EDP Sciences logo
Submit your paper
Search
Menu
Home All issues Volume 10 (2023) Manufacturing Rev., 10 (2023) 16 References
Open Access
Issue
Manufacturing Rev.
Volume 10, 2023
Article Number 16
Number of page(s) 14
DOI https://doi.org/10.1051/mfreview/2023015
Published online 10 November 2023
  1. N.M. Dawood, A.A.R. Abid, Effect of aging on corrosion behavior of martensite phase in Cu-Al-Ni shape memory alloy, Key. Eng. Mat. 911 (2022) 96–102 [CrossRef] [Google Scholar]
  2. R. Dasgupta, A look into Cu-based shape memory alloys: present scenario and future prospects, J. Mat. Res. 29 (2014) 1681–98 [CrossRef] [Google Scholar]
  3. T. Volkov-Husović, I. Ivanić, S. Kožuh, S. Stevanović, M. Vlahović, S. Martinović et al., Microstructural and cavitation erosion behavior of the CuAlNi shape memory alloy, Metals 11 (2021) 997 [CrossRef] [Google Scholar]
  4. K.K. Alaneme, E.A. Okotete, J.U. Anaele, Structural vibration mitigation–a concise review of the capabilities and applications of Cu and Fe based shape memory alloys in civil structures, J. Build. Eng. 22 (2019) 22–32 [CrossRef] [Google Scholar]
  5. M. Gholami-Kermanshahi, Y.Y. Wu, G. Lange, S.H. Chang, Effect of alloying elements (Nb, Ag) on the damping performance of Cu–Al–Mn shape memory alloys, J. Alloys Compd. 930 (2023) 167438 [CrossRef] [Google Scholar]
  6. E.M. Mazzer, M.R. da Silva, P. Gargarella, Revisiting Cu-based shape memory alloys: recent developments and new perspectives, J. Mat. Res. 37 (2022) 162–182 [CrossRef] [Google Scholar]
  7. M.L. Carvalho, Corrosion of copper alloys in natural seawater: effects of hydrodynamics and pH [PhD dissertation, Université Pierre et Marie, Curie-Paris VI, 2014 [Google Scholar]
  8. P.M. Khanh, V.A. Tuan, L.T. Nhung, N. DuongNam, The influence of thermo-mechanical treatment on phase transformation and shape memory effect of CuAl9Fe4Ni2 alloy, Mat. Res. Exp. 8 (2021) 106527 [CrossRef] [Google Scholar]
  9. S. Ivosevic, R. Rudolf, Materials with shape memory effect for applications in maritime, Scientific J. Pol. Nav. Acad. 218 (2019) 25–41 [CrossRef] [Google Scholar]
  10. Š. Ivošević, N. Kovač, G. Vastag, P. Majerič, R. Rudolf, A probabilistic method for estimating the influence of corrosion on the CuAlNi shape memory alloy in different marine environments, Crystals 11 (2021) 274 [CrossRef] [Google Scholar]
  11. A.R.K.A. Ali, Z.T.K. Al-Tai, The effect of iron addition on the dry sliding wear and corrosion behavior of Cu Al Ni shape memory alloy, J. Eng. Technol. 28 (2010) 6888–6902 [Google Scholar]
  12. S.H. Mohammed, S.H. Shahatha, Shape memory alloys, properties and applications: a review, AIP 2593 (2023) 020008 [Google Scholar]
  13. E. Ercan, Analysis of dry wear, microstructure and thermodynamic parameters of CuAlTa bulk material, Trans. Indian Inst. Met. 74 (2021) 2193–2202 [CrossRef] [Google Scholar]
  14. D. Kumar, S. Angra, S. Singh, Mechanical properties and wear behavior of stir cast aluminum metal matrix composite: a review, Int. J. Eng. 35 (2022) 794–801 [CrossRef] [Google Scholar]
  15. S. Santosh, J. Kevin Thomas, K. Rajkumar, A. Sabareesh, Effect of Ni and Mn additions on the damping characteristics of Cu-Al-Fe based high temperature shape memory alloys, J. Alloys Compds. 924 (2022) 166258 [Google Scholar]
  16. P. Sharma, NiTi shape memory alloy: physical and tribological characterization, J. Mech. Behav. Mater. 27 (2018) 20180009 [Google Scholar]
  17. A.H. Haleem, Z.T. Khulief, I.N. Kadhim, Modification of corrosion and mechanical behavior of Cu-Zn-Al shape memory alloy, J. Phys.: Conf. Ser. IOP Publishing. 1973 (2021) 012049 [CrossRef] [Google Scholar]
  18. S. Prashantha, S.M. Shashidhara, U.S. Mallikarjun, A.G. Shivasiddaramaiah, Evaluation of shape memory effect and wear properties of Cu-Al-Be shape memory alloys, Mater. Today: Proc. 4 (2017) 10123–10127 [CrossRef] [Google Scholar]
  19. E. Moskvichev, N. Shamarin, A. Smolin, Structure and mechanical properties of Cu–Al–Mn alloys fabricated by electron beam additive manufacturing, Mater. 16 (2022) 123 [CrossRef] [Google Scholar]
  20. A. Hashim, A.H. Halem, A.A. Hashim, Investigate the effect of Titanium addition on the microstructure, sliding wear resistance and shape memory effect of Cu-Al-Ni SMA prepared via powder metallurgy, J. Eng. Appl. Sci. 13 (2018) 6910–6914 [Google Scholar]
  21. J. Peña, F.J. Gil, J.M. Guilemany, Load and sliding velocity effect in dry sliding wear behavior of CuZnAl shape memory alloys, Metall. Mater. Trans. A 37 (2006) 1175–1181 [CrossRef] [Google Scholar]
  22. M. Mohan, T.S.V. Krishna, D.V.N.J. Rao, D.S. Rao, Influence of silver addition on wear characteristics of 791 Cu-Al-Mn shape memory alloys, Mater. Today: Proc. In Press, Corrected Proof, Available online 10 March 2023 [Google Scholar]
  23. P. Rajendra, P.K.V. Kumar, K.R. Phaneesh, M. Nagaral, Evaluation of Cu-Al-Be SMA wear behavior using Taguchi approach, Easychair preprint. No. 5175, 2021 [Google Scholar]
  24. A.G. Shivasiddaramiah, U.S. Mallik, C. Krishnakanth, S. Prashanth, Wear behavior of Cu-Al-Be-Mn shape memory alloys by using Taguchi technique, Mater. Today: Proc. 4 (2017) 11168–11174 [CrossRef] [Google Scholar]
  25. M.M. Sadawy, The influence of heat treatment on tribological properties of Cu-Al- Fe-Ni shape memory alloy, EIJEST 29 (2020) 43–50 [Google Scholar]
  26. R. Bender, D. Féron, D. Mills, S. Ritter, R. Bäßler, D. Bettge, M. Zheludkevich, Corrosion challenges towards a sustainable society, Mater. Corros. 73 (2022) 1730–1751 [CrossRef] [Google Scholar]
  27. S. Muira, Shape memory and superelasticity in CuZnSn alloy and its application, Mater. Scripta Forum 394–395 (2002) 399–402 [CrossRef] [Google Scholar]
  28. X. Yu, Z. Xiao, Q. Yu, Z. Li, Q. Lei, J. Dai, Effect of Al on corrosion behavior of imitation-gold Cu-Zn-Ni-Sn alloys in 3.5 wt.% NaCl solution, JOM 73 (2021) 589–599 [CrossRef] [Google Scholar]
  29. M.J. Hutchison, P. Zhou, K. Ogle, J.R. Scully, Enhanced electrochemical Cu release from commercial Cu-Sn alloys: fate of the alloying elements in artificial perspiration, Electrochim. Acta 241 (2017) 73–78 [CrossRef] [Google Scholar]
  30. M. Karthik, J. Abhinav, K.V. Shankar, Morphological and mechanical behavior of Cu–Sn alloys—a review, J. Metals Mat. Int. 27 (2021) 1915–1946 [CrossRef] [Google Scholar]
  31. S. Kaiser, M.S. Kaiser, A comparative study of chemical and physical properties of copper and copper alloys affected by acidic, alkaline and saline environments, J. Electro. Sci. Eng. 10 (2020) 373–384 [Google Scholar]
  32. O. Papadopoulou, P. Vassiliou, The influence of archaeometallurgical copper alloy castings microstructure towards corrosion evolution in various corrosive media, Corr. Mater. Degr. 2 (2021) 227–247 [CrossRef] [Google Scholar]
  33. C.A. Canbay, O. Karaduman, N. Ünlü, S.A. Baiz, İ. Özkul, Heat treatment and quenching media effects on the thermodynamical, thermoelastical and structural characteristics of a new Cu-based quaternary shape memory alloy, Compo. Part B: Eng. 174 (2019) 106940 [CrossRef] [Google Scholar]
  34. S. Sathish, U.S. Mallik, T.N. Raju, Corrosion behavior of Cu-Zn-Ni shape memory alloys, J. Miner. Mater. Charact. Eng. 1 (2013) 49–54 [Google Scholar]
  35. Q. Wang, L. Wang, J. Kang, Q. Wang, C. Cui, R. Su et al., Effects of aging and thermal cycling on the microstructure and damping behaviors of a porous CuAlMn shape memory alloy, J. Mater. Res. Technol. 9 (2020) 7020–7026 [CrossRef] [Google Scholar]
  36. L. Cai, Y. Wang, W. Huang, W. He, H. Peng, Y. Wen, Effect of Ni alloying on vacancy behavior and damping capacity in martensitic ductile Cu-Al-Mn alloys, J. Mater. Res. Tech. 25 (2023) 7109–7118 [CrossRef] [Google Scholar]
  37. Z. Stošić, D. Manasijević, L. Balanović, T. Holjevac-Grgurić, U. Stamenković, M. Premović, R. Todorović, Effects of composition and thermal treatment of Cu-Al-Zn alloys with low content of Al on their shape-memory properties, Mater. Res. 20 (2017) 1425–1431 [CrossRef] [Google Scholar]
  38. Q. Yang, S.L. Wang, J. Chen, T.N. Zhou, H.B. Peng, Y.H. Wen, Strong heating rate-dependent deterioration of shape memory effect in up/step quenched Cu-based alloys: a ductile CuAlMn alloy as an example, Acta Materialia 111 (2016) 348–356 [CrossRef] [Google Scholar]
  39. S.N. Saud, E. Hamzah, T. Abubakar, S. Farahany, Structure-property relationship of Cu-Al-Ni-Fe shape memory alloys in different quenching media, J. Mater. Eng. Perfor. 23 (2013) 255–261 [Google Scholar]
  40. C.-A. Hsu, M.-Y. Tu, Y.-F. Hsu, W.-H. Wang, The precipitation behavior of α1-plate and γ-phase in Cu-Zn-Sn shape memory alloys, Mater. Trans. 47 (2006) 2427–2433 [CrossRef] [Google Scholar]
  41. K.K. Alaneme, E.A. Okotete, N. Maledi, Phase characterization and mechanical behavior of Fe-B modified Cu-Zn-Al shape memory alloys, J. Mater. Res. Technol. 6 (2017) 136–146 [CrossRef] [Google Scholar]
  42. ASTM G99-17 Standard test method for wear testing with a pin-on-disk apparatus, ASTM International, 2017 [Google Scholar]
  43. ASTM E18-20 Rockwell hardness standard test methods, ASTM International, 2020 [Google Scholar]
  44. ASTM G59-97 Standard test method for conducting potentiodynamic polarization resistance measurements, ASTM International, 2020 [Google Scholar]
  45. L. Vrsalović, I. Ivanić, S. Kožuh, B. Kosec, M. Bizjak, J. Kovač, U. Gabor, M. Gojić, Influence of heat treatment on the corrosion properties of CuAlMn shape memory alloys, Corros. Rev. 37 (2019) 579–589 [CrossRef] [Google Scholar]
  46. S. Liu, Y. Zhang, W. Liu, Y. Deng, X. Zhang, Effect of step-quenching on microstructure of aluminum alloy 7055, Trans. Nonferrous Met. Soc. China 20 (2010) 1–6 [CrossRef] [Google Scholar]
  47. K.K. Alaneme, S. Umar, Mechanical behavior and damping properties of Ni modified Cu–Zn–Al shape memory alloys, J. Sci. Adv. Mater. Devices 3 (2018) 371–379 [CrossRef] [Google Scholar]
  48. K.K. Alaneme, J.U. Anaele, E.A. Okotete, Martensite aging phenomena in Cu-based alloys: Effects on structural transformation, mechanical and shape memory properties: A critical review, Sci. Afr. 12 (2021) e00760 [Google Scholar]
  49. K.K. Alaneme, A.V. Fajemisin, N.B. Maledi, Development of aluminium-based composites reinforced with steel and graphite particles: structural, mechanical and wear characterization, J. Mater. Res. Technol. 8 (2019) 670–682 [CrossRef] [Google Scholar]
  50. I.D. Utu, R. Muntean, I. Mitelea, Corrosion and wear properties of Zn-based composite coatings, J. Mat. Eng. Perfor. 29 (2020) 5360–5365 [CrossRef] [Google Scholar]
  51. R.S.A. Adnan, M.K. Abbass, D.M. Jomaa, Effect of tin addition on corrosion resistance and microstructure of Cu-based shape memory alloy, Mater. Today: Proc. 42 (2021) 2119–2124 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.