Volume 10 (2023)

Free Access to the whole issue

Manufacturing Review articles are available online as soon as the production process is complete.
The currently opened issue will be updated regularly until it is complete. To keep abreast of new articles, you may either visit this page regularly or subscribe to our E-mail alert

Manufacturing Review

Volume 10 (2023) (in progress)

Export the citation of the selected articles Export
Select all

Open Access

Analysis and optimization of mass percentage of zycoprint polymer and abrasives in achieving stability of suspension mixture in abrasive water jet machining 9

Preeti Maurya, Vijay G.S. and Raghavendra Kamath C.

Published online: 29 May 2023

DOI: https://doi.org/10.1051/mfreview/2023007

Open Access

Review

Nano-additives and their effects on the microwave absorptions and mechanical properties of the composite materials 8

Yared G. Zena, Mulugeta H. Woldemariam and Ermias G. Koricho

Published online: 28 April 2023

DOI: https://doi.org/10.1051/mfreview/2023004

Open Access

Development of OCMNO algorithm applied to optimize surface quality when ultra-precise machining of SKD 61 coated Ni-P materials 7

Le Anh Duc, Pham Minh Hieu and Nguyen Minh Quang

Published online: 28 April 2023

DOI: https://doi.org/10.1051/mfreview/2023006

Open Access

An experimental method for determining the service life and reliability of the CNC lathe main spindle bearing assembly 6

Van Hung Pham, Tam Pham Minh and Thuy Duong Nguyen

Published online: 26 April 2023

DOI: https://doi.org/10.1051/mfreview/2023005

Open Access

Dual role of trace elements in magnesium dissolved age hardened A356 alloy on microstructure and peak micro hardness 5

Kashimata Nithesh, Rajesh Nayak, Rajarama Hande, Sathyashankara Sharma, Mandya Channegowda Gowri Shankar and Srinivas Doddapaneni

Published online: 07 March 2023

DOI: https://doi.org/10.1051/mfreview/2023003

Open Access

Effect of TiO₂ inoculants on the wear conduct of the aluminium AA 6061/red mud high performance hybrid composite 4

Niranjan Hugar, B. Venkata Narayana, Santhosh Nagaraja and Sunil Waddar

Published online: 23 February 2023

DOI: https://doi.org/10.1051/mfreview/2023002

Open Access

Microstructure, physical, tensile and wear behaviour of B₄C particles reinforced Al7010 alloy composites 3

Kotresha Mydur, Mahendra Kumar S., Madeva Nagaral, Virupaxi Auradi, Bharath V. and Sudarshan T.A.

Published online: 15 February 2023

DOI: https://doi.org/10.1051/mfreview/2023001

Open Access

Review

Topological structures for microchannel heat sink applications – a review 2

Kaijie Lu, Chunju Wang, Changrui Wang, Xueliang Fan, Fei Qi and Haidong He

Published online: 24 January 2023

DOI: https://doi.org/10.1051/mfreview/2022035

Open Access

Review

Nanofluids, micro-lubrications and machining process optimisations − a review 1

Rahul R. Chakule, Sharad S. Chaudhari, Kailas V. Chandratre, Pralhad B. Patole and Poonam S. Talmale

Published online: 10 January 2023

DOI: https://doi.org/10.1051/mfreview/2022034

Manufacturing Review

Volume 10 (2023) (in progress)

Analysis and optimization of mass percentage of zycoprint polymer and abrasives in achieving stability of suspension mixture in abrasive water jet machining 9

Nano-additives and their effects on the microwave absorptions and mechanical properties of the composite materials 8

Development of OCMNO algorithm applied to optimize surface quality when ultra-precise machining of SKD 61 coated Ni-P materials 7

An experimental method for determining the service life and reliability of the CNC lathe main spindle bearing assembly 6

Dual role of trace elements in magnesium dissolved age hardened A356 alloy on microstructure and peak micro hardness 5

Effect of TiO2 inoculants on the wear conduct of the aluminium AA 6061/red mud high performance hybrid composite 4

Microstructure, physical, tensile and wear behaviour of B4C particles reinforced Al7010 alloy composites 3

Topological structures for microchannel heat sink applications – a review 2

Nanofluids, micro-lubrications and machining process optimisations − a review 1

Effect of TiO₂ inoculants on the wear conduct of the aluminium AA 6061/red mud high performance hybrid composite 4

Microstructure, physical, tensile and wear behaviour of B₄C particles reinforced Al7010 alloy composites 3