Open Access
Manufacturing Rev.
Volume 11, 2024
Article Number 3
Number of page(s) 11
Published online 06 February 2024
  1. T. Zeng, Design and manufacture of spiral bevel and hypoid gears, Harbin Institute of Technology, 1989. (in Chinese) [Google Scholar]
  2. B.A. Shtipelman, A Wiley-Interscience Publication: Design and manufacture of hypoid gears, New York, 1978 [Google Scholar]
  3. F.L. Litvin, A. Fuentes, K. Hayasaka, Design, manufacture, stress analysis, and experimental tests of low-noise high endurance spiral bevel gears, Mech. Mach. Theory, 41 (2006) 83–118 [Google Scholar]
  4. Gleason Works, Calculation instructions generated hypoid gears duplex helical method, The Gleason Works, New York, 1971 [Google Scholar]
  5. J. Pisula, M. Płocica, Numerical model of bevel gears cutting by duplex helical method, Key Eng. Mater. 490 (2011) 237–246 [CrossRef] [Google Scholar]
  6. C.B. Tsay, J.Y. Lin, A mathematical model for the tooth geometry of hypoid gears, Math. Comput. Modell. 18 (1993) 23–34 [CrossRef] [Google Scholar]
  7. A. Gonzalez-Perez, Fuentes, K. Hayasaka, Computerized design and tooth contact analysis of spiral bevel gears generated by the duplex helical method, ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, American Society of Mechanical Engineers, Washington DC, United states, 2011, pp. 149–158 [Google Scholar]
  8. Y. Zhang, H.Z. Yan, T. Zeng, Computerized design and simulation of meshing and contact of formate hypoid gears generated with a duplex helical method, Strojniski Vestnik-J. Mech. Eng. 61 (2015) 523–532 [CrossRef] [Google Scholar]
  9. Y. Zhang, H.Z. Yan, T. Zeng, Cutting principle and tooth contact analysis of spiral bevel and hypoid gears generated by duplex helical method, J. Mech. Eng. 51 (2015) 15–23. [Google Scholar]
  10. Y. Zhang, H.Z. Yan, New methodology for determining basic machine settings of spiral bevel and hypoid gears manufactured by duplex helical method, Mech. Mach. Theory 100 (2016) 283–295 [Google Scholar]
  11. L.L. Geng, X.Z. Deng, J. Deng, Calculation and experiment of spiral bevel gear by duplex helical method predesigned contact path, J. Adv. Mech. Des. Syst. Manuf. 15 (2021) 1–17 [Google Scholar]
  12. C.G. Lv, J.Q. Luo, H.J. Wang, Tooth cutting calculation of helical double-sided machining of small module quasi-hyperboloid bevel, J. Mech. Transm. 42 (2018) 92–94 [Google Scholar]
  13. Beijing Gear Factory. Spiral bevel gear [M], Science Press, Beijing, 1974. (in Chinese) [Google Scholar]
  14. Q. Fan, Enhanced algorithms of contact simulation for hypoid gear drives produced by face-milling and face-hobbing processes, J. Mech. Des. 129 (2007) 1–7 [CrossRef] [Google Scholar]
  15. X.M. Cao, X.Z. Deng, B.Y. Wei, A novel method for gear tooth contact analysis and experimental validation, Mech. Mach. Theory 126 (2018) 1–13 [CrossRef] [Google Scholar]
  16. M. Vivet, D. Mundo, T. Tamarozzi, An analytical model for accurate and numerically efficient tooth contact analysis under load, applied to face-milled spiral bevel gears, Mech. Mach. Theory 130 (2018) 137–156 [CrossRef] [Google Scholar]
  17. H.H. Ze, H. Ding, S.D. Peng, Numerical determination to loaded tooth contact performances in consideration of misalignment for the spiral bevel gears, Int. J. Mech. Sci. 151 (2019) 343–355 [CrossRef] [Google Scholar]
  18. J. Pisula, An analysis of the effect of the application of helical motion and assembly errors on the meshing of a spiral bevel gear using duplex helical method, Adv. Manuf. Sci. Technol. 40 (2016) 1–14 [Google Scholar]
  19. L.L. Geng, X.Z. Deng, H. Zhang, Theory and experimental research on spiral bevel gear by double-side milling method, Mech. Ind. 22 (2021) 1–11 [CrossRef] [EDP Sciences] [Google Scholar]
  20. Y. Zhang, H.Z. Yan, Z.Y. Wang, The influence rules of cutter parameters on the contact characteristics of tooth surfaces by five cut processes and the duplex helical method, Strojniški Vestnik − J. Mech. Eng. 65 (2019) 351–365 [CrossRef] [Google Scholar]
  21. S.X. Wu, H.Z. Yan, Z.Y. Wang, Tool profile modification of hypoid gear machined by duplex helical method, Int. J. Adv. Manuf. Technol. 119 (2021) 1–14 [Google Scholar]
  22. L.L. Geng, X.Z. Deng, X.M. Cao, Research on tooth contact analysis (TCA) for spiral bevel gear based on duplex spread blade [J], Mech. Transm. 38 (2014) 34–36. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.