Open Access
Manufacturing Rev.
Volume 11, 2024
Article Number 2
Number of page(s) 15
Published online 23 January 2024
  1. G. Jie, M. Qingchao, S. Yan, W. Kangning, S. Qiang, W. Canming, Effect of Nb content on microstructure and corrosion resistance of Inconel 625 coating formed by laser cladding, Surf. Coat. Technol. 458 (2023) 12931 [Google Scholar]
  2. A. Grabos, P. Rutkowski, J. Huebner, P. Nieroda, D. Kata, S. Hayashi, Thermal properties of Inconel 625-NbC metal matrix composites (MMC), Mater. De. 224 (2022) 111399 [CrossRef] [Google Scholar]
  3. F. Chena, Q. Wang, C. Zhang, Z. Huang, M. Jia, Q. Zhang, Mcrostructures and mechanical behaviors of additive manufactured Inconel 625 alloys via selective laser melting and laser engineered net shaping, J. Alloys Compd. 917 (2022) 165572 [CrossRef] [Google Scholar]
  4. D. Ren, Z. Xue, Y. Jiang, X. Hu, Y. Zhang, Influence of single tensile overload on fatigue crack propagation behavior of the selective laser melting Inconel 625 superalloy, Eng. Fract. Mech. 239 (2020) 107305 [CrossRef] [Google Scholar]
  5. L. Zhou, S. Chen, C. Zhang, J. Liang, T. Cui, C. Liu, M. Wang, Microstructure evolution and properties of direct laser deposited 24CrNiMoY alloy steel assisted by non-contact ultrasonic treatment, Mater. Sci. Eng. A 811 (2021) 141088 [CrossRef] [Google Scholar]
  6. N. Shamsaei, A. Yadollahi, L. Bian, S.M. Thompson, An overview of direct laser deposition for additive manufacturing; Part II: mechanical behavior, process parameter optimization and control, Additive Manuf. 8 (2015) 12–35 [CrossRef] [Google Scholar]
  7. Z.U. Arif, M.Y. Khalid, E. Rehman, Laser-aided additive manufacturing of high entropy alloys: processes, properties, and emerging applications, J. Manuf. Processes 78 (2022) 131−171 [CrossRef] [Google Scholar]
  8. Z. Lin, C. Suiyuan et al., Microstructure and properties of 24CrNiMoY alloy steel prepared by direct laser deposited under different preheating temperatures, Mater. Character. 158 (2019) 109931 [CrossRef] [Google Scholar]
  9. L. Shihua, C. Bo, T. Caiwang, S. Xiaoguo, Effects of oxygen content on microstructure and mechanical properties of 18Ni300 maraging steel manufactured by laser directed energy deposition, Opt. Laser Technol. 153 (2022) 108281 [CrossRef] [Google Scholar]
  10. J. Wang, W. Yachao, S. Yutai, J. Shi, Evaluation of in-situ alloyed Inconel 625 from elemental powders by laser directed energy deposition, Mater. Sci. Eng. 830 (2022) 142296 [CrossRef] [Google Scholar]
  11. Z. Songtao, B. Fengqin, W. Tao et al., Microstructural investigation of the effect of hot-isostatic-pressing treatment on a laser powder bed fused type 316L stainless steel, Mater. Character. 197 (2023) 112716 [CrossRef] [Google Scholar]
  12. E. Foroozmehr, R Kovacevic, Effect of path planning on the laser powder deposition process: thermal and structural evaluation, Int. J. Adv. Manuf. Technol. 51 (2010) 659–669 [CrossRef] [Google Scholar]
  13. R. Li, G. Wang, X. Zhao et al., Effect of path strategy on residual stress and distortion in laser and cold metal transfer hybrid additive manufacturing, Additive Manuf. 46 (2021) 102203 [CrossRef] [Google Scholar]
  14. J. Huang, Z. Guan, S. Yu et al., A 3D dynamic analysis of different depositing processes used in wire arcadditive manufacturing, Mater. Today Commun. 24 (2020) 101255 [CrossRef] [Google Scholar]
  15. Y. Huang, X. Zeng, Investigation on cracking behavior of Ni-based coating by laser-induction hybrid cladding, Appl. Surf. Sci. 256 (2010) 5985−5992 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.