Open Access
| Issue |
Manufacturing Rev.
Volume 12, 2025
|
|
|---|---|---|
| Article Number | 2 | |
| Number of page(s) | 15 | |
| DOI | https://doi.org/10.1051/mfreview/2024021 | |
| Published online | 09 January 2025 | |
- M.E. Ryan, A. Dutta, Mathematical modeling of the blow‐molding process, Polym. Eng. Sci. 22 (1982) 1075–1083 [CrossRef] [Google Scholar]
- J.M. Dealy, N. Orbey, A model for parison behavior in the extrusion blow molding process, AIChE J. 31 (1985) 807–811 [CrossRef] [Google Scholar]
- R.W. Diraddo, A. Garcia-Rejon, Noncontact measurement of parison thickness profiles affected by swell and sag in continuous extrusion blow molding, Polymer Process. Rheol. 32 (1992) 1401–1410 [Google Scholar]
- J.-I. Takimoto, K. Koyama, S.-I. Tanifuji, Numerical analysis of parison formation process in extrusion blow molding, Seikei-Kakou 8 (1996) 590–598 [Google Scholar]
- K. Terada, M. Yamabe, S. Tanoue, T. Kajiwara, K. Funatsu, Application of numerical studies on polymer melt flow to blow molding technology. Part 1: A study on the parison swelling ratio, Seikei-Kakou 6 (1994) 803–810 [Google Scholar]
- M. Shinohara, T. Kajiwara, K. Funatsu, Calculation of parison formation behavior from laboratory measurement, Seikei-Kakou 9 (1997) 385–392 [CrossRef] [Google Scholar]
- S.-I. Tanifuji, T. Kikuchi, J.-I. Takimoto, K. Koyama, Overall numerical simulation of extrusion blow molding process, Polym. Eng. Sci. 40 (2000) 1878–1893 [CrossRef] [Google Scholar]
- D. Laroche, K.K. Kabanemi, L. Pecora, R.W. Diraddo, Integrated numerical modeling of the blow molding process, Polym. Eng. Sci. 39 (1999) 1223–1233 [CrossRef] [Google Scholar]
- A.-M. Yousefi, P. Collins, S. Chang, R.W. Diraddo, A comprehensive experimental study and numerical modeling of parison formation in extrusion blow molding, Polym. Eng. Sci. 47 (2007) 1–13 [CrossRef] [Google Scholar]
- A.-M. Yousefi, J. Den Doelder, M.-A. Rainville, K.A. Koppi, A modeling approach to the effect of resin characteristics on parison formation in extrusion blow molding, Polym. Eng. Sci. 49 (2009) 251–263 [CrossRef] [Google Scholar]
- H. Soeda, N. Mitsuishi, Y. Aoyagi, Discharge rates and velocity profiles for a non-new. tonian fluid in a concentric annular flow, Chem. Eng. 36 (1972) 186 [CrossRef] [Google Scholar]
- R.B. Bird, Transport Phenomena, Wiley 53 [Google Scholar]
- LS-DYNA Theory Manual. Livermore Software Technology Corporation 35–2 (Heat Transfer) [Google Scholar]
- S. Eggen, A. Sommerfeldt, On-line measurement of parison geometry during blow molding: parison swelling for three high-density polyethylenes with different molecular weights and molecular weight distributions, Polym. Eng. Sci. 36 (1996) 336–385 [CrossRef] [Google Scholar]
- P.L. Swan, M.R. Kamal, A. Garcia-Rejon, P. Cielo, Optical on-line measurement of the thickness distribution of blow molding parisons, Polym. Eng. Sci. 36 (1996) 985–992 [CrossRef] [Google Scholar]
- H.-X. Huang, J.-C. Li, Fast online acquisition and analysis for parison swell and sag in blow molding, J. Appl. Polym. Sci. 101 (2006) 2399–2406 [CrossRef] [Google Scholar]
- T. Kikuchi, T. Takahashi, K. Koyama, Temperature and pressure dependence of thermal conductivity measurements of high density polyethylene and low density polyethylene, Jpn. J. Polym. Sci. Technol. 60 (2003) 347–353 [Google Scholar]
- SCEJ The Society of Chemical Engineers (ed.), Modern Chemical Engineering II, Asakura Publishing Co., Ltd. (1989) 63 [Google Scholar]
- P.L. Swan, J.M. Dealy, A. Garcia-Rejon, A. Derdouri, parison swell: a new measurement method and the effect of molecular weight distribution for a high density polyethylene, Polym. Eng. Sci. 31 (1991) 705–710 [CrossRef] [Google Scholar]
- S. Tanoue, Y. Iemoto, Effect of die gap width on annular extrudates by the annular extrudate swell simulation in steady-states, Polym. Eng. Sci. 39 (1999) 2172–2180 [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.