EDP Sciences logo
Submit your paper
Search
Menu
Home All issues Volume 9 (2022) Manufacturing Rev., 9 (2022) 34 References
Open Access
Issue
Manufacturing Rev.
Volume 9, 2022
Article Number 34
Number of page(s) 13
DOI https://doi.org/10.1051/mfreview/2022032
Published online 25 November 2022
  1. S. Kumar, S. Kumar, A. Kumar, Optimization of process parameters for friction stir welding of joining A6061 and A6082 alloys by Taguchi method, J. Mech. Eng. Sci. 227 (2012) 1150–1163 [Google Scholar]
  2. P. Sharma, S. Baskar, P. Joshi, T.A. Raja, S. Kumar Sahu, M. Sreenivasa Reddy, M. Rudra Naik, Optimization of process parameter on AA8052 Friction stir welding using Taguchi's method, Adv. Mater. Sci. Eng. 14 (2022) 1–8 [Google Scholar]
  3. K.S. Ali, V. Mohanavel, S.A. Vendan, M. Ravichandran, A. Yadav, M. Gucwa, J. Winczek, Mechanical and microstructural characterization of friction stir welded SiC and B4C reinforced aluminium alloy AA6061 metal matrix composites, Materials 14 (2021) 3110 [CrossRef] [Google Scholar]
  4. K. Boulahem, S. Ben Salem, J. Bessrour, Prediction model of ultimate tensile strength and investigation on microstructural characterization of friction stir welded AA2024- T3, Int. J. Adv. Manufactur. Technol. (2017) https://doi.org/10.1007/s00170-017-1215-z. [Google Scholar]
  5. M. Nourani, A.S. Milani, S. Yannacopoulos, Taguchi optimization of process parameters in friction stir welding of 6061 aluminum alloy: a review and case study, Sci. Res. 3 (2011) 144–155 [Google Scholar]
  6. K.S. Arora, S. Pandey, M. Schaper, R. Kumar, Effect of process parameters on friction stir welding of aluminum alloy 2219-T87, Int. J. Adv. Manufactur. Technol. 50 (2010) 941–952 [CrossRef] [Google Scholar]
  7. D. Ahmadkhaniha, M.H. Sohi, A. Zarei-Hanzaki, S.M. Bayazid, M. Saba, Taguchi optimization of process parameters in friction stir processing of pure Mg, J. Magn. Alloys 3 (2015) 168–72 [CrossRef] [Google Scholar]
  8. A. Heidarzadeh, T. Saeid, Prediction of mechanical properties in friction stir welds of pure copper, Mater. Des. (1980–2015) 52 (2013) 1077–1087 [CrossRef] [Google Scholar]
  9. U. Singarapu, K. Adepu, S.R. Arumalle, Influence of tool material and rotational speed on mechanical properties of friction stir welded AZ31B magnesium alloy, J Magn. Alloys 3 (2015) 335–344 [CrossRef] [Google Scholar]
  10. C.V. Rao, G.M. Reddy, K.S. Rao, Influence of tool pin profile on microstructure and corrosion behavior of AA2219 Al-Cu alloy friction stir weld nuggets, Defense Technol. 11 (2015) 197–208 [CrossRef] [Google Scholar]
  11. R. Kadaganchi, M.R. Gankidi, H. Gokhale, Optimization of process parameters of aluminum alloy AA 2014-T6 friction stir welds by response surface methodology, Defense Technol. 11 (2015) 209–219 [CrossRef] [Google Scholar]
  12. H. Doude, J. Schneider, B. Patton, S. Stafford, T. Waters, C. Varner, Optimizing weld quality of a friction stir welded aluminum alloy, J. Mater. Process. Technol. 222 (2015) 188–196 [CrossRef] [Google Scholar]
  13. K. Kalaiselvan, N. Murugan, Optimizations of friction stir welding process parameters for the welding of Al-B4C composite plates using generalized reduced gradient method, Proc. Eng. 38 (2012) 49–55 [CrossRef] [Google Scholar]
  14. I. Dinaharan, N. Murugan, Effect of friction stir welding on microstructure, mechanical and wear properties of AA6061/ZrB2 in situ cast composites, Mater. Sci. Eng. A 543 (2012) 257–266 [CrossRef] [Google Scholar]
  15. N. Murugan, B.A. Kumar, Prediction of tensile strength of friction stir welded stir cast AA6061-T6/AlNp composite, Mater. Des. 51 (2013) 998–1007 [CrossRef] [Google Scholar]
  16. S.J. Vijay, N. Murugan, Influence of tool pin profile on the metallurgical and mechanical properties of friction stir welded Al-10 wt.% TiB2 metal matrix composite, Mater. Des. 31 (2010) 3585–3589 [CrossRef] [Google Scholar]
  17. B.A. Kumar, N. Murugan, Optimization of friction stir welding process parameters to maximize tensile strength of stir cast AA6061-T6/AlNp composite, Mater. Des. 57 (2014) 383–393 [CrossRef] [Google Scholar]
  18. B.N. Venkatesha, M.S. Bhagyashekar, Influence of friction stir welding process parameters on mechanical properties of AA6061-9 wt.% SiC composites, in Advances in Lightweight Materials and Structures 2020. Springer, Singapore (2020) pp. 683–693 [CrossRef] [Google Scholar]
  19. P. Sivaiah, D. Chakradhar, Modeling and optimization of sustainable manufacturing process in machining of 17-4 PH stainless steel, Measurement 134 (2019) 142–152 [CrossRef] [Google Scholar]
  20. D.P. Florence, P.S. Sai, S. Devaraj, K.S. Narayanaswamy, A review on effect of processing parameters on mechanical properties of MMCs by friction stir process, in InAIP Conference Proceedings 2317 (2021) 020040 [Google Scholar]
  21. K. Ramesha, P.D. Sudersanan, N. Santhosh, S. Jangam, Design and optimization of the process parameters for friction stir welding of dissimilar aluminium alloys, Eng. Appl. Sci. Res. 48 (2021) 257–267 [Google Scholar]
  22. A.D. D'Souza, S.S. Rao, M.A. Herbert, Taguchi method of optimization of process variables for ultimate tensile strength of friction stir welded joint of Al-Cu-Si-Mg aluminum alloy plates, Mater. Today: Proc. (2021) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.