EDP Sciences logo
Submit your paper
Search
Menu
Home All issues Volume 10 (2023) Manufacturing Rev., 10 (2023) 3 References
Open Access
Issue
Manufacturing Rev.
Volume 10, 2023
Article Number 3
Number of page(s) 11
DOI https://doi.org/10.1051/mfreview/2023001
Published online 15 February 2023
  1. U.B. Krishna, B. Vasudeva, V. Auradi, M. Nagaral, Mechanical characterization and tensile fractography of Al7075-WCP-CoP composite, Frattura e Integrita Strutturale 16 (2022) 283–290 [CrossRef] [Google Scholar]
  2. P. Shantharaj, A.S. Prashanth, M. Nagaral, V. Bharath, V. Auradi, K. Dharshan, Microstructure, tensile and compression behaviour of B4C particles reinforced Al7075 matrix composites, Mater. Today: Proc. 52 (2022) 1135–1139 [CrossRef] [Google Scholar]
  3. V. Bharath, V. Auradi, M. Nagaral, S. Babu Boppana, S. Ramesh, K. Palanikumar, Microstructural and wear behavior of Al2014-alumina composites with varying alumina content, Trans. Indian Inst. Metals 75 (2022) 133–147 [CrossRef] [Google Scholar]
  4. V. Hiremath, V. Bharath, V. Auradi, S.T. Dundur, M. Nagaral, Machining of hard-to-cut materials: impact of varying weight proportion of boron carbide particle addition on cutting force and surface roughness of Al6061, J. Mater. Eng. Perform. 31 (2021) 3784–3791 [Google Scholar]
  5. H.S. Kumar, U.N. Kempaiah, M. Nagaral, V. Auradi, Impact, tensile and fatigue failure analysis of boron carbide particles reinforced Al-Mg-Si (Al6061) alloy composites, J. Failure Anal. Prevent. 21 (2021) 2177–2189 [CrossRef] [Google Scholar]
  6. M. Nagaral, V. Auradi, V. Bharath, Mechanical characterization and fractography of 100 micron sized silicon carbide particles reinforced Al6061 alloy composites, Metall. Mater. Eng. 28 (2021) 17–32 [CrossRef] [Google Scholar]
  7. U.B. Krishna, B. Vasudeva, V. Auradi, M. Nagaral, Effect of percentage variation on wear behaviour of tungsten carbide and cobalt reinforced Al7075 matrix composites synthesized by melt stirring method, J. Bio- Tribo-Corros. 7 (2021) 1–8 [CrossRef] [Google Scholar]
  8. V. Bharath, V. Auradi, M. Nagaral, Fractographic characterization of Al2O3p particulates reinforced Al2014 alloy composites subjected to tensile loading, Frattura ed Integrità Strutturale 15 (2021) 14–23 [CrossRef] [Google Scholar]
  9. S.B. Boppana, S. Dayanand, B. Vedashantha Murthy, M. Nagaral, A. Telagu, V. Kumar, V. Auradi, Development and mechanical characterisation of Al6061-Al2O3-graphene hybrid metal matrix composites, J. Compos. Sci. 5 (2021) 155 [CrossRef] [Google Scholar]
  10. V. Bharath, D.H. Ashita, V. Auradi, M. Nagaral, Influence of variable particle size reinforcement on mechanical and wear properties of alumina reinforced 2014Al alloy particulate composite, FME Trans. 48 (2020) 968–978 [CrossRef] [Google Scholar]
  11. W. Liao, B. Ye, L. Zhang, H. Zhou, W. Guo, Q. Wang, W. Li, Microstructure evolution and mechanical properties of SiC nanoparticles reinforced magnesium matrix composite processed by cyclic closed die forging, Mater. Sci. Eng. A 642 (2015) 49–56 [CrossRef] [Google Scholar]
  12. C.S. Ramesh, R. Keshavamurthy, B.H. Channabasappa, A. Ahmed, Microstructure and mechanical properties of Ni-P coated Si3N4 reinforced Al6061 composites, Mater. Sci. Eng. A 502 (2009) 99–106 [CrossRef] [Google Scholar]
  13. J. Harti, T.B. Prasad, M. Nagaral, K. Niranjan Rao, Hardness and tensile behavior of Al2219-TiC metal matrix composites, J. Mech. Eng. Autom. 6 (2016) 8–12 [Google Scholar]
  14. M. Nagaral, R.G. Deshapande, V. Auradi, S.B. Boppana, S. Dayanand, M.R. Anilkumar, Mechanical and wear characterization of ceramic boron carbide-reinforced Al2024 alloy metal composites, J. Bio- Tribo-Corros. 7 (2021) 1–12 [CrossRef] [Google Scholar]
  15. T.H. Manjunatha, Y. Basavaraj, M. Nagaral, V. Venkataramana, Investigations on mechanical behavior of Al7075-nano B4C composites, IOP Conf. Ser.: Mater. Sci. Eng. 376 (2018) 012091 [CrossRef] [Google Scholar]
  16. G.B. Veeresh Kumar, G.V. Chowdary, M. Surya Vamsi, K. Jayarami Reddy, M. Nagaral, K. Naresh, Effects of addition of titanium diboride and graphite particulate reinforcements on physical, mechanical and tribological properties of Al6061 alloy based hybrid metal matrix composites, Adv. Mater. Process. Technolog. 8 (2021) 1–18 [Google Scholar]
  17. H.S. Kumar, U.N. Kempaiah, M. Nagaral, V. Auradi, Impact, tensile and fatigue failure analysis of boron carbide particles reinforced Al-Mg-Si (Al6061) alloy composites, J. Fail. Anal. Prevent. 21 (2021) 2177–2189 [CrossRef] [Google Scholar]
  18. B.R. Mithun, M. Nagaral, V. Auradi, V. Bharath, Microstructure and mechanical properties of Cu coated Al2O3 particulate reinforced 6061 Al metal matrix composites, Mater. Today Proc. 4 (2017) 11015–11022 [CrossRef] [Google Scholar]
  19. V. Balaraj, N. Kori, M. Nagaral, V. Auradi, Influence of Al2O3 and B4C particles addition on the mechanical characterization of Al6061 alloy hybrid metal composites, Int. J. Vehicle Struct. Syst. 13 (2021) 624–629 [Google Scholar]
  20. B.N. Sarada, P.L. Srinivasa Murthy, G. Ugrasen, Hardness and wear characteristics of hybrid aluminium metal matrix composites produced by stir casting technique, Mater. Today Proc. 2 (2015) 2878–2885 [CrossRef] [Google Scholar]
  21. G. Veeresha, B. Manjunatha, V. Bharath, M. Nagaral, V. Auradi, Synthesis, microstructural characterization, mechanical, fractographic and wear behavior of micro B4C particles reinforced Al2618 alloy aerospace composites, Frattura e Integrita Strutturale 62 (2022) 385–407 [CrossRef] [Google Scholar]
  22. S. Krishna Prasad, S. Dayanand, M. Rajesh, M. Nagaral, V. Auradi, R. Selvaraj, Preparation and mechanical characterization of TiC particles reinforced Al7075 alloy composites, Adv. Mater. Sci. Eng. (2022) 7105189 [Google Scholar]
  23. N. Kumar, H.S. Kumar, T.H. Raju, Microstructural characterization, mechanical and Taguchi wear behavior of micro-titanium carbide particle-reinforced Al2014 alloy composites synthesized by advanced two-stage casting method, J. Bio Tribo-Corros. 8 (2022) 109 [CrossRef] [Google Scholar]
  24. V. Anjan Babu, V. Auradi, M. Nagaral, Mechanical and wear characterisation of boron carbide particles reinforced Al2030 alloy composites developed by two stage stir cast method, Adv. Mater. Process. Technolog. 8 (2022) 1–15 [Google Scholar]
  25. S. Matti, B.P. Shivakumar, M. Nagaral, S. Shashidhar, P.N. Siddappa, V. Auradi, Mechanical and tribological behavior of flyash, red mud and mica particles reinforced Al7075 alloy hybrid metal composites, Manufactur. Rev. 9 (2022) [Google Scholar]
  26. R. Kumar, R.G. Deshpande, B. Gopinath, J. Harti, M. Nagaral, V. Auradi, Mechanical fractography and worn surface analysis of nanographite and ZrO2-reinforced Al7075 alloy aerospace metal composites, J. Failure Anal. Prevent. 21 (2021) 525–536 [CrossRef] [Google Scholar]
  27. S. Attar, M. Nagaral, H.N. Reddappa, V. Auradi, Effect of B4C particulates addition on wear properties of Al7025 alloy composites, Am. J. Mater. Sci. 5 (2015) 53–57 [Google Scholar]
  28. M. Nagaral, V. Auradi, K.I. Parashivamurthy, B.K. Shivananda, S.A. Kori, Dry sliding wear behaviour of aluminium 6061-SiC-graphite particulates reinforced hybrid composites, IOP Conf. Ser.: Mater. Sci. Eng. 310 (2018) 012156 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.