EDP Sciences logo
Submit your paper
Sciengine logo
Search
Menu
Home All issues Volume 12 (2025) Manufacturing Rev., 12 (2025) 23 References
Open Access
Issue
Manufacturing Rev.
Volume 12, 2025
Article Number 23
Number of page(s) 12
DOI https://doi.org/10.1051/mfreview/2025018
Published online 14 October 2025
  1. F.A. Marandi, A.H. Jabbari, M. Sedighi, R. Hashemi, An experimental, analytical, and numerical investigation of hydraulic bulge test in two-layer Al-Cu sheets, J. Manuf. Sci. Eng. 139 (2017) 10 [Google Scholar]
  2. J.J. Homan, Fatigue initiation in fibre metal laminates, Int. J. Fatigue 28 (2006) 366–374 [Google Scholar]
  3. H.-C. Tseng, C. Hung, C.-C. Huang, An analysis of the formability of aluminum/copper clad metals with different thicknesses by the finite element method and experiment, Int. J. Adv. Manuf. Technol. 49 (2010) 1029–1036 [Google Scholar]
  4. R. Zafar, L. Lihui, R. Zhang, Analysis of hydro-mechanical deep drawing and the effects of cavity pressure on quality of simultaneously formed three-layer Al alloy parts, Int. J. Adv. Manuf. Technol. 80 (2015). https://doi.org/10.1007/s00170-015-7142-y [Google Scholar]
  5. R.-j. Zhang, L.-H. Lang, R. Zafar, K. Li, L. Wu, Effect of gap generator blank thickness on formability in multilayer stamp forming process, Trans. Nonferrous Metals Soc. China 26 (2016) 2442–2448 [Google Scholar]
  6. S. Kalyanasundaram, S. Dhar Malingam, S. Venkatesan, A. Sexton, Effect of process parameters during forming of self-reinforced − PP based fiber metal laminate, Compos. Struct. 97 (2013) 332–337 [Google Scholar]
  7. T. Sinmazçelik, E. Avcu, M.Ö. Bora, O. Çoban, A review: fibre metal laminates, background, bonding types and applied test methods, Mater. Des. 32 (2011) 3671–3685 [Google Scholar]
  8. J.G. Carrillo, W.J. Cantwell, Mechanical properties of a novel fiber-metal laminate based on a polypropylene composite, Mech. Mater. 41 (2009) 828–838 [Google Scholar]
  9. M.R. Morovvati, A. Fatemi, M. Sadighi, Experimental and finite element investigation on wrinkling of circular single layer and two-layer sheet metals in deep drawing process, Int. J. Adv. Manuf. Technol. 54 (2011) 113–121 [Google Scholar]
  10. M. Nourjani Pourmoghadam, R. Shahrokh Esfahani, M.R. Morovvati, B. Nekooei Rizi, Bifurcation analysis of plastic wrinkling formation for anisotropic laminated sheets (AA2024-Polyamide-AA2024), Comput. Mater. Sci. 77 (2013) 35–43 [Google Scholar]
  11. M. Fazlollahi, M. Morovvati, B. Dariani, Theoretical, numerical and experimental investigation of hydro-mechanical deep drawing of steel/polymer/steel sandwich sheets, Proc. Inst. Mech. Eng. Part B: J. Eng. Manuf. 233 (2018) 095440541878017 [Google Scholar]
  12. M.R. Saeedi, M.R. Morovvati, B. Mollaei-Dariani, Experimental and numerical investigation of impact resistance of aluminum-copper cladded sheets using an energy-based damage model, J. Braz. Soc. Mech. Sci. Eng. 42 (2020) 310 [Google Scholar]
  13. Y. Wang, L.-H. Lang, T.-J. Gao, Q.-D. Zhang, Flow property of AA2B06 sheet using overlapping elliptical bulge test, Trans. Nonferrous Metals Soc. China 26 (2016) 2179–2187 [Google Scholar]
  14. W. Liu, Y.-Z. Chen, L. Hu, Z.-C. Zhang, Deformation of large curved shells using double-sided pressure sheet hydroforming process, Int. J. Lightweight Mater. Manuf. 5 (2022) 397–410 [Google Scholar]
  15. A. Aghchai, M. Shakeri, B. Mollaei-Dariani, Theoretical and experimental formability study of two-layer metallic sheet (Al1100/St12), Proc. Inst. Mech. Eng. Part B: J. Eng. Manuf. 222 (2008) 1131–1138 [Google Scholar]
  16. A. Marques, P. Prates, A. Pereira, N. Sakharova, M. Oliveira, J. Fernandes, Numerical study on the forming behaviour of multilayer sheets, Metals 10 (2020) 716 [Google Scholar]
  17. X. Yue, J. Wang, X. Li, L. You, H. Ru, Microstructures and mechanical properties of a two-layer B4C/Al-B4C/TiB2 composite, Mater. Sci. Eng. A 559 (2013) 719–724 [Google Scholar]
  18. T. Sakaki, K. Kakehi, Y. Ohtakara, Plastic anisotropy of clad sheets, Int. J. Plast. 7 (1991) 505–527 [Google Scholar]
  19. T.A.K.S. Mori, Press-formability of stainless steel and aluminum clad sheet, J. Mater. Process. Technol. 55 (1996). https://api.semanticscholar.org/CorpusID:135684254 [Google Scholar]
  20. H.D. Manesh, A.K. Taheri, Theoretical and experimental investigation of cold rolling of tri-layer strip, J. Mater. Process. Technol. 166 (2005) 163–172 [Google Scholar]
  21. L. Lang, J. Danckert, K.B. Nielsen, Multi-layer sheet hydroforming: experimental and numerical investigation into the very thin layer in the middle, J. Mater. Process. Technol. 170 (2005) 524–535 [Google Scholar]
  22. K. Pazand, A. Moarrefzadeh, M.R. Morovvati, Experimental and numerical evaluation of formability in three-layer metallic sheets with various layer arrangements, Eng. Res. Express 4 (2022). https://doi.org/10.1088/2631-8695/ac89ce [Google Scholar]
  23. X.J. Liu, Z.H. Zhang, X.F. Ma, C. Li, Y.Y. Zhou, Study on hydroforming of AA6061-T6 aluminum alloy sheet based on upper sheet, Int. J. Adv. Manuf. Technol. 123 (2022) 4447–4464 [Google Scholar]
  24. A.Y. Nourouzi, M. Bakhshi JooyPai, H. Gorji, Experimental study of drawing load curves in forming conical parts by hydroforming and conventional deep drawing processes, Adv. Mater. Res. (2011) 556 –560. https://doi.org/10.4028/www.scientific.net/AMR.291-294.556 [Google Scholar]
  25. P.L. Menezes, Kishore, S.V. Kailas, M.R. Lovell, Friction and transfer layer formation in polymer-steel tribo-system: role of surface texture and roughness parameters, Wear 271 (2011) 2213–2221 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.