EDP Sciences logo
Submit your paper
Search
Menu
Home All issues Volume 9 (2022) Manufacturing Rev., 9 (2022) 24 References
Open Access
Issue
Manufacturing Rev.
Volume 9, 2022
Article Number 24
Number of page(s) 12
DOI https://doi.org/10.1051/mfreview/2022021
Published online 17 August 2022
  1. M. Rosso, Ceramic and metal matrix composites: routes and properties, J. Mater. Process. Technol. 175 (2006) 364–375 [CrossRef] [Google Scholar]
  2. C.S. Ramesh, A.R. Anwar Khan, N. Ravikumar, P. Savanprabhu, Prediction of wear coefficient of Al6061-TiO2 composites, Wear 59 (2005) 602–608 [CrossRef] [Google Scholar]
  3. C.S. Ramesh, A. Ahamed, B.H. Channabasappa, R. Keshavamurthy, Development of Al 6063-TiB2 in situ composites, Mater. Des. 31 (2010) 2230–2236 [CrossRef] [Google Scholar]
  4. S.K. Jagadeesh, C.S. Ramesh, J.M. Mallikarjuna, R. Keshavamurthy, Prediction of cooling curves during solidification of Al 6061-SiCp based metal matrix composites using finite element analysis, J. Mater. Process. Technol. 210 (2010) 618–623 [CrossRef] [Google Scholar]
  5. A. Moutsatsou, G. Itskos, P. Vounatsos, N. Koukouzas, C. Vasilatos, Microstructural characterization of PM-Al and PM-Al/Si composites reinforced with lignite fly ash, Mater. Sci. Eng. A 527 (2010) 4788–4795 [CrossRef] [Google Scholar]
  6. R.K. Uyyuru, M.K. Surappa, S. Brusethaug, Effect of reinforcement volume fraction and size distribution on the tribological behavior of Al-composite/brake pad tribo-couple, Wear 260 (2006) 1248–1255 [Google Scholar]
  7. B.G. Park, A.G. Crosky, A.K. Hellier, High cycle fatigue behaviour of microsphere Al2O3-Al particulate metal matrix composites, Composites: Part B 39 (2008) 1257–1269 [CrossRef] [Google Scholar]
  8. C.S. Ramesh, M. Safiulla, Wear behavior of hot extruded Al6061 based composites, Wear 263 (2007) 629–635 [CrossRef] [Google Scholar]
  9. B. Cantor, F. Dunne, I. Stone, Metal and ceramic matrix composites (IOP Publishing Ltd., 2004) [CrossRef] [Google Scholar]
  10. H.M. Mahendra, G.S. Prakash, K.S.K. Rajanna, Mechanical properties of Al6061-Al2O3 metal matrix composite using die casting technique, J. Mater. Sci. Metall. 1 (2018) 102 [Google Scholar]
  11. A. Baradeswaran, A.E. Perumal, Study on mechanical and wear properties of Al 7075/Al2O3/graphite hybrid composites, Compos. Part B: Eng. 56 (2014) 464–471 [CrossRef] [Google Scholar]
  12. R. Harichandran, N. Selvakumar, Microstructure and mechanical characterization of (B4C+ h-BN)/Al hybrid nanocomposites processed by ultrasound assisted casting, Int. J. Mech Sci. 144 (2018) 814–826 [CrossRef] [Google Scholar]
  13. Dry sliding friction of Al-based composites reinforced with various boron-containing particles, J. Alloys Compd. 536 (2012) S126 –S129 [CrossRef] [Google Scholar]
  14. K.L. Firestein, A.E. Steinman, I.S. Golovin, J. Cifre, E.A. Obraztsova, A.T. Matveev, A.M. Kovalskii, O.I. Lebedev, D.V. Shtansky, D. Golberg, Fabrication, characterization, and mechanical properties of spark plasma sintered Al-BN nanoparticle composites, Mater. Sci. Eng. 642 (2015) 104–112 [CrossRef] [Google Scholar]
  15. S. Mahathanabodee, T. Palathai, S. Raadnui, R. Tongsri, N. Sombatsompop, Effects of hexagonal boron nitride and sintering temperature on mechanical and tribological properties of SS316L/h-BN composites, Mater. Des. 46 (2013) 588–597 [CrossRef] [Google Scholar]
  16. L. Song, L. Ci, H. Lu, P.B. Sorokin, C. Jin, J. Ni et al., Large scale growth and characterization of atomic hexagonal boron nitride layers, Nano Lett. 10 (2010) 3209–3215 [CrossRef] [Google Scholar]
  17. K. Yathiraj, M.T. Chandraiah, A.R. Mohan Kumar, Evaluation of mechanical properties of aluminium 6061 reinforced with boron nitride MMCs using OM, IJIRSET 5 (2016) 16128–16133 [Google Scholar]
  18. Y.M. Shivaprakash, B.M. Gurumurthy, M.A. Siddhartha, N.M. Siddesh Kumar, A. Dutta, Studies on mild steel particulates reinforced duralumin composite fabricated through powder metallurgy route, IJMPERD 9 (2019) 903–920 [CrossRef] [Google Scholar]
  19. A. Gaurav, A. Patnaik, R.K. Sharma, Parametric optimization and three-body abrasive wear behavior of sic filled chopped glass fiber reinforced epoxy composites. International Journal of Composite Materials 3.2 (2013) 32–38 [Google Scholar]
  20. L.A. Dobrzanski, A. Włodarczyk, M. Adamiak, The structure and properties of PM composite materials based on EN AW-2124 aluminum alloy reinforced with the B4N or Al2O3 ceramic particles, J. Mater. Process. Technol. 175 (2006) 186–191 [CrossRef] [Google Scholar]
  21. R. Dasgupta, H. Meenai, SiC particulate dispersed composites of an Al-Zn-Mg-Cu alloy: property comparison with parent alloy, Mater. Char. 54 (2005) 438–445 [CrossRef] [Google Scholar]
  22. S. Corthay, K.L. Firestein, D.G. Kvashnin, M.K. Kutzhanov, A.T. Matveev, A.M. Kovalskii, D.V. Leybo, D.V. Golberg, D.V. Shtansky, Elevated-temperature high-strength h-BN-doped Al2014 and Al7075 composites: experimental and theoretical insights, Mater. Sci. Eng. A 809 (2021) 140969 [CrossRef] [Google Scholar]
  23. N. Kaushik, P. Kumar, J. Ghose, S.K. Jha, Study of mechanical properties of Al2014-B4C-Gr hybrid nano composite, Mater. Today Proc. 33 (2020) 5573–5576 [CrossRef] [Google Scholar]
  24. C. Nikhilesh, S. Yu-Lin, Mechanical behaviour of particle reinforced metal matrix composites, Adv. Eng. Mater. 3 (2001) 357–370 [CrossRef] [Google Scholar]
  25. V.V. Ravikumar, S. Kumaran, Tensile and wear behaviour of precipitation hardened AA7xxxx alloy, Indian J. Eng. Mater. Sci. 26 (2019) 161–167 [Google Scholar]
  26. G. Miranda, M. Buciumeanu, S. Madeira, O. Carvalho, D. Soares, F.S. Silva, Hybrid composites-metallic and ceramic reinforcements influence on mechanical and wear behavior, Compos. Part B 74 (2015) 153–165 [CrossRef] [Google Scholar]
  27. V.C. Uvaraja, N. Nanjappan, Tribological behaviour of heat treated Al 7075 aluminium metal matrix composites, Indian J. Eng. Mater. Sci. 22 (2015) 51–61 [Google Scholar]
  28. Y.M. Shivaprakash, H.C. Ramu, R. Kumar, D. Kumar, Experimental studies on Al (5.7% Zn) alloy based hybrid MMC, IOP Conf. Ser.: Mater. Sci. Eng. 310 (2018) 012004 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.