Issue
Manufacturing Rev.
Volume 12, 2025
Special Issue - 21st International Conference on Manufacturing Research - ICMR2024
Article Number 4
Number of page(s) 12
DOI https://doi.org/10.1051/mfreview/2024025
Published online 24 January 2025
  1. A.B.M.A. Asad, T. Masaki, M. Rahman, H.S. Lim, Y.S. Wong, Tool-based micro-machining, J. Mater. Process. Technol. 192–193 (2007) 204–211 [CrossRef] [Google Scholar]
  2. V. Saile, U. Wallrabe, O. Tabata, J.G. Korvink, LIGA and Its Applications, WILEY-VCH Verlag GmbH & Co. KGaA (2008) [CrossRef] [Google Scholar]
  3. R. Leuschner, G. Pawlowski, Photolithography, K.A. Jackson, W. Schröter, Handbook of Semiconductor Technology: Processing of Semiconductors, WILEY-VCH Verlag GmbH (2000) Chapter 4, pp. 177–263 [Google Scholar]
  4. K. Rykaczewski, O.J. Hildreth, C.P. Wong, A.G. Fedorov, J.H.J. Scott, Guided three-dimensional catalyst folding during metal-assisted chemical etching of silicon, Nano Lett. 11(2011) 2369–2374 [CrossRef] [Google Scholar]
  5. R.M. German, A. Bose, Injection Molding of Metals and Ceramics, Metal Powder Industries Federation, Princeton, 1997 [Google Scholar]
  6. P. Imgrund, A. Rota, H. Schmidt, G. Capretti, µ-MIM: making the most of NiTi, Metal Powder Report 63 (2008) 21–24 [CrossRef] [Google Scholar]
  7. M. Wolff, J.G. Schaper, M.R. Suckert, M. Dahms, F. Feyerabend, T. Ebel, R. Willumeit-Römer, T. Klassen, Metal injection molding (MIM) of magnesium and its alloys, Metals 6 (2016) 118. [CrossRef] [Google Scholar]
  8. S.T. Islam, S.K. Samanta, Nagahanumaniah, H. Roy, A.K. Lohar, S. Das, A. Bandyopadhyay, Rheological behavior of 316L stainless steel feedstock for µ-MIM, Mater. Today: Proc. 5 (2018) 8152–8158 [CrossRef] [Google Scholar]
  9. S. Tanaka, Overview of MIM technology development in the last 25 years through our µ-MIM technology, Powder Metall. 70 (2023) 155–159 [Google Scholar]
  10. F. Blaha, B. Langenecker, Dehnung von Zink-Kristallen unter Ultraschalleinwirkung, Naturwissenschaften 42 (1955) 556 [CrossRef] [Google Scholar]
  11. J.C. Tucker, Ultrasonic Welding of Copper to Laminate Circuit Board, Worcester Polytechnic Institute, 2002 [Google Scholar]
  12. M.G. Nik, M.R. Movahhedy, J. Akbari, Ultrasonic-assisted grinding of Ti6Al4V alloy, Proc. CIRP 1 (2012) 353–358 [CrossRef] [Google Scholar]
  13. D.F. Walczyk, S. Vittal, Bending of titanium sheet using laser forming, J. Manufactur. Process. 2 (2000) 258–269 [CrossRef] [Google Scholar]
  14. G.C. Verma, P.M. Pandey, U.S. Dixit, Modeling of static machining force in axial ultrasonic-vibration assisted milling considering acoustic softening, Int. J. Mech. Sci. 136 (2018) 1–16 [CrossRef] [Google Scholar]
  15. T. Jimma, Y. Kasuga, N. Iwaki, O. Miyazawa, E. Mori, K. Ito, H. Hatano, An application of ultrasonic vibration to the deep drawing process, J. Mater. Process. Technol. 80–81 (1998) 406–412 [CrossRef] [Google Scholar]
  16. Y. Bai, M. Yang, Optimization of metal foils surface finishing using vibration-assisted micro-forging, J. Mater. Process. Technol. 214 (2014) 21–28 [CrossRef] [Google Scholar]
  17. Z. Yao, G.Y. Kim, L. Faidley, Q. Zou, D. Mei, Z. Chen, Effects of superimposed high-frequency vibration on deformation of aluminum in micro/meso-scale upsetting, J. Mater. Process. Technol. 212 (2012) 640–646 [CrossRef] [Google Scholar]
  18. C. Bunget, G. Ngaile, Influence of ultrasonic vibration on micro-extrusion, Ultrasonics 51 (2011) 606–616 [CrossRef] [Google Scholar]
  19. Y. Bai, M. Yang, Influence of ultrasonic vibration on metal foils surface finishing with micro-forging, Proc. Eng. 81 (2014) 1475–1480 [CrossRef] [Google Scholar]
  20. Y. Bai, K. Nishikawa, M. Yang, Metal surface modification with vibration-aided micro-forging, Mater. Trans. 53 (2012) 489–494 [CrossRef] [Google Scholar]
  21. D. Meng, X. Zhao, J. Li, S. Zhao, Q. Han, Mechanical behavior and microstructure of low-carbon steel undergoing low-frequency vibration-assisted tensile deformation, J. Mater. Res. 32 (2017) 3885–3893 [CrossRef] [Google Scholar]
  22. J. Hu, T. Shimizu, M. Yang, Investigation on ultrasonic volume effects: stress superposition, acoustic softening and dynamic impact, Ultrason. Sonochem. 48 (2018) 240–248 [CrossRef] [Google Scholar]
  23. H. Nakajima, Fabrication, properties and application of porous metals with directional pores, Progr. Mater. Sci. 52 (2007) 1091–1173 [CrossRef] [Google Scholar]
  24. J.P. Arenas, M.J. Croker, Recent trends in porous sound-absorbing materials, Sound Vibr. 44 (2010) 12–17 [Google Scholar]
  25. S. Nisimaki, editor. Electro-acoustics and vibration. Corona Publishing Co. Ltd., Tokyo 1971 [Google Scholar]
  26. M. Kobashi, Processing and pore morphology control of porous metals by powder processing route, Powder Metall. 64 (2017). https://doi.org/10.2497/jjspm.64.61 [Google Scholar]
  27. Z. Yin, M. Yang, Investigation on deformation behavior in the surface of metal foil with ultrasonic vibration-assisted micro-forging, Materials 15 (2022) 1907 [Google Scholar]
  28. J. Hu, T. Shimizu, M. Yang, Impact effect of superimposed ultrasonic vibration on material characteristics in compression tests, Proc. Eng. 207 (2017) 1063–1068 [CrossRef] [Google Scholar]
  29. Z. Yin, W. Wan, M. Yang, An evaluation of impact effect on the surface microstructure and its induced temperature change during ultrasonic-assisted micro-forging, Materials 17 (2024) 4123 [CrossRef] [Google Scholar]
  30. Y. Bai, M. Yang, Optimization of metal foils surface finishing using vibration assisted micro forging, J. Mater. Process. Technol. 214 (2014). https://doi.org/10.1016/j.jmatprotec.2013.07.011 [Google Scholar]
  31. Y. Bai, M. Yang, The influence of superimposed ultrasonic vibration on surface asperities deformation, J. Mater. Process. Technol. 229 (2016) 367–374 [CrossRef] [Google Scholar]
  32. R. Kakimoto, M. Koyama, K. Tsuzaki, EBSD- and ECCI-based assessments of inhomogeneous plastic strain evolution coupled with digital image correlation, ISIJ Int. 59 (2019) 2334–2342 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.