 [CrossRef] [Google Scholar]
  19. A.S. D’Oliveira, C.M. Da Silva, Microstructural features of consecutive layers of stellite 6 deposited by laser cladding, Surf. Coat. Technol. 153 (2002) 203–209 [CrossRef] [Google Scholar]
  20. R.S. Pawade, S.S. Joshi, P.K. Brahmankar, Effect of machining parameters and cutting edge geometry on surface integrity of high-speed turned Inconel 718, Int. J. Mach. Tools Manufact. 48 (2008) 15–28 [CrossRef] [Google Scholar]
  21. J.C. Outeiro, J.C. Pina, R. M’Saoubi, F. Pusavec, I.S. Jawahir, Analysis of residual stresses induced by dry turning of difficult-to-machine materials, CIRP Ann. Manufactur. Technol. 57 (2008) 77–80 [CrossRef] [Google Scholar]
  22. M. Salio, T. Berruti, G. De Poli, Prediction of residual stress distribution after turning in turbine disks, Int. J. Mech. Sci. 48 (2006) 976–984 [CrossRef] [Google Scholar]
  23. L. Wang, D. Li, Effects of yttrium on microstructure, mechanical properties and high temperature wear behaviour of cast Stellite 6 alloy, Wear 255 (2003) 535–544 [CrossRef] [Google Scholar]
  24. H. Celik, M. Kaplan, Effects of silicon on the wear behaviour of cobalt-based alloys at elevated temperature, Wear 257 (2004) 606–611 [CrossRef] [Google Scholar]
  25. K. Egashira, A. Matsugasako, H. Tsuchiya and M. Miyazaki, Electrical discharge machining with ultralow discharge energy, J. Precis. Eng. 30 (2006) 414–420 [CrossRef] [Google Scholar]
  26. Y.B. Jia, J.N. Kim, Experimental investigations into near-dry milling EDM of Stellite alloys, Materials Science, Int. J. Mach. Mach. Mater. 7 (2010) 96–111 [Google Scholar]
  27. S. Raviraj, B.V. Augustine, K. Laxmikanth, Empirical study on stress distribution zone during machining of DRACs using finite element analysis, Taguchi's design of experiments and response surface methodology, ARPN J. Eng. Appl. Sci. 14 (2019) 2576–2582 [Google Scholar]
  28. S. Raviraj, P. Raghuvir, R. Srikanth, K. Vasanth, Study on surface roughness minimization in turning of DRACs using surface roughness methodology and Taguchi under pressured steam jet approach, ARPN J. Eng. Appl. Sci. 3 (2008) 59–67 [Google Scholar]
  29. S. Raviraj, P. Raghuvir, S.R. Srikanth, Tribological studies on discontinuously reinforced aluminium composites based on the orthogonal arrays, ARPN J. Eng. Appl. Sci. 3 (2008) 94–92 [Google Scholar]
  30. P.K. Shetty, R. Shetty, D. Shetty, N.F. Rehaman, Machinability study on dry drilling of titanium alloy Ti-6Al-4V using L9 orthogonal array, Proc. Mater. Sci. 5 (2014) 2605–2614 [CrossRef] [Google Scholar]
  31. S. Raviraj, K.J. Tony, D.R. Goutam, S.R. Srikanth, Surface roughness analysis during turning of Ti-6Al-4V under near dry machining using statistical tool, Int. J. Curr. Eng. Technol. 4 (2014) 2061–2067 [Google Scholar]
  32. D.C. Montgomery, Design and Analysis of Experiments, sixth edition, John Wiley & sons, Inc. (2005) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.