Open Access
Issue
Manufacturing Rev.
Volume 10, 2023
Article Number 4
Number of page(s) 34
DOI https://doi.org/10.1051/mfreview/2023002
Published online 23 February 2023
  1. U.N. Kempaiah, N. Santhosh, D.H. Kumar, A.H. Chelgeri, P. Vishnu, S. Raorane, Characterization of high performance Al 5083/SiC/Fly Ash hybrid metal matrix composite for advanced aerospace applications, Int. J. Adv. Innov. Res. 3 (2015) 334–341 [Google Scholar]
  2. A.C. Gowda, D.P. Girish, N. Santhosh, A. Kumar, Study of wear characteristics of aluminium/B4C/CNT hybrid composites under the influence of controlled factors. Nano Trends A J. Nanotechnol. Appl. 18 (2016) 21–32 [Google Scholar]
  3. N. Santhosh, U.N. Kempaiah, S. Venkateswaran, Vibration mechanics of hybrid Al 5083/SiC/fly ash composite plates for its use in dynamic structures, J. Exp. Appl. Mech. 8 (2017) 11–18 [Google Scholar]
  4. N. Santhosh, U.N. Kempaiah, G. Sajjan, A.C. Gowda, Fatigue behaviour of silicon carbide and fly ash dispersion strengthened high performance hybrid Al 5083 metal matrix composites, J. Miner. Mater. Charact. Eng. 5 (2017) 274–287 [Google Scholar]
  5. N. Santhosh, U.N. Kempaiah, Vibration Characterization of SiC and fly ash dispersion strengthened aluminium 5083 composites, J. Aerosp. Eng. Technol. 7 (2017) 61–72 [Google Scholar]
  6. N. Santhosh, U.N. Kempaiah, R. Bhanupratap, Critically damped composite plates for structural applications in smart cities, in Proceedings of the International Conference on Development of Smart Cities, Interface, Governance & Technology, Dr Ambedkar Institute of Technology, Bangalore, Karnataka, India, 9–10 September 2016 (2016) [Google Scholar]
  7. M. Sadashiva, H.K. Shivanand, M. Rajesh, N. Santhosh, Corrosion behavior of friction stir welded Al 6061 hybrid metal matrix composite plates, in Proceedings of the International Conference on Advances in Mechanical Engineering Sciences (ICAMES-17), PESCE, Mandya, Karnataka, India, 21–22 April 2017 (2017) [Google Scholar]
  8. N. Santhosh, U.N. Kempaiah, A.C. Gowda, S. Rao, G. Hebbar, Evaluation of corrosion mechanics of silicon carbide and fly ash reinforced hybrid aluminium metal matrix composites, in Proceedings of the International Conference on Emerging Research in Civil, Aeronautical & Mechanical Engineering, ERCAM 2017, Nitte Meenakshi Institute of Technology, Bengaluru, India, 21 July 2017 (2017), pp. 214–218. [Google Scholar]
  9. K. Ramesha, P.D. Sudershanan, N. Santhosh, Mechanical and thermal characterization of friction stir weld joints of Al-Mg alloy, in Proceedings of the International Conference on Emerging Trends in Mechanical Engineering (ETME), Mandya, India, 27–29 December 2017 [Google Scholar]
  10. N. Santhosh, U.N. Kempaiah, Effect of heat treatment and reinforcements on mechanical properties of aerospace grade Aluminium composites at elevated temperatures, in Proceedings of the 2nd International Conference on Recent Research Emerging Trends in Mechanical & Civil Engineering, (ICRRETMCE-2018), REVA University, Bengaluru, Karnataka, India, 13–14 July 2018 (2018) [Google Scholar]
  11. N. Santhosh, U.N. Kempaiah, Effect of silicon carbide and fly ash on characteristics of Aluminium matrix composites for improved dynamic performance, in Proceedings of the Advanced Ceramics and Nano materials for Sustainable Development (ACeND-2018), CHRIST, Bangalore, Karnataka, India, 19–21 September 2018 (2018) [Google Scholar]
  12. N. Santhosh, U.N. Kempaiah, G.S. Sunil, Novel aluminium–SiC–fly ash hybrid metal matrix composites: synthesis and properties, J. Aerosp. Eng. Technol. 7 (2017) 26–33 [Google Scholar]
  13. N. Santhosh, U.N. Kempaiah, Influence of ceramic particulate reinforcements on fly ash dispersion strengthened composites for aircraft structures, J. Aerosp. Eng. Technol. 7 (2017) 38–45. [Google Scholar]
  14. T. Trzepiecinski, S.M. Najm, M. Sbayti, H. Belhadjsalah, M. Szpunar, H.G. Lemu, New advances and future possibilities in forming technology of hybrid metal–polymer composites used in aerospace applications, J. Compos. Sci. 5 (2021) 217 [CrossRef] [Google Scholar]
  15. N. Santhosh, G.M. Khan, A. Dubey, S. Patel, A. Phookan, Fabrication and characterization of tensile properties of aluminum 5083/silicon carbide/fly ash composites for advanced engineering applications, J. Polym. Compos. 6 (2018) 6–9 [Google Scholar]
  16. F. Rana, D.M. Stefanescu, Friction properties of Al-l.5 Pet Mg/SiC particulate metal-matrix composites, Metall. Mater. Trans. A 20 (1989) 1564–1566 [Google Scholar]
  17. K.S. Al Rubaie, H.N. Yoshimura, D.B. Mello, Two-body abrasive wear of Al–SiC composites, Wear 233–235 (1999) 444–454 [Google Scholar]
  18. Y. Sahin, Optimization of testing parameters on the wear behaviour of metal matrix composites based on the Taguchi method, Mater. Sci. Eng. A 408 (2005) 1–8 [Google Scholar]
  19. I. Mokashi, A. Afzal, S.A. Khan, N.A. Abdullah, M.H. Bin Azami, R. Jilte, O.D. Samuel, Nusselt number analysis from a battery pack cooled by different fluids and multiple back-propagation modelling using feed-forward networks. Int. J. Therm. Sci. 161 (2020) 106738 [Google Scholar]
  20. N. Santhosh, N. Manjunath, H.R. Mahesh, Potentiodynamic corrosion characterization of hybrid aluminium composites for advanced engineering applications, Int. J. Eng. Adv. Technol. 9 (2020) 1434–1437 [CrossRef] [Google Scholar]
  21. M. Akhtar, T. Sathish, V. Mohanavel, A. Afzal, K. Arul, M. Ravichandran, I. Rahim, S. Alhady, E. Bakar, B. Saleh, Optimization of process parameters in CNC turning of aluminum 7075 alloy using L27 array-based Taguchi method, Materials 14 (2021) 4470 [Google Scholar]
  22. M. Sadashiva, N.M. Siddeshkumar, J. Monica, M.R. Srinivasa, N. Santhosh, S. Praveenkumar, Hardness and impact strength characteristics of Al based hybrid composite FSW joints, Int. J. Vehicle Struct. Syst. 14 (2022) 13–17 [Google Scholar]
  23. M. Meignanamoorthy, M. Ravichandran, V. Mohanavel, A. Afzal, T. Sathish, S. Alamri, S. Khan, C. Saleel, Microstructure, Mechanical Properties, and Corrosion Behavior of Boron Carbide Reinforced aluminum alloy (Al-Fe-Si-Zn-Cu) matrix composites produced via powder metallurgy route, Materials 14 (2021) 4315 [Google Scholar]
  24. K. Ramesha, N. Santhosh, K. Kiran, N. Manjunath, H. Naresh, Effect of the process parameters on machining of GFRP composites for different conditions of abrasive water suspension jet machining, Web Sci. Scopus 9 (2019) 1–11 [Google Scholar]
  25. T. Sathish, A. Kaladgi, V. Mohanavel, K. Arul, A. Afzal, A. Aabid, M. Baig, B. Saleh, Experimental investigation of the friction stir weldability of AA8006 with zirconia particle reinforcement and optimized process parameters, Materials 14 (2021) 2782 [Google Scholar]
  26. N. Santhosh, B.A. Praveena, R. Jain, M. Abul Hasan, S. Islam, M. Amir Khan, A. Razak, Md Daniyal, Analysis of friction and wear of aluminium AA 5083/WC composites for building applications using advanced machine learning models, Ain Shams Eng. J. (2022) 102090 [CrossRef] [Google Scholar]
  27. N. Santhosh, B.A. Praveena, A. Chandrashekar, V. Mohanavel, S. Raghavendra, D. Basheer, Wear behaviour of aluminium alloy 5083/SiC/fly ash inoculants based functional composites– optimization studies, Mater Res Express 9 (2022) 076513 [Google Scholar]
  28. G. Ravichandran, G. Rathnakar, N. Santhosh, R. Suresh, Wear characterization of HNT filled glass-epoxy composites using Taguchi’s design of experiments and study of wear morphology, Compos. Theory Practice 20 (2020) 85–91 [Google Scholar]
  29. G. Ravichandran, G. Rathnakar, N. Santhosh, R. Thejaraju, Antiwear performance evaluation of halloysite nanotube (HNT) filled polymer nanocomposites, Int. J. Eng. Adv. Technol. 9 (2019) 3314–3321 [CrossRef] [Google Scholar]
  30. M.R. Srinivasa, Y.S. Rammohan, M. Sadashiva, N. Santhosh, Effect of shock waves on the hardness of graphene reinforced aluminium composites, J. Polym. Compos. 8 (2020) 32–38 [Google Scholar]
  31. K. Ramesha, P.D. Sudersanan, N. Santhosh, S. Jangam, “Corrosion characterization of friction stir weld joints of dissimilar aluminum alloys, EAI/Springer Innov. Commun. Comput. (2021) https://doi.org/10.4108/eai.16-5-2020.2304097 [Google Scholar]
  32. K. Ramesha, P.D. Sudersanan, N. Santhosh, S. Jangam, Sustainable processing of dissimilar aluminium alloy joints by friction stir welding, IOP Conf. Ser.: Mater. Sci. Eng. 1132 (2021) 012029 [CrossRef] [Google Scholar]
  33. K. Ramesha, P.D. Sudersanan, N. Santhosh, S. Jangam, Design and optimization of the process parameters for friction stir welding of dissimilar aluminium alloys, Eng. Appl. Sci. Res. 48 (2021) 257–267 [Google Scholar]
  34. K. Ramesha, P.D. Sudersanan, P.K. Mahto, S.M. Ismail, A.C. Gowda, N. Santhosh, V. Umesh, Influence of heat treatment on the tensile and hardness characteristics of friction stir weld joints of dissimilar aluminium alloys, AIP Conf. Proc. 2421 (2022) 030001 [CrossRef] [Google Scholar]
  35. K. Ramesha, P.D. Sudersanan, A.C. Gowda, N. Santhosh, S. Jangam, N. Manjunath, Friction stir welding of dissimilar aluminium alloys for vehicle structures, Int. J. Vehicle Struct. Syst. 14 (2022) 5–9 [Google Scholar]
  36. N. Santhosh, B.A. Praveena, H.V. Srikanth, S. Angadi, A. Gunge, M. Rudra Naik, G. Shankar, K. Ramesha, G. Ravichandran, Experimental investigations on static, dynamic, and morphological characteristics of bamboo fiber-reinforced polyester composites, Int. J. Polym. Sci. 2022 (2022) 1916877 [CrossRef] [Google Scholar]
  37. N. Santhosh, B.A. Praveena, A. Chandrashekar, V. Mohanavel, S. Raghavendra, D. Basheer, Wear behaviour of aluminium alloy 5083/SiC/fly ash inoculants based functional composites – optimization studies, Mater. Res. Express 9 (2022) 076513 [Google Scholar]
  38. S. Nagaraja, K.U. Nagegowda, V.A. Kumar, S. Alamri, A. Afzal, D. Thakur, A.R. Kaladgi, S. Panchal, C.A. Saleel, Influence of the fly ash material inoculants on the tensile and impact characteristics of the aluminum AA 5083/7.5SiC composites, Materials 14 (2021) 2452 [Google Scholar]
  39. V. Bharath, V. Auradi, G.B.V. Kumar, M. Nagaral, M. Chavali, M. Helal, R. Sami, N. Aljuraide, J.W. Hu, A.M. Galal, Microstructural evolution, tensile failure, fatigue behavior and wear properties of Al2O3 reinforced Al2014 alloy T6 heat treated metal composites, Materials 15 (2022) 4244 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.