EDP Sciences logo
Submit your paper
Sciengine logo
Search
Menu
Home All issues Volume 13 (2026) Manufacturing Rev., 13 (2026) 7 References
Open Access
Issue
Manufacturing Rev.
Volume 13, 2026
Article Number 7
Number of page(s) 9
DOI https://doi.org/10.1051/mfreview/2026002
Published online 20 February 2026
  1. C.A. Romero, P. Correa, E.A. Ariza Echeverri, D. Vergara, Strategies for reducing automobile fuel consumption, Appl. Sci. 14 (2024) 910 [CrossRef] [Google Scholar]
  2. R. Rana, S.B. Singh, Automotive steels: design, metallurgy, processing and applications, Elsevier/Woodhead Publishing, 2017 [Google Scholar]
  3. B.-A. Behrens, A. Bouguecha, C.M. Gaebel, J. Moritz, J. Schrödter, Hot stamping of load adjusted structural parts, Procedia Eng. 81 (2014) 1756–1761 [CrossRef] [Google Scholar]
  4. K. Mori, P.F. Bariani, B.-A. Behrens, A. Brosius, S. Bruschi, T. Maeno, M. Merklein, J. Yanagimoto, Hot stamping of ultra-high strength steel parts, CIRP Annals 66 (2017) 755–777 [CrossRef] [Google Scholar]
  5. M. Merklein, M. Wieland, M. Lechner, S. Bruschi, A. Ghiotti, Hot stamping of boron steel sheets with tailored properties: a review, J. Mater. Process. Technol. 228 (2016) 11–24 [CrossRef] [Google Scholar]
  6. H. Wang, F. Yan, Z. Chang, A hot‐stamped medium‐mn steel with superior strength–ductility–bendability combination and thin oxidation layer, Steel Res. Int. 95 (2024). https://doi.org/10.1002/srin.202300553 [Google Scholar]
  7. R. Rana, T. Kop, P. Beentjes, E. van der Aa, Low temperature hot press forming of a zinc coated third generation advanced high strength steel, MSF 1105 (2023) 225–230 [Google Scholar]
  8. E. van der Aa, R. Rana, Optimization of hot forming temperature to minimize liquid metal embrittlement induced cracking in resistance spot welded zinc‐coated medium manganese steel, Steel Res. Int. 94 (2023). https://doi.org/10.1002/srin.202300045 [Google Scholar]
  9. R. Rana, C.H. Carson, J.G. Speer, Hot forming response of medium Mn transformation induced plasticity steels, in: Proceedings of 5th International Conference on Hot Sheet Metal Forming of High-Performance Steel (CHS2 2015), 31 May - 3 June 2015, AIST, Toronto, Ontario, Canada, 2015, pp. 391–399 [Google Scholar]
  10. R. Rana, T. Kop, Innovative hot forming of a Zn-coated medium Mn steel, in: Proceedings of the 4th International Conference on Medium and High Manganese Steels (HMnS2019), April 1-3 2019, Aachen, Germany, 2019, pp. 299–302 [Google Scholar]
  11. W. Ding, N. Zhang, G. Zhang, Y. Li, M. Zhang, Microstructure and mechanical properties of medium manganese steel with different aluminum addition after very short time intercritical annealing, J. Mater. Eng. Perform. 33 (2024) 2015–2026 [Google Scholar]
  12. S. Chang, Z. Zhu, X. Huang, J. Zhang, G. Kang, Effect of martensitic transformation on ratchetting in medium-manganese steel: Experiment and homogenized constitutive model, Int. J. Fatigue 181 (2024) 108118 [CrossRef] [Google Scholar]
  13. J. Speer, R. Rana, D. Matlock, A. Glover, G. Thomas, E. de Moor, Processing variants in medium-Mn steels, Metals 9 (2019) 771 [CrossRef] [Google Scholar]
  14. R. Rana, P.J. Gibbs, E. de Moor, J.G. Speer, D.K. Matlock, A composite modeling analysis of the deformation behavior of medium manganese steels, Steel Res. Int. 86 (2015) 1139–1150 [CrossRef] [Google Scholar]
  15. R. Rana, Special issue on ‘Medium manganese steels’, Mater. Sci. Technol. 35 (2019) 2039–2044 [CrossRef] [Google Scholar]
  16. C. Wang, X. Li, S. Han, L. Zhang, Y. Chang, W. Cao, H. Dong, Warm stamping technology of the medium manganese steel, Steel Res. Int. 89 (2018). https://doi.org/10.1002/srin.201700360 [Google Scholar]
  17. Y. Chang, C.Y. Wang, K.M. Zhao, H. Dong, J.W. Yan, An introduction to medium-Mn steel: metallurgy, mechanical properties and warm stamping process, Mater. Des. 94 (2016) 424–432 [CrossRef] [Google Scholar]
  18. S. Ge, Q. Wang, J. Wang, The impact wear-resistance enhancement mechanism of medium manganese steel and its applications in mining machines, Wear 376-377 (2017) 1097–1104 [CrossRef] [Google Scholar]
  19. O.G. Bilir, T. Aycan Başer, A. Karşı, A. Bayram, E. Erişir, Modeling and simulation of hot stamping process for medium manganese steel alloy, Int. J. Mater. Form. 15 (2022). https://doi.org/10.1007/s12289-022-01707-2 [Google Scholar]
  20. G. Zheng, X. Li, Y. Chang, C. Wang, H. Dong, A comparative study on formability of the third-generation automotive medium-Mn steel and 22MnB5 steel, J. Mater. Eng. Perform. 27 (2018) 530–540 [Google Scholar]
  21. J. Lechler, M. Merklein, M. Geiger, Determination of thermal and mechanical material properties of ultra-high strength steels for hot stamping, Steel Res. Int. 79 (2008) 98–104 [CrossRef] [Google Scholar]
  22. C. Tong, Q. Rong, V.A. Yardley, Z. Shi, X. Li, B. Zhang, D. Xu, J. Lin, Investigation of deformation behaviour with yield point phenomenon in cold-rolled medium-Mn steel under hot stamping conditions, J. Mater. Process. Technol. 306 (2022) 117623 [CrossRef] [Google Scholar]
  23. B. Yin, Y. Han, W. Wang, H. Li, Y. Liu, X. Ran, Flow characteristics of a medium–high carbon Mn-Si-Cr alloyed steel at high temperatures, J. Mater. Eng. Perform. 28 (2019) 5104–5115 [Google Scholar]
  24. N. Yan, H.-S. Di, H.-Q. Huang, R.D.K. Misra, Y.-G. Deng, Hot deformation behavior and processing maps of a medium manganese TRIP steel, Acta Metall. Sin. (Engl. Lett.) 32 (2019) 1021–1031 [Google Scholar]
  25. Z. Li, R. Zhang, C. Luo, S. Du, H. Qi, W. Yang, The effect of the heating process on the warm deformation behavior and microstructure of medium Mn steel, Steel Res. Int. 96 (2025) 114–122 [Google Scholar]
  26. Y. Xu, P. Birnbaum, S. Pilz, X. Zhuang, Z. Zhao, V. Kräusel, Investigation of constitutive relationship and dynamic recrystallization behavior of 22MnB5 during hot deformation, Results Phys. 14 (2019) 102426 [Google Scholar]
  27. Q. Zhou, P. Guo, F. Qin, Stress response behavior, microstructure evolution and constitutive modeling of 22MnB5 boron steel under isothermal tensile load, Metals 12 (2022) 930 [Google Scholar]
  28. P. Althaus, R. Rana, H. Wester, J. Uhe, B.-A. Behrens, Characterisation and modelling of the flow behaviour of a medium manganese steel for hot forming, MATEC Web Conf. 408 (2025) 1058 [Google Scholar]
  29. B.-A. Behrens, D. Rosenbusch, H. Wester, E. Stockburger, Material characterization and modeling for finite element simulation of press hardening with AISI 420C, J. Mater. Eng. Perform. 31 (2022) 825–832 [Google Scholar]
  30. B.-A. Behrens, A. Bouguecha, M. Kammler, J. Schrödter, T. Hadifi, T. Götze, Assessment of a modified tensile specimen geometry for the characterization of 22MnB5 with a quenching and deformation dilatometer, in: Proceedings of IDDRG 2012, 25 - 29 November 2012, Bombay, India, 2012 [Google Scholar]
  31. P. Samadian, A. Abedini, C. Butcher, M.J. Worswick, Microstructure-based modelling of flow and fracture behavior of tailored microstructures of Ductibor® 1000-AS steel, Metals 12 (2022) 1770 [Google Scholar]
  32. G.R. Johnson, W.H. Cook, A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures, in: Proceedings of the 7th International Symposium on Ballistics, The Hague, The Netherlands (April 1983), 1983, pp. 541–547 [Google Scholar]
  33. H. Ji, Y. Wen, G. Cui, W. Pei, W. Xiao, Hot-deformation behavior and processing map of 22MnB5 high-strength steel, Mater. Tehnol. 57 (2023). https://doi.org/10.17222/mit.2023.874 [Google Scholar]
  34. A. Hensel, T. Spittel, Kraft- und Arbeitsbedarf bildsamer Formgebungsverfahren, VEB Deutscher Verlag für Grundstoffindustrie, 1978 [Google Scholar]
  35. L. Niu, Q. Zhang, B. Wang, B. Han, H. Li, T. Mei, A modified Hansel-Spittel constitutive equation of Ti-6Al-4V during cogging process, J. Alloys Compd. 894 (2022) 162387 [Google Scholar]
  36. B.T. Tang, S. Bruschi, A. Ghiotti, P.F. Bariani, An improved damage evolution model to predict fracture of steel sheet at elevated temperature, J. Mater. Process. Technol. 228 (2016) 76–87 [CrossRef] [Google Scholar]
  37. N.J. Hoff, Approximate analysis of structures in the presence of moderately large creep deformations, Quart. Appl. Math. 12 (1954) 49–55 [CrossRef] [Google Scholar]
  38. M. Merklein, J. Lechler, Determination of material and process characteristics for hot stamping processes of quenchenable ultra high strength steels with respect to a FE-based process design, SAE Int. J. Mater. Manf. 1 (2009) 411–426 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.