Open Access
Issue
Manufacturing Rev.
Volume 9, 2022
Article Number 31
Number of page(s) 10
DOI https://doi.org/10.1051/mfreview/2022029
Published online 18 October 2022
  1. P.R. jadhav, B.R. Sridhar, M. Nagaral, J.I. Harti, Mechanical behavior and fractography of graphite and boron carbide particulates reinforced A356 alloy hybrid metal matrix composites, Adv. Compos. Hybrid Mater. 3 (2020) 114–119 [CrossRef] [Google Scholar]
  2. P.H. Nayak, H.K. Srinivas, M. Nagaral, Characterization of tensile fractography of nano ZrO2 reinforced copper-zinc alloy composites, Frattura ed Integrity Strutturale (Fracture and Structural Integrity) 48 (2019) 370–376 [Google Scholar]
  3. M. Nagaral, S. Kalgudi, V. Auradi, S. Kori, Mechanical characterization of ceramic nano B4C-Al2618 alloy composites synthesized by semi solid processing, Trans. Indian Ceram. Soc. 77 (2018) 1–4 [Google Scholar]
  4. N.G. Siddesh Kumar, G.S. Shivashankar, S. Basavarajappa, R. Suresh, Some studies on mechanical and machining characteristics of Al2219/n-B4C/MoS2 nano hybrid metal matrix composites, Measurement 107 (2017) 1–11 [CrossRef] [Google Scholar]
  5. C.S. Ramesh, R. Noor Ahmed, M.A. Mujeebu, M.Z. Abdullah, Development and performance analysis of novel cast copper SiC-Gr hybrid composite, Mater. Des. 30 (2009) 1957–1965 [CrossRef] [Google Scholar]
  6. V. Bharath, M. Nagaral, V. Auradi, Preparation, characterization and mechanical properties of Al2O3 reinforced 6061 Al particulate MMCs, Int. J. Eng. Res. Technol. 1 (2012) 1–6 [CrossRef] [Google Scholar]
  7. V. Hiremath, S.T. Dundur, R.L. Bharath, G.L. Rajesh, V. Auradi, Studies on mechanical and machinability properties of B4C reinforced 6061 aluminium MMC produced via melt stirring, Appl. Mech. Mater. 592 (2014) 744–748 [CrossRef] [Google Scholar]
  8. M. Nagaral, V. Auradi, K.I. Parashivamurthy, S.A. Kori, B.K. Shivananda, Synthesis and characterization of Al6061-SiC-Graphite composites fabricated by liquid metallurgy, Mater. Toady Proc. 5 (2018) 2836–2843 [Google Scholar]
  9. M. Nagaral, V. Auradi, V. Bharath, S. Patil, M.S. Tattimani, Effect of micro graphite particles on the microstructure and mechanical behavior of aluminium 6061 (Al-Mg-Si) alloy composites developed by novel two step casting technique, J. Metals Mater. Minerals 31 (2021) 38–45 [CrossRef] [Google Scholar]
  10. V. Bharath, V. Auradi, M. Nagaral, S.B. Boppana, S. Ramesh, K. Palanikumar, Microstructural and wear behavior of Al2014-alumina composites with varying alumina content, Trans. Indian Inst. Metals 75 (2022) 133–147 [CrossRef] [Google Scholar]
  11. H.S. Kumar, U.N. Kempaiah, M. Nagaral, V. Auradi, Impact, tensile and fatigue failure analysis of boron carbide particles reinforced Al-Mg-Si (Al6061) alloy composites, J. Failure Anal. Prevent. 21 (2021) 2177–2189 [CrossRef] [Google Scholar]
  12. R.A. Chennakesava, Tensile fracture behaviors of 7072/SiCp metal matrix composites fabricated by gravity die casting process, Mater. Technol. 26 (2011) 257 [Google Scholar]
  13. R.M. Wang, M.K. Surappa, C.H. Tao, C.Z. Li, M.G. Yan, Microstructure and interface structure studies of SiC reinforced Al6061 metal matrix composites, Mater. Sci. Eng. A 254 (1998) 219–226 [CrossRef] [Google Scholar]
  14. S.A. Sajjadi, M. Torabi Parizi, H.R. Ezatpour, A. Sedghi, Fabrication of A356 composite reinforced with micro and nano Al2O3 particles by a developed compo-casting method and study of its properties, J. Alloys Compd. 511 (2014) 226–231 [Google Scholar]
  15. G.L. Chandrasekhar, Y. Vijayakumar, M. Nagaral, C. Anilkumar, Microstructural evaluation and mechanical behaviour of nano B4C reinforced Al7475 alloy metal composites, Int. J. Vehicle Struct. Syst. 13 (2021) 673–677 [Google Scholar]
  16. M. Nagaral, V. Auradi, S.A. Kori, H.N. Reddappa, Jayachandran, V. Shivaprasad, Studies on 3 and 9 wt.% of B4C particulates reinforced Al7025 alloy composites, AIP Conf. Proc. 1859 (2017) 020019 [CrossRef] [Google Scholar]
  17. D. Patidar, R.S. Rana, Effect of B4C reinforcement on the various properties of aluminium matrix composites: a survey paper, Mater. Today Proc. 4 (2017) 2981–2988 [CrossRef] [Google Scholar]
  18. G.B. Veereshkumar, Assessment of mechanical and tribological characteristics of silicon nitride reinforced aluminium metal matrix composites, Compos. Part B: Eng. 175 (2019) 107138 [CrossRef] [Google Scholar]
  19. H.S. Vasanth Kumar, U.N. Kempaiah, M. Nagaral, K. Revanna, Investigations on mechanical behaviour of micro B4C particles reinforced Al6061 alloy metal composites, Indian J. Sci. Technol. 14 (2021) 1855–1863 [CrossRef] [Google Scholar]
  20. V.A. Anjan Babu, R. Saravanan, M. Raviprakash, M. Nagaral, Microstructure, tensile and flexural strength of boron carbide particles reinforced Al2030 alloy composites, Indian J. Sci. Technol. 14 (2021) 2342–2350 [CrossRef] [Google Scholar]
  21. M. Nagaral, V. Auradi, V. Bharath, Mechanical characterization and fractography of 100 micron sized silicon carbide particles reinforced Al6061 alloy composites, Metall. Mater. Eng. (2021). https://doi.org/10.30544/639 [Google Scholar]
  22. J.I. Harti, B.R. Sridhar, H.R. Vitala, P.R. Jadhav, Wear behavior of Al2219-TiC particulate metal matrix composites, Am. J. Mater. Sci. 5 (2015) 34–37 [Google Scholar]
  23. S. Matti, B.P. Shivakumar, S. Shashidhar, M. Nagaral, Dry sliding wear behavior of mica, fly ash and red mud particles reinforced Al7075 alloy hybrid metal matrix composites, Indian J. Sci. Technol. 14 (2021) 310–318 [CrossRef] [Google Scholar]
  24. T. Rajmohan, K. Palanikumar, S. Ranganathan, Evaluation of mechanical and wear properties of hybrid aluminium matrix composites, Trans. Nonferrous Metals Soc. China 23 (2013) 2509–2517 [CrossRef] [Google Scholar]
  25. M. Nagaral, V. Auradi, S.A. Kori, V. Hiremath, Investigations on mechanical and wear behavior of nano Al2O3 particulates reinforced AA7475 alloy composites, J. Mech. Eng. Sci. 13 (2019) 4623–4635 [CrossRef] [Google Scholar]
  26. K. Kalaiselvan, N. Murugan, S. Parameshwaran, Production and characterization of AA6061-B4C stir cast composite, Mater. Des. 32 (2011) 4004–4009 [CrossRef] [Google Scholar]
  27. P.R. Jadhav, M. Nagaral, S. Rachoti, J. Harti, Impact of boron carbide and graphite dual particulates addition on wear behavior of A356 alloy metal matrix composites, J. Metals Mater. Minerals 30 (2020) 106–112 [CrossRef] [Google Scholar]
  28. T.H. Raju, R.S. Kumar, S. Udayashankar, A. Gajakos, Influence of dual reinforcement on mechanical characteristics of hot rolled AA7075/Si3N4/graphite MMCs, J. Inst. Eng. Ser. D 102 (2021) [Google Scholar]
  29. T. Hemanth Raju, B.B. Chandan, S. Belagavi Vinaya, T.J. Udayashankar, A.K. Gajakosh, Influence of zircon particles on the characterization of Al7050-Zircon composites, Mater. Today Proc. 47 (2021) [Google Scholar]
  30. U.B. Krishna, B. Vasudeva, V. Auradi, Ma. Nagaral, Mechanical characterization and tensile fractography of Al7075-WCP-CoP composite, Frattura e Integrita Strutturale 60 (2022) [Google Scholar]
  31. G.L. Chandrasekhar, Y. Vijayakumar, M. Nagaral, C. Anilkumar, Microstructural evolution and mechanical behavior of 8 wt.% of nano B4C reinforced Al7475 alloy metal composites, Int. J. Vehicle Struct. Syst. 13 (2021) 1–6 [Google Scholar]
  32. Z. Ali, V. Muthuraman, P. Rathnakumar, P. Gurusamy, M. Nagaral, Studies on mechanical properties of 3 wt.% of 40 and 90 μm size B4C particulates reinforced A356 alloy composites, Mater. Today: Proc. 52 (2022) 494–499 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.