EDP Sciences logo
Submit your paper
Search
Menu
Home All issues Volume 12 (2025) Manufacturing Rev., 12 (2025) 22 References
Open Access
Issue
Manufacturing Rev.
Volume 12, 2025
Article Number 22
Number of page(s) 16
DOI https://doi.org/10.1051/mfreview/2025017
Published online 06 October 2025
  1. T. Taylor, Critical review of automotive hot-stamped sheet steel from an industrial perspective, Mater. Sci. Technol. 34 (2018) 809–861 [CrossRef] [Google Scholar]
  2. T. Maeno, K. Mori, R. Yachi, Hot stamping of high-strength aluminium alloy aircraft parts using quick heating, CIRP Annals. 66 (2017) 269–272 [Google Scholar]
  3. H. Karbasian, A. Tekkaya, A review on hot stamping, J. Mater. Process. Technol. 210 (2010) 2103–2118 [CrossRef] [Google Scholar]
  4. G. Atxaga, A. Arroyo, B. Canflanca, Hot stamping of aerospace aluminium alloys: automotive technologies for the aeronautics industry, J. Manuf. Process. 81 (2022) 817–827 [Google Scholar]
  5. J. Lv, J. Yu, Z. Shi, W. Li, J. Lin, Feasibility study of a novel multi-container extrusion method for manufacturing wide aluminium profiles with low force, J. Manuf. Process. 85 (2023) 584–593 [Google Scholar]
  6. Y. Li, Y. Zhang, S. Li, Viscoplastic constitutive modeling of boron steel under large strain conditions and its application in hot semi-cutting, J. Manuf. Process. 66 (2021) 532–548 [Google Scholar]
  7. H. Xiao, X. Fan, M. Zhan, B. Liu, Z. Zhang, Flow stress correction for hot compression of titanium alloys considering temperature gradient induced heterogeneous deformation, J. Mater. Process. Technol. 288 (2021) 116868 [CrossRef] [Google Scholar]
  8. S. Jiang, Z. Zhang, Z. Shi, J. Lin, Unravelling dynamic recrystallisation behaviour in AA7050 under hot forging conditions, Mater. Charact. 211 (2024) 113887 [Google Scholar]
  9. H. Li, L. He, G. Zhao, L. Zhang, Constitutive relationships of hot stamping boron steel B1500HS based on the modified Arrhenius and Johnson-Cook model, Mater. Sci. Eng.: A. 580 (2013) 330–348 [Google Scholar]
  10. R. Zhang, J. Jiang, J. Lin, V. Yardley, Investigation of variability in apparent values of materials properties in thermo-mechanical uniaxial tensile tests on sheet metals, J. Manuf. Process. 101 (2023) 737–754 [Google Scholar]
  11. Y. Li, S. Li, Y. Chen, G. Han, Constitutive parameters identification based on DIC assisted thermo-mechanical tensile test for hot stamping of boron steel, J. Mater. Process. Technol. 271 (2019) 429–443 [Google Scholar]
  12. J. Rakhmonov, M. Qassem, D. Larouche, K. Liu, M. Josée, J. Colbert et al., A new approach to determine tensile stress-strain evolution in semi-solid state at near-solidus temperature of aluminum alloys. Metals. 11 (2021) 1–13. [Google Scholar]
  13. A. Phillion, S. Thompson, S. Cockcroft, M. Wells, Tensile properties of as-cast aluminum alloys AA3104, AA6111 and CA31218 at above solidus temperatures, Mater. Sci. Eng.: A. 497 (2008) 388–394 [Google Scholar]
  14. T. Baross, P. Bereczki, L. Jánosi, G. Veres, The bonded area growth at diffusion bonding determined by the numerical modelling of Gleeble 3800 experiments and in comparison with the model by Hill and Wallach, Fusion Eng. Des. 194 (2023) 113707 [Google Scholar]
  15. A. Bolouri, K. Liu, X. Chen, Effects of iron-rich intermetallics and grain structure on semisolid tensile properties of Al-Cu 206 cast alloys near solidus temperature, Metall. Mater. Trans. A. 47 (2016) 6466–6480 [Google Scholar]
  16. A. Nikki, K. Prakriti, K. Vinod, K. Nilesh, A. Ramkishor, D. Sourav, Simulated stress induced sensitization of HAZ in multipass weld of 304LN austenitic stainless steel, J. Manuf. Process. 62 (2021) 784–796 [Google Scholar]
  17. C. Bennett, S. Leen, E. Williams, P. Shipway, T. Hyde, A critical analysis of plastic flow behaviour in axisymmetric isothermal and Gleeble compression testing, Comput. Mater. Sci. 50 (2010) 125–137 [Google Scholar]
  18. A. Phillion, S. Cockcroft, P. Lee, A new methodology for measurement of semi-solid constitutive behavior and its application to examination of as-cast porosity and hot tearing in aluminum alloys, Mater. Sci. Eng.: A. 491 (2008) 237–247 [Google Scholar]
  19. A. Mishchenko, A. Scotti, Welding thermal stress diagrams as a means of assessing material proneness to residual stresses, J. Mater. Sci. 56 (2021) 1694–1712 [Google Scholar]
  20. M. Ganapathy, N. Li, J. Lin, M. Abspoel, D. Bhattacharjee, A novel grip design for high-accuracy thermo-mechanical tensile testing of boron steel under hot stamping conditions, Exp. Mech. 58 (2018) 243–258 [Google Scholar]
  21. N. Li, C. Sun, N. Guo, M. Mohamed, J. Lin, T. Matsumoto et al., Experimental investigation of boron steel at hot stamping conditions, J. Mater. Process. Technol. 228 (2016) 2–10 [Google Scholar]
  22. J. Zhou, B. Wang, M. Huang, Two constitutive descriptions of boron steel 22MnB5 at high temperature, Mater. Des. 63 (2014) 738–748 [Google Scholar]
  23. H. Wang, P. Ge, S. Wu, B. Wang, Y. Wang, X. Kong et al., Improvement method of high-temperature digital image correlation measurement accuracy based on image processing, Measurement. 190 (2022) 110723 [Google Scholar]
  24. Y. Wang, W. Zhang, H. Huang, W. Zhong, Chen, F. Zhili, Clarification of creep deformation mechanism in heat-affected zone of 9Cr steels with In Situ experiments, Scripta Mater. 194 (2021) 113640 [Google Scholar]
  25. Z. Shao, N. Li, J. Lin, T. Dean, Development of a new biaxial testing system for generating forming limit diagrams for sheet metals under hot stamping conditions, Exp. Mech. 56 (2016) 1489–1500 [CrossRef] [Google Scholar]
  26. S. Chen, R. Zhang, Z. Shi, J. Lin, An improved DIC method for full-field strain measurement in tensile tests on aluminium alloys under hot stamping conditions, Int. J. Lightweight Mater. Manuf. 7 (2024) 438–449 [Google Scholar]
  27. R. Zhang, Z. Shao, J. Lin, T. Dean, Measurement and analysis of heterogeneous strain fields in uniaxial tensile tests for boron steel under hot stamping conditions, Exp. Mech. 60 (2020) 1289–300 [Google Scholar]
  28. Y. Li, S. Li, Y. Chen, G. Han, Constitutive parameters identification based on DIC assisted thermo-mechanical tensile test for hot stamping of boron steel, J. Mater. Process. Technol. 271 (2019) 429–443 [Google Scholar]
  29. J. Huh, H. Huh, C. Lee, Effect of strain rate on plastic anisotropy of advanced high strength steel sheets, Int. J. Plast. 44 (2013) 23–46 [Google Scholar]
  30. F. Shen, S. Münstermann, J. Lian, An evolving plasticity model considering anisotropy, thermal softening and dynamic strain aging, Int. J. Plast. 132 (2020) 102747 [Google Scholar]
  31. S. Kurukuri, A. Miroux, M. Ghosh, A. Boogaard, Effect of temperature on anisotropy in forming simulation of aluminum alloys, Int. J. Mater. Forming. 2 (2009) 387–390 [Google Scholar]
  32. D. Pagan, J. Bernier, D. Dale, J. Peter, T. Turner, B. Blank et al., Measuring Ti-7Al slip system strengths at elevated temperature using high-energy X-ray diffraction, Scripta Mater. 142 (2018) 96–100 [Google Scholar]
  33. B. Zhao, P. Huang, L. Zhang, S. Li, Z. Zhang, Q. Yu, Temperature effect on stacking fault energy and deformation mechanisms in titanium and titanium-aluminium alloy, Sci. Rep. 10 (2020) 3086 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.