Open Access
Issue
Manufacturing Rev.
Volume 7, 2020
Article Number 36
Number of page(s) 13
DOI https://doi.org/10.1051/mfreview/2020033
Published online 20 October 2020
  1. J. Jeswiet, M. Geiger, U. Engel, M. Kleiner, M. Schikorra, J. Duflou, R. Neugebauer, P. Bariani, S. Bruschi, Metal forming progress since 2000, CIRP J. Manufactur. Sci. Technol. 11 (2008) 2–17 [CrossRef] [Google Scholar]
  2. A.E. Tekkaya, N.B. Khalifa, G. Grzancic, R. Hölker, Forming of lightweight metal components: need for new technologies, Proc. Eng. 81 (2014) 28–37 [CrossRef] [Google Scholar]
  3. M. Merklein, H. Hagenah, T. Schneider, Sheet-bulk metal forming processes − state of the art and its perspective, in Science Meets Industry, TTP, Tools and Technologies for Processing Ultra High Strength Materials, 2013, Verlag der Technischen Universität, Graz, 2013, 197–204 [Google Scholar]
  4. M. Merklein, J.M. Allwood, B.A. Behrens, A. Brosius, H. Hagenah, K. Kuzman, K. Mori, A.E. Tekkaya, A. Weckenmann, Bulk forming of sheet metal, CIRP Ann. Manufactur. Technol. 61 (2012) 725–745 [CrossRef] [Google Scholar]
  5. K. Mori, T. Nakano, State-of-the-art of plate forging in Japan, Product. Eng. 10 (2016) 81–91 [CrossRef] [Google Scholar]
  6. T. Nakano, Introduction of flow control forming (FCF) for sheet forging and new presses, in Proceedings of the International Seminar on Precision Forging, Kyoto, 2009 [Google Scholar]
  7. Y. Oyachi, J.M. Allwood, Characterizing the class of local metal sheet thickening processes, in 10th ICTP-International Conference on Technology of Plasticity, Düsseldorf: Steel Research International, 2011, 1025–1030 [Google Scholar]
  8. X.-L. Sun, X.-C. Zhuang, F.-C. Yang, Z. Zhao, Reduction of die roll height in duplex gears through a sheet-bulk metal forming method, Adv. Manufactur. 7 (2019) 42–51 [CrossRef] [Google Scholar]
  9. X. Zhuang, X. Sun, H. Xiang, M. Xia, Z. Zhao, Compound deep drawing and extrusion process for the manufacture of geared drum, Int. J. Adv. Manufactur. Technol. 84 (2015) 2331–2345 [CrossRef] [Google Scholar]
  10. Z.G. Wang, K. Hirasawa, Y. Yoshikawa, K. Osakada, Forming of light-weight gear wheel by plate forging, CIRP Ann. 65 (2016) 293–296 [CrossRef] [Google Scholar]
  11. F. Pilz, J. Henneberg, M. Merklein, Extension of the forming limits of extrusion processes in sheet-bulk metal forming for production of minute functional elements, Manufactur. Rev. 7 (2020) 1–12 [CrossRef] [Google Scholar]
  12. S. Haage, M. Straub, A. Birkert, Umformtechnische Herstellung komplexer Karosserieteile − Auslegung von Ziehanlagen (Springer-Verlag, Berlin, 2013), 1 [Google Scholar]
  13. B.T. Cheok, A.Y.C. Nee, Configuration of progressive dies, Artif. Intell. Eng. Des. Anal. Manufactur. 12 (1998) 405–418 [CrossRef] [Google Scholar]
  14. K. Hayashi, Tool engineering for fineblanking and sheet metal forging complex work, J. Jpn. Soc. Technol. Plasticity 47 (2006) 554 [CrossRef] [Google Scholar]
  15. L. Tajul, T. Maeno, K.-I. Mori, Successive forging of long plate having inclined cross-section, Proc. Eng. 81 (2014) 2361–2366 [CrossRef] [Google Scholar]
  16. International Cold Forging Group ICFG, General recommondations for design, manufacture and operational aspects of cold extrusion tools for steel components, in International Cold Forging Group 1967-1992 − Objectives, History Published Documents (Meisenbach, Bambergm 1992), pp. 33–58 [Google Scholar]
  17. M. Merklein, A.E. Tekkaya, A. Brosius, S. Opel, J. Koch, Overview on sheet-bulk metal forming processes, in Proceedings ICTP., edited by G. Hirt, A.E. Tekkaya (Wiley-VCH, 2011) 1109–1114 [Google Scholar]
  18. W. Dong, C. Zhang, Q. Lin, Z. Wang, Investigation on dimple defect mechanism in solid boss forming process by plate forging, in International Conference on the Technology of Plasticity, Elsevier, 2017, 1159–1164 [Google Scholar]
  19. Z.G. Wang, Y. Yoshikawa, K. Osakada, A new forming method of solid bosses on a cup made by deep drawing, CIRP Ann. Manufactur. Technol. 62 (2013) 291–294 [CrossRef] [Google Scholar]
  20. X.-C. Zhuang, H. Xiang, Z. Zhao, Analysis of sheet metal extrusion process using finite element method, Int. J. Autom. Comput 7 (2010) 295–302 [CrossRef] [Google Scholar]
  21. S. Schlagau, W. Tobler, Stand und Entwicklungstendenzen der Feinschneidtechnik, Materialwissenschaft und Werkstofftechnik 31 (2000) 972–978 [CrossRef] [Google Scholar]
  22. H. Vierzigmann, Beitrag zur Untersuchung der tribologischen Bedingungen in der Blechmassivumformung − Bereitstellung von Modellversuchen und Realisierung von Tailored Surfaces, PhD-Thesis, FAU, 2015 [Google Scholar]
  23. D. Gröbel, R. Schulte, P. Hildenbrand, M. Lechner, U. Engel, P. Sieczkarek, S. Wernicke, S. Gies, A.E. Tekkaya, B.A. Behrens, S. Hübner, M. Vucetic, S. Koch, M. Merklein, Manufacturing of functional elements by sheet-bulk metal forming processes, Product. Eng. 10 (2016) 63–80 [CrossRef] [Google Scholar]
  24. A.E. Tekkaya, A guide for validation of FE-simulations in bulk metal forming, Arab. J. Sci. Eng. 30 (2005) 113–136 [Google Scholar]
  25. D. Gröbel, Herstellung von Nebenformelementen unterschiedlicher Geometrie an Blechen mittels Fließpressverfahren der Blechmassivumformung. PhD-Thesis, FAU, 2018 [Google Scholar]
  26. DIN Deutsches Institut für Normung e.V., DIN 50106–Prüfung metallischer Werkstoffe − Druckversuch bei Raumtemperatur (Beuth-Verlag, Berlin, 2016) [Google Scholar]
  27. J.E. Hockett, O.D. Sherby, Large strain deformation of polycrystalline metal at low homologous temperatures, J. Mech. Phys. Solids 23 (1975) [Google Scholar]
  28. A.E. Tekkaya, P.A.F. Martins, Accuracy, reliability and validity of finite element analysis in metal forming: a user's perspective, Int. J. Comput. Aided Eng. Softw. 26 (2008) 1026–1055 [CrossRef] [Google Scholar]
  29. DIN Deutsches Institut für Normung e.V., DIN EN ISO 14577-1:2015-11: Metallische Werkstoffe − Instrumentierte Eindringprüfung zur Bestimmung der Härte und anderer Werkstoffparameter − Teil 1: Prüfverfahren (Beuth-Verlag, Berlin, 2015) [Google Scholar]
  30. M.P. Groover, Fundamentals of modern manufacturing: materials processes, and systems (John Wiley & Sons, 2007) [Google Scholar]
  31. M. Löffler, K. Andreas, U. Engel, R. Schulte, D. Groebel, E. Krebs, D. Freiburg, D. Biermann, D. Stangier, W. Tillmann, T. Weikert, S. Wartzack, S. Tremmel, H. Lucas, B. Denkena, M. Merklein, Tribological measures for control-ling material flow in sheet-bulk metal forming, Product. Eng. 10 (2016) 459–470 [CrossRef] [Google Scholar]
  32. T. Maeno, K. Mori, A. Hori, Application of load pulsation using servo press to plate forging of stainless steel parts, J. Mater. Process. Technol. 214 (2014) 1379–1387 [CrossRef] [Google Scholar]
  33. J. Henneberg, H. Lucas, B. Denkena, M. Merklein, Investigation on the tribological behavior of tool-sided tailored surfaces for controlling the material flow in sheet-bulk metal forming, in Proceedings of the 22nd International ESAFORM Conference on Material Forming, 2019 [Google Scholar]
  34. D. Freiburg, R. Aßmuth, G.R. Carballo, D. Biermann, J. Henneberg, M. Merklein, Adaption of tool surface for sheet-bulk metal forming by means of pressurized air wet abrasive jet machining, Product. Eng. 13 (2018) 71–77 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.