EDP Sciences logo
Submit your paper
Search
Menu
Home All issues Volume 9 (2022) Manufacturing Rev., 9 (2022) 28 References
Open Access
Issue
Manufacturing Rev.
Volume 9, 2022
Article Number 28
Number of page(s) 15
DOI https://doi.org/10.1051/mfreview/2022026
Published online 03 October 2022
  1. M.R. Rezaei, A. Albooyeh, M. Shayestefar, H. Shiraghaei, Microstructural and mechanical properties of a novel Al-based hybrid composite reinforced with metallic glass and ceramic particles, Mater. Sci. Eng. A 786 (2020) 139440 [CrossRef] [Google Scholar]
  2. D. Das, V. Chakraborty, A.K. Chaubey, R.K. Nayak, Investigation on properties of SiC reinforced Zn-Mg-Cu based Al metal matrix composites − a case study, Mater. Today: Proc. 5 (2018) 19874–19882 [CrossRef] [Google Scholar]
  3. X. Zhao, D. Gu, C. Ma, L. Xi, H. Zhang, Microstructure characteristics and its formation mechanism of selective laser melting SiC reinforced Al based composites, Vacuum 160 (2019) 189–196 [CrossRef] [Google Scholar]
  4. R.K. Sundaram, N. Sivashanmugam, D. Shameer, R. Deepak, G. Saikrishnan, Experimental investigation of mechanical properties and drilling characteristics on polymer matrix composite materials, Mater. Today: Proc. 43 (2021) 1057–1063 [CrossRef] [Google Scholar]
  5. C.I. Pascu, Ş. Gheorghe, A. Rotaru, C. Nicolicescu, N. Cioateră, A.S. Roșca, D. Sârbu, P. Rotaru, Ti-based composite materials with enhanced thermal and mechanical properties, Ceram. Int. 46 (2020) 29358–29372 [CrossRef] [Google Scholar]
  6. U.K.A.V. Kumar, Method of stir casting of aluminum metal matrix composites: a review, Mater. Today: Proc. 4 (2017) 1140–1146 [CrossRef] [Google Scholar]
  7. V. Bharath, M. Nagaral, V. Auradi, S.A. Kori, Preparation of 6061Al-Al2O3 MMC's by stir casting and evaluation of mechanical and wear properties, Proc. Mater. Sci. 6 (2014) 1658–1667 [CrossRef] [Google Scholar]
  8. A.K. Sahoo, S. Pradhan, A.K. Rout, Development and machinability assessment in turning Al/SiCp-metal matrix composite with multilayer coated carbide insert using Taguchi and statistical techniques, Arch. Civil Mech. Eng. 13 (2013) 27–35 [CrossRef] [Google Scholar]
  9. J. Udaya Prakash, P. Sivaprakasam, I. Garip, S. Jebarose Juliyana, G. Elias, G. Kalusuraman, I. Colak, Wire Electrical Discharge Machining (WEDM) of hybrid composites (Al-Si12/B4C/Fly ash), J. Nanomater. 2021 (2021) Article ID 2503673 [Google Scholar]
  10. P. Sivaprakasam, J. Udaya Prakash, P. Hariharan, S. Gowri, Micro-electric discharge machining (Micro-EDM) of aluminium alloy and aluminium matrix composites − a review, Adv. Mater. Process. Technolog. (2021) in press. DOI: 10.1080/2374068X.2020.1865127 [Google Scholar]
  11. A. Arul Daniel, S.R. Pugazhenthi, R. Kumar, S. Vijayananth, Multi objective prediction and optimization of control parameters in the milling of aluminium hybrid metal matrix composites using ANN and Taguchi-grey relational analysis, Defence Technol. 15 (2019) 545–556 [CrossRef] [Google Scholar]
  12. R. Tharmaraj, M.J. Davidson, Effect of titanium in aluminium matrix on densification and forming limit of P/M composites during upsetting process, J. Braz. Soc. Mech. Sci. Eng. 42 (2020) 1–13 [CrossRef] [Google Scholar]
  13. J.Z. Zhang, J.C. Chen, Surface roughness optimization in a drilling operation using the Taguchi design method, Mater. Manuf. Process 24 (2009) 459–467 [CrossRef] [Google Scholar]
  14. M. Ratnam, Factors affecting surface roughness in finish turning, Comprehensive materials finishing, Elsevier Science & Technology, Amsterdam (2017) [Google Scholar]
  15. P. Shanmughasundaram, R. Subramanian, Study of parametric optimization of burr formation in step drilling of eutectic Al-Si alloy-Gr composites, J. Mater. Res. Technol. 3 (2014) 150–157 [CrossRef] [Google Scholar]
  16. S.-L. Ko, J.-K. Lee, Analysis of burr formation in drilling with a new-concept drill, J. Mater. Process. Technol. 113 (2001) 392–398 [CrossRef] [Google Scholar]
  17. J.P. Davim, A. MonteiroBaptista, Cutting force, tool wear and surface finish in drilling metal matrix composites, Proc. Inst. Mech. Eng. E 215 (2001) 177–183 [CrossRef] [Google Scholar]
  18. S.T. Huang, L. Zhou, J. Chen, L.F. Xu, Drilling of SiCp/Al metal matrix composites with polycrystalline diamond (PCD) tools, Mater. Manufactur. Process. 27 (2012) 1090–1094 [CrossRef] [Google Scholar]
  19. A. Jayaganth, K. Jayakumar, A. Deepak, K. Pazhanivel, Experimental studies on drilling of 410 stainless steel, Mater. Today: Proc. 5 (2018) 7168–7173 [CrossRef] [Google Scholar]
  20. E. Salura, A. Aslanb, M. Kuntoglub, A. Gunesc, O. SinanSahin, Experimental study and analysis of machinability characteristics of metal matrix composites during drilling, Compos. Part B 166 (2019) 401–413 [CrossRef] [Google Scholar]
  21. E. Ekici, A.R. Motorcu, G. Uzun, An investigation of the effects of cutting parameters and graphite reinforcement on quality characteristics during the drilling of Al/10B4C composites, Measurement 95 (2017) 395–404 [CrossRef] [Google Scholar]
  22. A. Noorul Haq, P. Marimuthu, R. Jeyapaul, Multi response optimization of machining parameters of drilling Al/SiC metal matrix composite using grey relational analysis in the Taguchi method, Int. J. Adv. Manufactur. Technol. 37 (2008) 250–255 [CrossRef] [Google Scholar]
  23. S. Ponnuvel, T.V. Moorthy, Multi-criteria optimisation in drilling of epoxy/glass fabric hybrid nanocomposite using grey relational analysis, Appl. Mech. Mater. 446 (2014) 180–187 [Google Scholar]
  24. T. Rajmohan, K. Palanikumar, Experimental investigation and analysis of thrust force in drilling hybrid metal matrix composites by coated carbide drills, Mater. Manufactur. Process. 26 (2011) 961–968 [CrossRef] [Google Scholar]
  25. A.A. Daniel, S.R. Pugazhenthi, R. Kumar, S. Vijayananth, Multi objective prediction and optimization of control parameters in the milling of aluminium hybrid metal matrix composites using ANN and Taguchi-grey relational analysis, Defence Technol. 15 (2019) 545–556 [CrossRef] [Google Scholar]
  26. C. Sarala Rubi, J. Udaya Prakash, C. Rajkumar, Optimization of process parameters using taguchi technique for drilling aluminium matrix composites (LM6/B4C), IOP Conf. Ser.: Mater. Sci. Eng. 912 (2020) 032016 [CrossRef] [Google Scholar]
  27. C. Sarala Rubi, J. Udaya Prakash, Drilling of hybrid aluminum matrix composites using Grey-Taguchi Method, INCAS Bull. 12 (2020) 167–174 [Google Scholar]
  28. K. SooryaPrakash, P.M. Gopal, S. Karthik, Multi-objective optimization using Taguchi based grey relational analysis in turning of rock dust reinforced aluminum MMC, Measurement 157 (2020) 107664 [CrossRef] [Google Scholar]
  29. E. Franczyk, L.Slusarczyk, W. Zebala, Drilling Burr minimization by changing drill geometry, Materials 13 (2020) 1–12 [Google Scholar]
  30. M. Aamir, K. Giasin, M. Tolouei-Rad, A. Vafadar, A review: drilling performance and hole quality of aluminium alloys for aerospace applications, J. Mater. Res. Technol. 9 (2020) 12484–12500 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.