Open Access
Issue
Manufacturing Rev.
Volume 9, 2022
Article Number 13
Number of page(s) 10
DOI https://doi.org/10.1051/mfreview/2022010
Published online 27 June 2022
  1. K.M. Vijay, S.A. Man, Micro-EDM multiple parameter optimization for Cp titanium, Int. J. Adv. Manuf. Technol. 89 (2017) 897–904 [CrossRef] [Google Scholar]
  2. N.H. Phan et al., Material removal rate in electric discharge machining with aluminum tool electrode for Ti-6Al-4V titanium alloy, Adv. Eng. Res. Appl. (2021) https://doi.org/10.1007/978-3-030-64719-3_58 [Google Scholar]
  3. M. Chausov, A. Pylypenko, V. Berezin, K. Volyanska, P. Maruschak, V. Hutsaylyuk, L. Markashova, S. Nedoseka, A. Menou, Influence of dynamic non-equilibrium processes on strength and plasticity of materials of transportation systems, Transport 33 (2018) 231–241 [Google Scholar]
  4. N.H. Phan et al., Tool wear rate analysis of uncoated and AlCrNi coated aluminum electrode in EDM for Ti-6Al-4 V titanium alloy, Adv. Eng. Res. Appl. (2021) https://doi.org/10.1007/978-3-030-64719-3_91 [Google Scholar]
  5. M. Durairaj, D. Sudharsun, N. Swamynathan, Analysis of process parameters in wire EDM with stainless steel using single objective taguchi method and multi objective grey relational grade, Proc. Eng. 64 (2013) 868–877 [CrossRef] [Google Scholar]
  6. N. Pragadish, M.P. Kumar, Optimization of dry EDM process parameters using grey relational analysis, Arab. J. Sci. Eng. 41 (2016) 4383–4390 [CrossRef] [Google Scholar]
  7. M.A. Ilani, M. Khoshnevisan, Mathematical and physical modeling of FE-SEM surface quality surrounded by the plasma channel within Al powder-mixed electrical discharge machining of Ti-6Al-4V. Int. J. Adv. Manuf. Technol. 112 (2021) 3263–3277 [CrossRef] [Google Scholar]
  8. A. Taherkhani, M.A. Ilani, F. Ebrahimi et al., Investigation of surface quality in Cost of Goods Manufactured (COGM) method of μ-Al2O3 powder-mixed-EDM process on machining of Ti-6Al-4V, Int. J. Adv. Manuf. Technol. 116 (2021) 1783–1799 [CrossRef] [Google Scholar]
  9. M.A. Ilani, M. Khoshnevisan, Powder mixed-electrical discharge machining (EDM) with the electrode is made by fused deposition modeling (FDM) at Ti-6Al-4V machining procedure, Multisc. Multidiscip. Model. Exp. Des. 3 (2020) 173–186 [CrossRef] [Google Scholar]
  10. M.A. Ilani, M. Khoshnevisan, Study of surfactant effects on intermolecular forces (IMF) in powder-mixed electrical discharge machining (EDM) of Ti-6Al-4V, Int. J. Adv. Manuf. Technol. 116 (2021) 1763–1782 [CrossRef] [Google Scholar]
  11. N.H. Phan, P.V. Dong, T. Muthuramalingam, N.V. Thien, H.T. Dung, T.Q. Hung, N.V. Duc, N.T. Ly, Experimental investigation of uncoated electrode and PVD AlCrNi coating on surface roughness in electrical discharge machining of Ti-6Al-4V, Int. J. Eng. Trans. A 34 (2021) 928–934 [Google Scholar]
  12. N.H. Phan, P. Van Dong, H.T. Dung et al., Multi-object optimization of EDM by Taguchi-DEAR method using AlCrNi coated electrode, Int. J. Adv. Manuf. Technol. (2021). https://doi.org/10.1007/s00170-021-07032-3 [Google Scholar]
  13. G. Sakthivel, D. Saravanakumar, T. Muthuramalingam, Application of failure mode and effects analysis in manufacturing industry – an integrated approach with FAHP – FUZZY TOPSIS and FAHP-FUZZY VIKOR, Int. J. Product. Qual. Manag. 24 (2018) 398–423 [CrossRef] [Google Scholar]
  14. P. Mandal, S. Chandra Mondal, Surface characteristics of mild steel using EDM with Cu-MWCNT composite electrode [Google Scholar]
  15. R. Jothimurugan, K.S. Amirthagadeswaran, J. Daniel, Performance of silver coated copper tool with kerosene-servotherm dielectric in EDM of Monel 400TM, J. Appl. Sci. 12 (2012) 999–1005 [CrossRef] [Google Scholar]
  16. Y. Liu, W. Wang, W. Zhang, F. Ma, D. Yang, Z. Sha, S. Zhang, Experimental study on electrodewear of diamond-nickel coated electrode in EDM small hole machining, Adv. Mater. Sci. Eng. (2019) ID 7181237, 10 pages [Google Scholar]
  17. D.L. Panchal, S.K. Biradar, V.Y. Gosavi, Analysis of EDM process parameters by using coated electrodes, Int. J. Eng. Trends Technol. 41 (2016) [Google Scholar]
  18. A. Rashid, A. Bilal, C. Liu, M.P. Jahan, D. Talamona, A. Perveen, Effect of conductive coatings on micro-electro-discharge machinability of aluminum nitride ceramic using on-machine-fabricated microelectrodes, Materials 12 (2019) 3316 [CrossRef] [Google Scholar]
  19. T.R. Ablyaz, E.S. Shlykov, S.S. Kremlev, Copper-coated electrodes for electrical discharge machining of 38X2H2MA steel, Russ. Eng. Res. 37 (2017) 910–911 [CrossRef] [Google Scholar]
  20. E. Uhlmann, M. Langmack, R. Garn, D. Oberschmidt, J. Fecher, S.M. Rosiwal, R.F. Singer, Using diamond coated tool-electrodes for drilling micro holes with EDM, in Proceedings of the Euspen International Conference – Como (2011) [Google Scholar]
  21. M. Dastagiri, R.P. Srinivasa, P.M. Valli, TOPSIS, GRA methods for parametric optimization on wire electrical discharge machining (WEDM) process, in Design and Research Conference (AIMTDR–2016) College of Engineering (2016) [Google Scholar]
  22. S. Prabhu, B.K. Vinayagam, Multiresponse optimization of EDM process with nanofluids using TOPSIS method and genetic algorithm, Arch. Mech. Eng. 63 (2016) 45–71 [CrossRef] [Google Scholar]
  23. M. Durairaj, D. Sudharsun, N. Swamynathan, Analysis of process parameters in wire EDM with stainless steel using single objective Taguchi method and multi objective grey relational grade, Proc. Eng. 64 (2013) 868–877 [CrossRef] [Google Scholar]
  24. I. Nayak, J. Rana, A. Parida, Performance optimization in electro- discharge machining using a suitable multiresponse optimization technique, Decis. Sci. Lett. 6 (2017) 283–294 [CrossRef] [Google Scholar]
  25. K.M. Vijay, S.A. Man, S. Suman, S. Narinder, Micro-EDM multiple parameter optimization for Cp Titanium, Int. J. Adv. Manuf. Technol. 89 (2017) 897–904 [CrossRef] [Google Scholar]
  26. M. Himadri, M Kalipada, Optimization of machining condition in WEDM for titanium grade 6 using MOORA coupled with PCA – a multivariate hybrid approach, J. Adv. Manufactur. Syst. 16 (2017) 81–99 [CrossRef] [Google Scholar]
  27. K. Rajesh, K. Anish, P.G. Mohinder, S. Ajit, S. Neeraj, Multiple performance characteristics optimization for Al 7075 on electric discharge drilling by Taguchi grey relational theory, J. Ind. Eng. Int. 11 (2015) 459–472 [CrossRef] [Google Scholar]
  28. K. Pawan, Meenu, K. Vineet, Optimization of process parameters for WEDM of Inconel 825 using grey relational analysis, Decis. Sci. Lett. 7 (2018) 405–416 [Google Scholar]
  29. S. Tripathy, D.K. Tripathy, Multi-attribute optimization of machining process parameters in powder mixed electro-discharge machining using TOPSIS and grey relational analysis, Eng. Sci. Technol. 19 (2016) 62–70 [Google Scholar]
  30. S.P. Sivapirakasama, J. Mathew, M. Surianarayanan, Multi-attribute decision making for green electrical discharge machining, Exp. Syst. Appl. 38 (2011) 8370–8374 [CrossRef] [Google Scholar]
  31. A.P. Tiwary, B.B. Pradhan, B. Bhattacharyya, Application of multi-criteria decision making methods for selection of micro-EDM process parameters, Adv. Manuf. 2 (2014) 251–258 [CrossRef] [Google Scholar]
  32. J. Huo, S. Liu, Y. Wang, T. Muthuramalingam, V. Ngoc Pi, Influence of process factors on surface measures on electrical discharge machined stainless steel using TOPSIS, Mater. Res. Express 6 (2019) 086507 [CrossRef] [Google Scholar]
  33. K.B. Rajesh, C.R. Bharat, Optimization the machining parameters by using VIKOR and entropy weight method during EDM process of Al–18% SiCp metal matrix composite, Decis. Sci. Lett. 5 (2016) 269–282 [Google Scholar]
  34. P.H. Nguyen, T.L. Banh, K.A. Mashood et al., Application of TGRA-based optimisation for machinability of high-chromium tool steel in the EDM process, Arab. J. Sci. Eng. 45 (2020) 5555–5562 [CrossRef] [Google Scholar]
  35. V.S. Gadakh, Parametric optimization of wire electrical discharge machining using topsis method, Adv. Product. Eng. Manag. 7 (2012) 157–164 [CrossRef] [Google Scholar]
  36. R. Manivannan, K.M. Pradeep, Multi-attribute decision-making of cryogenically cooled micro-EDM drilling process parameters using TOPSIS method, J. Mater. Manufactur. Process. 32 (2017) 209–215 [CrossRef] [Google Scholar]
  37. R. Manivannan, M.P. Kumar, Multi-response optimization of Micro-EDM process parameters on AISI304 steel using TOPSIS, J. Mech. Sci. Technol. 30 (2016) 137–144 [CrossRef] [Google Scholar]
  38. D. Petković, M. Madić, M. Radovanović, V. Gečevska, Application of the performance selection index method for solving machining MCDM problems, FactaUniver. Ser.: Mech. Eng. 15 (2017) 97–106 [Google Scholar]
  39. S. Diyaley, P. Shilal, I. Shivakoti, R.K. Ghadai, K. Kalita, PSI and TOPSIS based selection of process parameters in WEDM, Period. Polytech. Mech. Eng. 61 (2017) 255–260 [CrossRef] [Google Scholar]
  40. H.P. Nguyen, T.L. Banh, Q.D. Le et al., Multi-criteria decision making using preferential selection index in titanium based die-sinking PMEDM, J. Korean Soc. Precis. Eng. 36 (2019) 793–802 [CrossRef] [Google Scholar]
  41. P. Nguyen Huu, M. Thangaraj, Multi criteria decision making of vibration assisted EDM process parameters on machining silicon steel using Taguchi-DEAR methodology, Silicon 13 (2021) 1879–1885 [CrossRef] [Google Scholar]
  42. R. Shanmugam, M.O. Ramoni, T. Geethapriyan, M. Thangaraj, Influence of additive manufactured stainless steel tool electrode on machinability of beta titanium alloy, Metals 11 (2021) 778 [CrossRef] [Google Scholar]
  43. B.T. Long, N.H. Phan, N. Cuong et al., Optimization of PMEDM process parameter for maximizing material removal rate by Taguchi’s method, Int. J. Adv. Manuf. Technol. 87 (2016) 1929–1939 [CrossRef] [Google Scholar]
  44. T. Geethapriyan, T. Muthuramalingam, K. Kalaichelvan, Influence of process parameters on machinability of Inconel 718 by electrochemical micromachining process using TOPSIS technique, Arab. J. Sci. Eng. 44 (2019) 7945–7955 [CrossRef] [Google Scholar]
  45. M. Thangaraj, A. Ramamurthy, K. Sridharan, S. Ashwin, Analysis of surface performance measures on WEDM processed titanium alloy with coated electrodes, Mater. Res. Express 5 (2018) 126503 [Google Scholar]
  46. T. Muthuramalingam, B. Mohan, Performance analysis of iso current pulse generator on machining characteristics in EDM process, Arch. Civil Mech. Eng. 14 (2014) 383–390 [CrossRef] [Google Scholar]
  47. T. Muthuramalingam, B. Mohan, A. Rajadurai, M.D. Antony, Experimental investigation of iso energy pulse generator on performance measures in EDM, Mater. Manufactur. Process. 28 (2013) 1137–1142 [CrossRef] [Google Scholar]
  48. S. Shirguppikar, M.S Patil, N.H. Phan, T. Muthuramalingam, P.V. Dong, N.C. Tam, B.T. Tai, N.D. Minh, N.V. Duc, Assessing the effects of uncoated and coated electrode on response variables in electrical discharge machining for Ti-6Al-4V titanium alloy, Tribol. Ind. (2021) DOI: 10.24874/ti.1020.12.20.03 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.