Open Access
Manufacturing Rev.
Volume 9, 2022
Article Number 16
Number of page(s) 14
Published online 01 July 2022
  1. Y.L. Deng, C.M. Li, J. Zhang, J.H. Zhao, Effect of aging process on microstructure and mechanical properties of 7050 aluminum alloy for rail transportation, Chin. J. Nonferrous Metals 28 (2018) 1711–1719 [Google Scholar]
  2. T.K. Wu, F.Q. Zhao, H.T. Luo, H.N. Wang, Y.X. Li, Temperature monitoring and material flow characteristics of friction stir welded 2A14-t6 aerospace aluminum alloy, Materials 12 (2019) 3387–3405 [CrossRef] [Google Scholar]
  3. Y.N. Dai, X.T. Zheng, X.B. Chen, J.Y. Yu, A prediction model of milling force for aviation 7050 aluminum alloy based on improved RBF neural network, Int. J. Adv. Manufactur. Technol. 110 (2020) 2493–2501 [CrossRef] [Google Scholar]
  4. M.S. Mohamed, A.D. Foster, J.G. Lin, D.S. Balint, T.A. Dean, Investigation of deformation and failure features in hot stamping of A A6082: experimentation and modelling, Int. J. Mach. Tools Manuf. 53 (2012) 27–38 [CrossRef] [Google Scholar]
  5. R. Neugebauer, T. Altan, M. Geiger, M. Kleiner, A. Sterzing, Sheet metal forming at elevated temperatures, CIRP Ann-Manuf. Technol. 55 (2006) 799–816 [Google Scholar]
  6. L. Wang, M. Strangwood, D. Balint, J. Lin, T.A. Dean, Formability and failure mechanisms of AA2024 under hot forming conditions, Mater. Sci. Eng. A 528 (2011) 2648–2656 [CrossRef] [Google Scholar]
  7. S.K. Hong, M. Ko, Numerical investigations on springback characteristics of aluminum sheet metal alloys in warm forming conditions, J. Mater. Process. Technol. 204 (2008) 370–383 [CrossRef] [Google Scholar]
  8. W.P. Ma, B.Y. Wang, W.C. Xiao, X.M. Yang, Y. Kang, Springback analysis of 6016 aluminum alloy sheet in hot V-shape stamping, J. Central South Univ. 26 (2019) 524–535 [CrossRef] [Google Scholar]
  9. P.F. Bariani, S. Bruschi, A. Ghiotti, F. Michieletto, Hot stamping of AA5083 aluminum alloy sheets, CIRP Ann- Manuf. Technol. 62 (2013) 251–254 [CrossRef] [Google Scholar]
  10. X.B. Fan, Z.B. He, S.J. Yuan, K.L. Zheng, Experimental investigation on hot forming-quenching integrated process of 6A02 aluminum alloy sheet, Mater. Sci. Eng. A 573 (2013) 154–160 [CrossRef] [Google Scholar]
  11. X.B. Fan, Z.B. He, K.L. Zheng, S.J. Yuan, Strengthening behavior of Al-Cu-Mg alloy sheet in hot forming-quenching integrated process with cold-hot dies, Mater. Des. 83 (2015) 557–565 [CrossRef] [Google Scholar]
  12. G.L. Chen, M.H. Chen, N. Wang, J.W. Sun, Hot forming process with synchronous cooling for AA2024 aluminum alloy and its application, Int. J. Adv. Manufactur. Technol. 86 (2016) 133–139 [CrossRef] [Google Scholar]
  13. L.J. Zhu, Z.X. Liu, Z.Q. Zhang, Investigation on strengthening of 7075 aluminum alloy sheet in a new hot stamping process with pre-cooling, Int. J. Adv. Manufactur. Technol. 103 (2019) 4739–4746 [CrossRef] [Google Scholar]
  14. R.Y. Gu, Q. Liu, S.C. Chen, W.R. Wang, X.C. Wei, Study on high-temperature mechanical properties and forming limit diagram of 7075 aluminum alloy sheet in hot stamping, J. Mater. Eng. Perform. 28 (2019) 7259–7272 [CrossRef] [Google Scholar]
  15. Y. Liu, B. Zhu, Y.L. Wang, S.Q. Li, Y.S. Zhang, Fast solution heat treatment of high strength aluminum alloy sheets in radiant heating furnace during hot stamping, Int. J. Lightweight Mater. Manufact. 3 (2020) 20–25 [Google Scholar]
  16. Y. Liu, B. Zhu, K. Wang, S.Q. Li, Y.S. Zhang, Friction behaviors of 6061 aluminum alloy sheets in hot stamping under dry and lubricated conditions based on hot strip drawing test, Tribol. Int. 151 (2020) 1–12 [Google Scholar]
  17. K. Mori, S. Nishijima, C.J. Tan, Two-stage cold stamping of magnesium alloy cups having small corner radius, Int. J. Mach. Tools Manuf. 49 (2009) 767–772 [Google Scholar]
  18. H.C. Wu, T. Altan, Process optimization in stamping-a case study for flanging a clutch hub from steel plate, J. Mater. Process. Technol. 146 (2004) 8–19 [CrossRef] [Google Scholar]
  19. X.Y. Wang, W.T. Luo, J.C. Xia, G.A. Hu, Investigation of warm stamping forging process for car flywheel panel, Forging Stamp. Technol. 34 (2009) 33–36 (in Chinese) [Google Scholar]
  20. X.Y. Wang, M.L. Guo, J.C. Luo, K. Ouyang, J.C. Xia, Stamping-forging hybrid forming of double layer cup with different wall thicknesses, Mater. Res. Innov. 15 (2011) s435–s438 [CrossRef] [Google Scholar]
  21. X.Y. Wang, J.S. Jin, L. Deng, Review: state of the art of stamping-forging process with sheet metal blank, J. Harbin Inst. Technol. 24 (2017) 1–16 [Google Scholar]
  22. C.J. Tan, K. Mori, Y. Abe, Forming of tailor blanks having local thickening for control of wall thickness of stamped products, J. Mater. Process. Technol. 202 (2008) 443–449 [CrossRef] [Google Scholar]
  23. K. Mori, Y. Abe, K. Osakada, S. Hiramatsu, Plate forging of tailored blanks having local thickening for deep drawing of rectangular cups, J. Mater. Process. Technol. 211 (2011) 1569–1574 [CrossRef] [Google Scholar]
  24. X.Y. Wang, J.B. Li, L. Deng, Metal flow control during hot forming of square cups with local-thickened plates and varied friction conditions, J. Mater. Process. Technol. 253 (2018) 195–203 [CrossRef] [Google Scholar]
  25. J.B. Li, X.H. Chen, X.L. Liu, Investigation of process parameters and plate local thickening on residual stresses in hot stamping process, Mech. Ind. 22 (2021) 1–12 [CrossRef] [EDP Sciences] [Google Scholar]
  26. J.B. Li, L. Deng, X.Y. Wang, J.S. Jin, Research on residual stresses during hot stamping with flat and locally-thickened plates, Int. J. Adv. Manufactur. Technol. 92 (2017) 2987–2999 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.